Quantcast
Making a Ghillie Suit - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Player > Concealment
Concealment Tips on Hides, Painting, Ghillies, and Rifle Wraps.

Like Tree2Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 11-10-2010, 06:20 PM   #1
 
fuzzywolly's Avatar
 
Join Date: Mar 2010
Location: York, PA
Posts: 3,288
Making a Ghillie Suit

I have had a few people ask me how I made my ghillie from various forums. While I made mine a certain way, that does not mean there are not other ways to make a ghillie. In fact, there are so many options and different styles of ghillies out there. Which brings me to my first section.

Remember: As you read along, make sure to think about these questions and apply it to your situation. Mine is just an example!


Deciding what ghillie to make: The Layout/Planning Period


When I was deciding how to make my ghillie, I thought about the area I played in, and my style of play. For me, I play in PA, with lush green vegetation in the warmer months, and brown dead stuff in the colder months. I wanted to be able to use my ghillie all year round, so I needed to take into account, how I would be able to do so, without having to make drastic changes each season. In order to do so, I had to think about a few important things.

Color
1) You can easily make your ghillie darker by adding vegetation. But a ghillie that is dark in colors, makes things more difficult, for making it lighter, is not as easy. Therefore, my base color should not be any dark greens. Remember, I need to be able to use it in both the summer and winter. Having a green base would cause me to stick out during the colder season. That would defeat the purpose of a ghillie ::) This lead me to the conclusion that my base color would be tan. This is very easy to darken up by adding some vegetation. It also blends in fairly well with the earth, and dry leaves when cold season hits.

2) What other colors to add? Realizing that I have a tan base, going with some green would help blend in with the surrounding vegetation. But be careful, too much will result in you having to remove it during the winter months. This is something I did not want to have to do, so I had to use green sparingly. For you, it might be different.

With that said, my plan was to add green randomly onto the netting. I was cautious in tying the jute on. After all, its easier to go back and put more on, then to take it off, which is kind of a pain (repetitive).

Now its time to think about any other colors you want to add. For me, I wanted some brown, but not alot of it. Reason being, I like my ghillie dirty as hell. The tan jute gets covered in mud, to break it in. But I typically leave some of it on, rather than washing it off. After all, "no one likes a clean ghillie :(" title="" border="0"/> " Therefore, alot of brown is not necessary. My plan involved keeping the base color tan, and thats exactly what I did.

Type of ghillie

This is important. Like I said above, there are so many different options. Below you will see, I made a ghillie that is used primarily for prone situations. The jute is only on the back of the jacket and the pants. I did this to help eliminate getting entirely tangled in twigs, prickers, and other sticks and stuff Not only that, but I planned on being in prone most of the time, which is when the suit I made is most affective. Other pros are more mobility, easy access to pouches in front (no jute in the way), and isn't as hot to wear as a full suit is. However, cons include not really useful for stalking. The front is just a normal BDU, with no jute attached. Going prone is a better option, if trying to use this ghillie most efficiently.

How much time do you have?

Plain and simple. Do you have the time and energy to make one of these bad boys. Getting halfway done and then quitting would leave you with nothing but lost time and money. Get this in your head. You will get frustrated, especially if this is your first time. Its normal, just take a break, relax, and go back to work later. Do not wear yourself out. These things take time, patience, and diligence. If you cannot be patient enough to make one, then you should probably not be in the sniper role, or itleast stick to the urban setting ;)

Supplies

Here is one of the most important parts, the supplies. Here is a basic list of what you need. I even threw together a picture for you :-*

List:
1. BDU (pants, jacket, boonie): Found everywhere!
2. Floss (non-scented) or strong sewing thread: Walmart
3. Needle or two (in case one breaks): Walmart
4. Jute and/or burlap: Found at walmart and home depot
5. Shoe Goo: Check wal-marts shoe department section
6. Ruler: Your desk...duh. Why a ruler? I use it to measure the length of my jute. I cut various lengths, and use the ruler to get a good estimate of what lengths I am cutting. I go for between 16 inches and 24 inches.
7. Scissors: Your desk
8. Marker: Comes in handy sometimes. Always good to have one on hand. Not completely necessary, I found some use for it.
9. Clock: Found in the picture, it represents all the time you are going to need
10. Netting: I used 1in x 1in netting. Works great, I love it. Found it at michaels store.
11. Bin for dying the jute: Just make sure to take out the stuff inside it first ::)





Now you have the supplies together, its time to get to work!

