DIY Rifle Bag Guide - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > General > General Sniper Talk
General Sniper Talk Dedicated to any and all sniper-related discussions

Like Tree2Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 11-14-2012, 07:26 PM   #1
Veteran Sniper
 
Masterjuggler98's Avatar
 
Join Date: Apr 2012
Location: New Jersey
Posts: 2,892
Send a message via Skype™ to Masterjuggler98
DIY Rifle Bag Guide

After working hard on our rifles for so long, and spending so much money on them, it would just kill us to see something happen to them. Despite this, I bet most of us don't even have a case for them, and just leave them on the workbench or under the bed.


I designed and made this case to be as cost effective as possible. If it isn't cheap to make, why not just buy a case? Most of the materials I already had on hand, and I'm assuming most of you will have them too. If you don't have the things I used on hand, I encourage you to try different materials and designs.


This is a soft case, meant to be carried around. It isn't designed to be a display case or a big stationary hard case.


Keep in mind, this is NOT a sewing lesson. This is strictly to teach you how to make all the parts and a general briefing of the put-together process. I'm not going to be showing you how I sewed everything together. For that you will need to find another tutorial online about how to sew zippers and the like.




Materials:


1) A strong fabric for the shell (I used duck cloth found at a craft store, You can use duffel bags, nylon fabric, etc.)


2) A liner to keep the rifle and scope from getting scratched for what ever reason (I used the fleece fabric from a snuggie I got a while back. Those things are next to useless. You can use old blankets, etc.)


3) Padding to protect your rifle rifle from being dropped or hit (I used a sheet of 1/4 foam I got from a crafts store. If you used an old blanket as your liner that should be fine.)


4) A zipper (I used one from an old book bag. You can buy one or take one off something you are going to throw away.)


5) A handle (I used the handle from the book bag mentioned above.)


6) Thread (Use double duty or heavy duty thread)





Tools:


1) Sewing machine with a heavy duty needle and a zipper foot or a hand needle (The sewing machine will save you a lot of time, but you will probably curse as much as using the hand needle.)


2) Cutter (I use a rotary blade with a cutting mat. You can use scissors but they are much less precise.)



Process:


Once you have all your materials, the first thing to do is figure out how big you want your bag to be. If it is too big your rifle will bounce around inside, but if it is too small it won't fit. For my bar10, I cut the duck cloth 47x23. Remember you will be taking off an inch or two on every side because you sew the edges together then turn the whole thing right side out. Figure out how big you need it to be then add two inches. Cut the lining to the same size as the shell (duck cloth).


If you use a foam sheet or some other thick padding, cut it two inches shorter than you cut the shell. If it is thick like my 1/4 foam sheet, you will want to keep it suspended between the lining and the shell. If you tried to sew the foam down it would be very hard to do, especially on a sewing machine.


Once you have the shell cut to size, sew your handle on. I sewed it to the center, not realizing the center of balance on the rifle is way off center. To counteract this I added a pocket to the side opposite the zipper. If I put my stock heavy bar10 in barrel first, it will tilt backward, so if I add a bag of bbs, my mag, and a speed loader to the pocket in the front, it will balance it out. If you have a barrel heavy rifle, add the pocket to the side of the bag the stock will be facing.




You don't need to add a pocket, but it's a good idea and will make your bag look better. I modeled mine after the pocket on my cargo jeans. It is made out of some extra duck cloth I had after cutting the shell. It holds a full bag of 4000 bbs, my bar10 mag, and my speed loader. If I could go back I would have made it larger, or at least made a second one. I would have also added the shoulder straps from the back pack. Once you sew the bag together there is no going back to add more pockets. You need to sew everything to the shell so once the liner is in there, you're out of luck.



After you have everything attached to the shell, you can sew the zipper on. The zipper from the book bag isn't that long, so I couldn't make it go all the way around to open it and use it like a mat. My method is to just slide the rifle in.



Remember to keep the bag inside out from now on. You will be turning it back right side out after it is all finished.


Once you have everything sewn together and turned inside out, give everything a check to make sure it is all secure. You don't want it ripping on you as you are carrying your rifle somewhere important, and have it fall out and break. Yank the handle, tug on the seams, pull on the pockets, and generally give it a bit of a beating. If something fails, re-sew, reinforce it and try again. If it's all holding up, then put your rifle in and you're set to take it to the next game!




