Quantcast
M190 vs. M170 Spring - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > VSR Rifles
VSR Rifles TM VSR's

Like Tree1Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 04-19-2012, 09:56 AM   #1
xyz   xyz is offline
Young Gun
 
Join Date: Apr 2012
Posts: 9
M190 vs. M170 Spring

Ok, pretty straightforward question. What are your opinions on an M190 spring vs. an M170. Neither will break my gun, my internals are strong enough. I know I'll get more FPS with the M190 but how much accuracy will I be sacrificing. I have a nineball bucking in by the way.
  Reply With Quote
Remove Ads
Old 04-19-2012, 10:49 AM   #2
MGunner   MGunner is offline
Experienced Sniper
 
MGunner's Avatar
 
Join Date: Feb 2011
Posts: 1,032
Go with the M170 and fix all your airleaks. The M190 is impossible to pull while prone.
  Reply With Quote
Old 04-19-2012, 11:29 AM   #3
Young Gun
 
suomijorma's Avatar
 
Join Date: Jul 2011
Location: Finland, Rovaniemi
Posts: 83
I can pull my m190 easily :p But I agree with MGunner, its pointless to put a huge spring if your gun has airleaks. Bigger spring = Bigger leaks
Btw. if you fix all the leaks its possible to get the m170spring chrono over 190m/s ;) Mine has an m190 and it shoots at 225m/s
  Reply With Quote
Old 04-24-2012, 02:28 AM   #4
Jr. Sniper
 
SilentScope's Avatar
 
Join Date: Mar 2012
Location: USA
Posts: 384
Quote:
Mine has an m190 and it shoots at 225m/s
M190 @ 740+FPS with 0.20g bb's?
__________________
Type 96:
Full LL Internals
PDI Hop-up
Prommy TBB

Mods:
Bucking-Teflon/Flat-hop/Silicone Seal
Cylinder Head-Teflon/Waxed/Tapered/Polished/Sorbo Padded
Hop-up Arms-Dental Flossed/Shimmed
Hop-up Chamber-
Custom Booster Spring/Shimmed Nub
Inner Barrel-Wax Spacer
Spring-Electrical Taped
Spring Guide-Custom bearings
Stock/Upper Receiver-Clay and Foam Mod/Air-tight Seal
Zero Trigger-Very light bolt pull mod/Sound Proof

Performance(ATM):
250ft Effective
300ft+ Max
525FPS w/0.20g; 0.43g Tuned
  Reply With Quote
Old 04-24-2012, 12:11 PM   #5
Young Gun
 
suomijorma's Avatar
 
Join Date: Jul 2011
Location: Finland, Rovaniemi
Posts: 83
The gun chrono'd at 155m/s with 0,40g bb's and it's about 720fps with 0,20g, not bad I think but ofcourse I'm not gonna play with it because I have a conscience of some kind :D
  Reply With Quote
Old 05-13-2013, 06:42 AM   #6
Young Gun
 
Join Date: May 2013
Posts: 6
oups why you made a rifle like that??? :P

Do you think you would use it for long range?

Last edited by shadowmaniac; 05-13-2013 at 06:45 AM.
  Reply With Quote
Old 05-13-2013, 06:53 AM   #7
Young Gun
 
Join Date: May 2013
Posts: 6
Anyway, I recently bought a WELL MB03. I'm a new sniper and I want to upgrade it a litle bit... cause I'm planning to buy an other sniper rifle in the future I would like to keep the budjet really low.

So does anyone know what I should buy first ? I need to be at the 500 to 550 fps range with .20 bbs. Is it good to start with a M170 spring ?
  Reply With Quote
Old 05-13-2013, 10:06 AM   #8
Veteran Sniper
 
Masterjuggler98's Avatar
 
Join Date: Apr 2012
Location: New Jersey
Posts: 2,842
Send a message via Skype™ to Masterjuggler98
First go make an intro post. Second, check the dates of the last few posts. After you make an intro post, if you have a question, start a new thread.
  Reply With Quote
Old 05-13-2013, 12:07 PM   #9
remali   remali is offline
Young Gun
 
Join Date: May 2013
Location: athens Greece
Posts: 6
I am an owner of a jg bar 10 , that is all upgraded with marui vsr10 parts. M170 with 0.2 is about 530 fps. I also tested m140 that it was about 480 fps. M170 is harder to pull than the m140 from prone. I will try M145 during this week and I will let you know my results. Maybe you can also use a small spacer on the spring guide. A spacer no longer than 8mm combined with my m170 spring shoots 560fps!
__________________
DARK ANGELS GREEK AIRSOFT TEAM
https://www.facebook.com/groups/128982103826235/
  Reply With Quote
Old 05-17-2013, 01:33 PM   #10
remali   remali is offline
Young Gun
 
Join Date: May 2013
Location: athens Greece
Posts: 6
I have just finished with the instalation of an element m145 spring on my bar 10 with a small spacer on the spring guide. The results are 590 fps. As I said above with the m170 and the spacer I had about 560 fps....Any ideas?
__________________
DARK ANGELS GREEK AIRSOFT TEAM
https://www.facebook.com/groups/128982103826235/
  Reply With Quote
Old 05-17-2013, 03:27 PM   #11
Jr. Sniper
 