Making the ghillie
I started off with the jacket
1. First you want to lay the netting over top of the BDU. Depending on how you make your ghillie, pay close attention to where you cut. I went to the border of the back of the jacket, and then cut. Make sure to stretch the netting out and not let it sag. For the arm portion of the jacket, wrap the netting slightly around over the top. When you put the jacket on, the netting sinks down behind you, and if you did not wrap the netting over top like I told you, it will sink to far behind you, leaving your shoulder area, and arm uncovered.



See how netting was wrapped around?



Notice how the picture above, the netting goes to the edge, and is tied/glued down.

2. Once finished cutting, go ahead and make sure its all aligned correctly. Now start doing a perimeter of sewing down the netting. This makes sewing the rest of the netting down ten times easier. Note that you do not have to sew each small square down. Just enough so that if you pinch the netting, only a little bit of it can be pulled up.





The floss is used to sew the netting down. Do not apply the shoe goo yet. Wait til the end to do that part. I typically sew the floss down, wrapping it around three or four times.

3. The perimeter does not go up past the collar. Just put the netting up below this, sew it down and you are good. See below.



4. Now you have the netting tied down on the perimeter. Go ahead and sew the rest of the netting on the rest of the jacket. It will take awhile. This part is fun at first, then it just gets so boring. Take breaks every thirty minutes to an hour. Talk a walk, get a drink, or just do something (make sure its legal ;) ) to get your mind off the ghillie so it can rest.

5. Repeat this process with the pants. One thing I like to do, is to wrap the netting around the pants a few inches. When you put the pants on, the netting will wrap around, just enough to cover the back side, along with the side of your legs as well. This is what you want. In addition, do not tie netting to the very bottom of the pants. Its not necessary. The jute will hang down 8 inches or so. The same applies to the top part of the pants. The jute will hang down from the jacket. Do not apply netting to the top part. Jute hangs down, so no netting is required there.






See how there is no netting at the top of the pants. The jute from the jacket will hang down.


See how the netting stops short of the bottom


The jute will hang down.






The netting is wrapped slightly to the front. Trust me, it looks dumb otherwise.

Start by sewing a perimeter, and then sew down the rest.

6. You can either do the boonie now, or do it later. Your choice. I get tired of sewing, and usually take a break and work on glueing, and tying jute. The boonie just needs netting to wrap around the brim and up to the top, covering it completely. Let the netting hand down in the back around 8 inches. On the side, about 4 inches. And alittle to none in the front.







7. Now its time to shoe glue. I do this to ensure the floss does not come undone. This creates a very durable ghillie that you can be confident in using on the field. Place alittle dab of glue over top of the floss. Let it dry for a day. Then you can go back to work on the ghillie. The glue will dry completely in three days, but after a day, you can handle it lightly.

8. While the glue dries, you can dye your jute. That is if you are using any different colors other than the base tan.

The bin pictured above, found at walmart, is great for placing your jute in when dying it. There are specific directions on the bottle of your dye, but I simply did the following. (I cut my jute before dying)
1. Start up some water, and place in the bin. I like the water hottt!
2. Pour some dye into the water. Just do alittle. Not much is needed. Depending on the amount of jute being dyed, it will vary. Just apply alittle, and stir it up. If the water is still clear, apply some more.
3. Put that jute in there! Stir it once and awhile for fifteen minutes. Make sure that jute gets dyed completely.
4. Get a bucket of cold water. Take the jute out of the dyed water, and squeeze out access. Place in the cold bucket. Rinse completely. The water squeezed from the jute should be clear.
5. Let it airdry. Put the jute in the sun.
6. Its dry! Now lets tie it to the netting. This is the fun part!

9. Tie the jute to the netting. I applied a base of two strands of tan jute to every other five squares of 1 in netting. Do this to the top of the ghillie.

Now apply some green, brown, or whatever other colors you are using. Make sure your base color is the one you tie on most. Remember, a lighter ghillie can be darkened using vegetation. Its very hard to make a dark ghillie lighter. Also, check out your environment, and apply what you think will work best.

10. Look at your ghillie. Fill in spots that need to be filled. Are the secondary colors applied randomly across the base color of the ghillie?

Congrats, your ghillie is "technically" finished. Now for the best part EVA!

11. Wear the ghillie in. My favorite part To do so, make a mud hole. Filled with water, mud, leaves, bugs (they come with the mud), and other crap (not literally!) rub it all over your ghillie. If you made it right, don't worry, it won't fall apart.

12. Now let the mud dry onto the ghillie. Let it sit for awhile. Watch out for creepy crawlers. Ghillies make great homes for bugs, spiders, and deer....ok, not deer. But you get the point.