Tell me if something needs more detail, if I should add anything, or if I was a bit too vague about how to sew it together. I'm trying not to make it a sewing lesson, but if there is something not in any other sewing tutorials you can find, I'll add it. There is obviously a lot that can be improved upon with my design, so if you modify or add something, tell me how you did it, and I can add it to my guide.
Seefu and sicariatus like this.

Last edited by Masterjuggler98; 01-06-2016 at 06:59 PM.
  Reply With Quote
Members that say thanks to Masterjuggler98 for this post: Bushmaster Recon, Gazzie, I don't know?, MiloXC3
Remove Ads
Old 11-14-2012, 07:44 PM   #2
MGunner   MGunner is offline
Experienced Sniper
 
MGunner's Avatar
 
Join Date: Feb 2011
Posts: 1,033
Thats' freaking awesome. Looks very clean.

STICKY!
__________________
Maineah'
Tanaka M700 AICS
KWA USP
  Reply With Quote
Members that say thanks to MGunner for this post: Masterjuggler98
Old 11-14-2012, 08:58 PM   #3
Young Gun
 
Join Date: Oct 2012
Posts: 29
Do you do hems as well? I got a pair of pants that are a little long... haha. That is awesome, looks legit. Great work on this!! Def Sticky this!!
  Reply With Quote
Members that say thanks to rockinrod for this post: Masterjuggler98, sanguinor
Sponsored Links
Advertisement
 
Old 11-14-2012, 09:01 PM   #4
Veteran Sniper
 
Masterjuggler98's Avatar
 
Join Date: Apr 2012
Location: New Jersey
Posts: 2,892
Send a message via Skype™ to Masterjuggler98
Quote:
Originally Posted by rockinrod View Post
Do you do hems as well? I got a pair of pants that are a little long... haha. That is awesome, looks legit. Great work on this!! Def Sticky this!!
Thanks. You wouldn't believe how many times I get asked about the hems as a joke whenever people realize I made the bag myself. I could spray paint it black, or possibly camo to make it look better.
  Reply With Quote
Old 11-14-2012, 09:05 PM   #5
Young Gun
 
Join Date: Oct 2012
Posts: 29
Maybe some Molle on it, either inside or out, to help keep things organized with gear you already have? Since we dont really have much for a chest rig, at least i dont use one, could be a good way to make use of some extra mag cases and what not. And i wouldn't spray paint it but would rather get dif colored material, spray paint does reduce the strength of some materials. It sort of eats away at it while the paint is still wet.
  Reply With Quote
Old 11-14-2012, 09:21 PM   #6
Young Gun
 
Sonnypie's Avatar
 
Join Date: Nov 2012
Location: California
Posts: 84
Wink Grandpa's Dual Case

I'm always looking for more to my solutions.
So I had a couple of yards of Camo fabric. I wanted to make my own Shemagh sorta scarf. To wrap up under my Ghillie hat.
Well, my material is Camo one side, and just white on the other. (Standard BDU fabric) So I needed to double it over. And along the way, it morphed into a dual purpose....
It is a neck/lower face wrap, but it also doubles as a rifle bag as well.
I use goggles and this serves as face/neck protection. And it forms to my stock.

Luks lik dis:





__________________
Grandpa in a Ghillie
I hide in the grass and shoot your a$$.

Last edited by Wolfgeorge; 12-22-2012 at 07:03 PM.
  Reply With Quote
Old 11-14-2012, 09:27 PM   #7
Young Gun
 
Sonnypie's Avatar
 
Join Date: Nov 2012
Location: California
Posts: 84
And no, I don't do hems either.
But I did repair the Grand Daughters Dubey, or whatever they call that sack for a comforter.
Mostly I bought my sewing machine for heavy fabrics. I make stuff like tool rolls and bags now and then.
My wife sez I am the only man she ever knew that has his own sewing machine.
__________________
Grandpa in a Ghillie
I hide in the grass and shoot your a$$.
  Reply With Quote
Old 11-14-2012, 09:28 PM   #8
Veteran Sniper
 
Masterjuggler98's Avatar
 
Join Date: Apr 2012
Location: New Jersey
Posts: 2,892
Send a message via Skype™ to Masterjuggler98
@Rock- I wouldn't bring this case into the field with me. Maybe if I could unfold it into a pd, but with it's current design it wouldn't be too stealthy. You could turn it into a drag bag. Like I said, I encourage people to modify this design.