Join Date: Apr 2013
Posts: 229
Quote:
Originally Posted by remali View Post
I have just finished with the instalation of an element m145 spring on my bar 10 with a small spacer on the spring guide. The results are 590 fps. As I said above with the m170 and the spacer I had about 560 fps....Any ideas?
It's a new spring, so higher FPS is expected until it wears down. I think a new element M170 clocks in at around 650 FPS.
__________________
VSR 10 "Invincible" Scout Rifle -
Internals
TM Precision Chamber w/ TDC
Dangerwerx Arm w/ M nub
PDI 6.01 303mm Bull Barrel w/ IR hop
King Arms Steel Cylinder / Cylinder Head
PDI Cylinder Components w/ RTV Silicone
PDI 330% Spring
PDI V2 V Trigger
Externals
PDI Bull Barrel Base / G sized / Cap
PDI Stock Screws x3
PDI Receiver / TM Scope Rail
PDI Aluminum Trigger Guard
Laylax VSR 10 Bolt Handle
UTG BugBuster 3-9x32 AO Scope
  Reply With Quote
Old 05-17-2013, 05:15 PM   #12
DK   DK is offline
Young Gun
 
Join Date: Feb 2012
Posts: 3
Quote:
Originally Posted by MGunner View Post
Go with the M170 and fix all your airleaks. The M190 is impossible to pull while prone.
Really?
I can easily pull LL M190 spring in prone position, it's technic thing not the power of your arm.
And there was no airleaks with KMHEAD hopup - with custom made antiblowup ring (near to the air nozzle, end of rubber i sealed with fish line).

But, for example LL springs are so undurable. After first install of spring it were lost almost 5 cm in lenght, and fps in 5 to 9 first shoots were above 760 fps. Then it fell to about 680 fps, and they're the same till this day.

Range of rifle is nothing, without accuracy. And accuracy is basic thing of your rifle.
The major thing which decides about efficiency of your rifle is precision. To achieve accuracy you need to change barrel, hop up rubber and well assembled hopup unit. After finishing this steps you can thing about rising your fps, which decides about the range of your rifles.

Last edited by DK; 05-17-2013 at 05:31 PM.
  Reply With Quote
Old 05-18-2013, 12:21 AM   #13
Advanced Sniper
 
Dorekido's Avatar
 
Join Date: Mar 2012
Location: Earth
Posts: 735
I thought any over 550fps is forbidden in this forum ?
__________________
finding new things ?
  Reply With Quote
Old 05-18-2013, 04:56 AM   #14
Jr. Sniper
 
WhiteDeath1's Avatar
 
Join Date: Feb 2013
Location: Ireland
Posts: 163
Shove in an M130 Spring and R hop your gun. You don;t need that ridiculous amount of FPS.
__________________
Blah Marui blah Gun name Blah Blah Gun type
Blah Blah power Blah blah BB wight Blah blah range
Blah Blah Blah gunspecs
Blah Blah more gunspecs
Blah Blah Blah part name
gunspecs gunspecs gunspecs
gunspecs Blah Blah gunspecs
manufacturer name Blah Blah gunspecs
  Reply With Quote
Old 05-18-2013, 08:30 AM   #15
Scheck   Scheck is offline
Jr. Sniper
 
Join Date: Feb 2013
Location: Midlands UK
Posts: 336
on a 130% spring (Sp130's or m130's) I can achieve 500fps with a ~100% airseal.

My problem though, is using a 130 spring, the fps will decrease from 500fps to 400, due to the spring becoming weaker over time. Would I, therefore, be better off getting a 190spring, and chopping it down to 500fps? Would it maintain it's "elasticity" better?

Also, to those of you that don't know springs too well, the "130" means "130 percent of 1 joule".

For example, if we know 1joule can fire a .2gram bb at 328fps (or 100m/s as there are 3.28feet per meter), then a 130 spring will fire at 130% x 328fps = 426fps.

Of course, this depends greatly on your airseal: so if you are performing WORSE than this, you can improve your fps by improving your airseal.
  Reply With Quote
Reply


Search tags for this page
airsoft sniper m190 spring
,
fps with angel custom 170 spring
,
m170 sniper fps
,

m170 spring

,
m170 spring fps
,
m170a sniper rifle
,
m190 airsoft spring
,

m190 spring

,
m190 spring airsoft
,

m190 spring fps

,
vsr 10 m170 spring
,
vsr 10 m190 spring
Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
M170 in mauser raizan General Sniper Talk 1 12-23-2012 06:43 AM
Stock Bar10 Trigger with m170 Spring? Masterjuggler98 Others 4 05-10-2012 03:41 PM
g&p m170 motor won't turn over?? goldentrigun Longrange AEGs 9 04-05-2012 03:06 PM
V2 Gearbox King Arms M190 recoil Rifles & Parts Reviews 2 04-06-2011 02:48 PM
M170 TM VSR-10 rifle troubleshooting. Wandall VSR Rifles 2 02-16-2008 01:51 AM



All times are GMT -5. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.