13. Finished? No, do step 11 and 12 a few more times. Then do it again after that. No one likes a clean ghillie.

14. Now you are finished. Go grab a drink, sit down, and take a nap. You deserve it.

Tips


1. Buy lots of jute. I bought around 12 of the jute packs (which are cheap). Keep in mind that fills the back of the jacket, pants, boonie, and alittle for the rifle wrap as well.
2. Take your time, do not rush. Making a ghillie is a long process. Its totally worth it in the end though ;)
3. Be organized. Have the supplies together before starting.
4. Buy shoe goo. This stuff is great. Works much better than regular glue.
5. Observe your environment. See what colors work best for you. Every place is slightly different. My experience is an example, not a rule you have to follow. I prefer having a ghillie that can be successful year round. Others might only want a ghillie that works in a specific environment.
6. Add vegetation. A ghillie is 60% veg, 39% jute/burlap, and 1% bugs and crap.

My ghillie:









My assistant







Making a rifle wrap


Depending on the time of year, vegetation may or may not be available to use. In the winter months, most of the veg is dead, resulting in me using a burlap wrap. Simple, yet effective.

During the summer months, natural veg is my best friend, along with some rubber bands.

When adding the veg, just make sure not to have it get in the way of your view through the scope. Apply the vegetation by placing it between the rubber bands. I typically cover the outer barrel and the scope.

Summer month wrap:





Winter months wrap



Snipingroses and Elias like this.
  Reply With Quote
Members that say thanks to fuzzywolly for this post: Bushmaster Recon, CantankerousClay, king..kranium
Remove Ads
Old 11-10-2010, 08:17 PM   #2
Jr. Sniper
 
hidden187's Avatar
 
Join Date: Sep 2010
Location: San Diego, CA
Posts: 445
Making a Ghillie Suit

__________________
Quote:
Originally Posted by woogie View Post
Semi is much better anyway!!! If you can't hit your target in 1 or 2 shots,then go play hopscotch.
  Reply With Quote
Old 11-13-2010, 10:34 AM   #3
 
Join Date: Jul 2009
Location: Tennessee
Posts: 1,103
Making a Ghillie Suit

Thanks for making this!
  Reply With Quote
Old 11-20-2010, 12:59 PM   #4
Jr. Sniper
 
soldierofvalor's Avatar
 
Join Date: Oct 2010
Posts: 117
Making a Ghillie Suit

As this is a recent thread, I figured I could post this question here: "What is the best way for attaching natural vegetation to your suit, rifle, and/or gear?" What I've done so far when using ghillie, is attempted to cram tall, dead grass, and various dry environment plants in through the netting. This method is faulty for me for three reasons: 1. It is way too much of a hassle to get the veg in the suit 2. I find I can't get enough veg in the suit in the first place 3. The veg usually comes out a little more quickly than I would like. If anyone would mind sharing their methods or ideas, I would greatly appreciate it. Thanks!
  Reply With Quote
Old 11-20-2010, 03:32 PM   #5
 
fuzzywolly's Avatar
 
Join Date: Mar 2010
Location: York, PA
Posts: 3,288
Making a Ghillie Suit

As far as attaching veg goes, I tried using elastic bands that were wrapped around the netting and then placed veg in them. However, a bunch of them fell out after a game. I had been tying veg in with the jute, but plan on doing something with elastic bands again. Thinking of glueing the bands to the netting, which will keep them from coming out. That way I do not have to replace them each game.
  Reply With Quote
Old 11-20-2010, 08:35 PM   #6
Young Gun
 
Join Date: Jun 2010
Posts: 89
Making a Ghillie Suit

http://www.airsoftsniperforum.com/ph...pic.php?t=1182

Here is how I apply Rafia (fake dry grass); sorry my pictures suck.
  Reply With Quote
Old 11-21-2010, 03:50 AM   #7
Young Gun
 
Join Date: Nov 2010
Posts: 16
Making a Ghillie Suit

Thanks Fuzzywolly, That has to be the greatest ghillie tutorial I have seen thus far.
  Reply With Quote
Old 11-25-2010, 07:57 PM   #8
pkidd   pkidd is offline
Jr. Sniper
 
pkidd's Avatar
 
Join Date: Apr 2010
Location: Alabama
Posts: 124
Making a Ghillie Suit

Okay, first off great tutorial. But I have a question. When sewing the netting onto the BDU's what knot did you use? Also did you cut small sections of floss for each knot, or did you have a continuous section of floss for a couple of rows? Thanks!!
  Reply With Quote
Old 11-25-2010, 08:17 PM   #9
gsc   gsc is offline
Young Gun
 
Join Date: Nov 2010
Posts: 18
Making a Ghillie Suit

Great write up. The rifle wraps look great. Sometimes less is better.

