CA M14 Cylinder Head - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > Classic Army Rifles
Classic Army Rifles CA rifles

Reply
 
LinkBack Thread Tools Display Modes
Old 11-14-2016, 03:19 AM   #1
shaddow   shaddow is offline
Young Gun
 
Join Date: Sep 2016
Posts: 19
CA M14 Cylinder Head

Any advice what cylinder head will fit the Classic Army M14?

I have upgraded all other parts, and ordering cylinder and cylinder head this week.

From pictures, it looks like a V6 most closely resembles the CA cylinder head. But from a few posts, people seem to say the V7 cylinder head.
The V7 has cut outs top and bottom of the head (Only has walls on 2 sides).
The V6 looks more like the stock cylinder head with only the one side cut away, and the nozzle side having recess cut into the wall. (Hope this makes sense.)

On both V6 and V7, the air nozzle is off centre, but again the V7 looks to be closer to the edge compared to the V6 and the stock part. (But this is going by google image and website pictures).

Any advice from anyone who has upgraded the cylinder head in an M14?
  Reply With Quote
Remove Ads
Old 11-14-2016, 06:25 AM   #2
cetane   cetane is offline
Jr. Sniper
 
cetane's Avatar
 
Join Date: May 2013
Location: Markham & Stouffville, Ontario, Canada
Posts: 281
This will:

Lonex Aluminum Cylinder Head for Ver.7 CA/G&G M14 [GB-01-60] - $19.80 : Airsoft Store Canada, High-End Parts for High-Speed Operators

If you're in usa, you can probably find it from another retailer.
  Reply With Quote
Old 11-15-2016, 07:00 AM   #3
shaddow   shaddow is offline
Young Gun
 
Join Date: Sep 2016
Posts: 19
Does this mean any V7 cylinder head will fit?
  Reply With Quote
 
Old 11-15-2016, 11:08 AM   #4
cetane   cetane is offline
Jr. Sniper
 
cetane's Avatar
 
Join Date: May 2013
Location: Markham & Stouffville, Ontario, Canada
Posts: 281
Quote:
Originally Posted by shaddow View Post
Does this mean any V7 cylinder head will fit?
No. the g&g & ca version 7 gearboxes have the nozzle in about the same spot as a regular version 6 gearbox.
  Reply With Quote
Old 11-15-2016, 11:10 AM   #5
shaddow   shaddow is offline
Young Gun
 
Join Date: Sep 2016
Posts: 19
Ok. So if I bought a v6 cylinder head it should work ok? From pictures the V6 also looks near identical to the stock one I have.


Sent from my iPhone using Tapatalk
  Reply With Quote
Old 11-15-2016, 11:58 AM   #6
cetane   cetane is offline
Jr. Sniper
 
cetane's Avatar
 
Join Date: May 2013
Location: Markham & Stouffville, Ontario, Canada
Posts: 281
You may have to do like this guy did...


http://roosterteeth.com/post/2905434



Source for lonex one in USA:
http://www.clandestineairsoft.com/cy...m14-p-168.html
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to get maximum Joule Creep from an AEG 1tonne Longrange AEGs 89 02-06-2017 01:24 PM
VSR 10 - Edgi Cylinder Head + Maple Leaf Bucking Issue Homie VSR Rifles 15 09-20-2016 10:26 PM
VSR 10 - Edgi Cylinder Head + Maple Leaf Bucking Issue Homie VSR Rifles 0 09-17-2016 02:56 PM
PDI Taper Cylinder head will fit stock cylinder akprincehbd VSR Rifles 1 08-04-2016 04:33 AM
Alternative to cylinder porting? Yankee0 VSR Rifles 17 07-19-2016 04:10 AM



All times are GMT -5. The time now is 06:09 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.