I have also written a free ebook on making a ghillie suit. The main difference is that you buy the cheaper ghillie blankets and use them to make the ghillie suit. This way the tedious part is done for you. All you have to do is cut the blanket and attach it to your jacket and pants.

You can download it at the link below. If this is out of line please let me know.

http://www.ghilliesuitclothing.com/g...thingebook.pdf


  Reply With Quote
Old 04-13-2011, 01:01 AM   #10
Young Gun
 
Join Date: Apr 2011
Posts: 19
Making a Ghillie Suit

Apart from this taking all the "fun" out of making a ghillie, gsc's tactic is a pretty good one.

My only issue with the end result is all that fluff on the front of your suite. Call me a purist but if I'm wearing a full ghillie, I'd MUCH rather be crawling than walking and IF I'm walking, it's in neutral ground where there is no chance of being spotted. Seems to me then, that a full ghillie with a padded belly is more useful than a Sasquatch suite.

Also, in my experience, most sights sell darker suites and suite materials. I'm with Fuzzywolly in that it's much easier to darken a suite than lighten it, so in general I feel it's best to go with lighter colors on a full ghillie.

There's my 2 cents!
  Reply With Quote
Old 04-13-2011, 07:48 PM   #11
Young Gun
 
Join Date: Feb 2011
Location: Virginia
Posts: 21
Making a Ghillie Suit

Speaking as someone who has had to lighten a ghillie: it is difficult. But for those who do need to lighten, bleach works.
That being said, bleach turned my burlap a sickly yellow-orange color, which I then needed to re-dye and yadda yadda yadda, it was a pain in the neck.

As for attaching veg, one thing I've had good success with are hair bands. I had a bunch around from when I had long hair back in high school (it was stupid, I know, but it was for that Locks of Love thing). They had good color and they gripped the veg really well.
  Reply With Quote
Old 04-13-2011, 08:30 PM   #12
 
Join Date: Jan 2011
Location: Anchorage, Alaska
Posts: 2,258
Making a Ghillie Suit

I just left a bunch of space in my netting - mine is only .5 inch squares - and I will be stuffing grass, etc. in there.
__________________


PLEASE READ THE RULES
  Reply With Quote
Old 04-13-2011, 08:41 PM   #13
 
fuzzywolly's Avatar
 
Join Date: Mar 2010
Location: York, PA
Posts: 3,288
Making a Ghillie Suit

Dental floss is an amazingly easy way to attach veg to your ghillie. Just use it to tie on veg. I always carry a pack of dental floss on the field with me.
  Reply With Quote
Old 04-13-2011, 08:47 PM   #14
Veteran Sniper
 
inthetallgrass's Avatar
 
Join Date: Jan 2011
Location: Ireland
Posts: 2,196
Making a Ghillie Suit

An it's handy if your teeth are at you from chewing steak earlier mid-game! ;)
__________________
I enjoy the sport, GO IRELAND.

OUT my silencing guide
http://www.airsoftsniperforum.com/44-others/1990-ultimate-guide-silence-your-type-96-others.html
  Reply With Quote
Old 04-13-2011, 08:52 PM   #15
 
fuzzywolly's Avatar
 
Join Date: Mar 2010
Location: York, PA
Posts: 3,288
Making a Ghillie Suit


Quote:
Originally Posted by inthetallgrass
An it's handy if your teeth are at you from chewing steak earlier mid-game! ;)
Well that's the main reason I carry it on the field.
  Reply With Quote
Reply


Search tags for this page

a-tacs

,
adding rubber band to ghillie suit
,
airsoft ghillie snipers
,
airsoft ghillie suit fuzzywolly
,
best way to put jute on gilly suit
,

elastic ghillie how to tie

,

ghillie suit forum

,
green ghillie with dcu base
,
homemade jute netting ghillie suit
,
how to make a airsoft sniper ghillie
,
how to make ghillie hat
,
rafia ghille suit
Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ghillie making tutorial (Finished) pvt13 Concealment 54 12-31-2013 06:11 AM
Making a Ghillie Suit fuzzywolly Concealment 9 11-04-2013 01:50 PM
My ghillie suit. Bigmac Concealment 7 03-10-2013 06:59 AM
Ghillie suit help MikkelWolf Concealment 24 12-04-2012 04:18 PM
Suggestions for making a storebought ghillie work? mav3r1ck Concealment 7 04-20-2011 09:17 PM



All times are GMT -5. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.