Last edited by Masterjuggler98; 11-14-2012 at 09:34 PM.
  Reply With Quote
Old 11-14-2012, 09:28 PM   #9
Advanced Sniper
 
goldentrigun's Avatar
 
Join Date: Oct 2011
Location: Eastern shore MD
Posts: 890
I've also seen people cut BDU pant legs* and sew one end shut while the other has a zipper for use as a gun sock. It isn't very padded but the gun is away and would be protected from basic scratches and prying eyes.

Last edited by goldentrigun; 11-14-2012 at 09:35 PM.
  Reply With Quote
Old 11-14-2012, 09:33 PM   #10
Young Gun
 
Sonnypie's Avatar
 
Join Date: Nov 2012
Location: California
Posts: 84
I might not either. But it began as a neck and lower face wrap. The gun bag was an after-thought.
Mine is not as nice as yours, but we think alike about being nice to our guns.
__________________
Grandpa in a Ghillie
I hide in the grass and shoot your a$$.
  Reply With Quote
Old 11-14-2012, 09:34 PM   #11
Veteran Sniper
 
Masterjuggler98's Avatar
 
Join Date: Apr 2012
Location: New Jersey
Posts: 2,892
Send a message via Skype™ to Masterjuggler98
A sewing machine is just another machine to me. Whether it spins a giant 12" metal wheel that cuts through granite or pushes a needle through a piece of fabric, it's just a machine. I love it when people think I'm lying when they find out I have a sewing machine.
  Reply With Quote
Old 11-14-2012, 09:47 PM   #12
Young Gun
 
Sonnypie's Avatar
 
Join Date: Nov 2012
Location: California
Posts: 84
Until they find out what you can do with it....
LOL! We get the last laugh.

I'm more apt to wear this instead of the gun bag:



I call it a Camo Kerchief. Velcro in back, and a band over the head.
__________________
Grandpa in a Ghillie
I hide in the grass and shoot your a$$.

Last edited by Sonnypie; 11-14-2012 at 09:51 PM. Reason: Add a picture...
  Reply With Quote
Old 11-14-2012, 09:56 PM   #13
Young Gun
 
Sonnypie's Avatar
 
Join Date: Nov 2012
Location: California
Posts: 84
PS:
If you wanted, you could "harden" your case, or the next one anyway, with some plastic panels inside.
__________________
Grandpa in a Ghillie
I hide in the grass and shoot your a$$.
  Reply With Quote
Old 11-14-2012, 10:34 PM   #14
exomatt   exomatt is offline
Jr. Sniper
 
exomatt's Avatar
 
Join Date: Nov 2011
Posts: 318
Great work juggler! It looks really clean and quite nice. The molle thing is a good idea for others to try as well. Sonnypie, that looks pretty awesome as well! I like the camouflage fabric.

I want someone to make a full drag-bag made to use out in the field and be ghillied, and post pics up here!
__________________
Callsign: Bushman

https://www.airsoftsniperforum.com/image.php?type=sigpic&userid=1616&dateline=1347870  753
  Reply With Quote
Old 11-15-2012, 01:49 AM   #15
 
Wolfgeorge's Avatar
 
Join Date: May 2011
Location: Greece
Posts: 6,066
Thank you ... This guide is pretty informative and this bag is fairly easy to do!


Wolf
  Reply With Quote
Reply


Search tags for this page

diy gun bag

,

diy rifle bag

,
diy rifle bag patterns
,

diy rifle case

,
diy sewing gun bag
,
drag bag rifle case pattern sewing
,
gun case pattern
,

gun case sewing pattern

,
how to sew a rifle case pattern you tube
,

plans for diy sniper drag bag

,
rifle bag pattern
,
soft gun case pattern
Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rifle painting guide 2echo Concealment 67 07-24-2018 03:36 AM
VSR-10 Upgrade Guide bud288 VSR Rifles 7 04-10-2017 04:00 PM
Rifle Camoing Guide 2echo Concealment 24 01-04-2016 12:03 PM
TM L96 guide Alpha-57 Others 4 11-05-2012 08:26 AM
Paint Guide? dundaien Concealment 1 06-08-2010 09:53 AM



All times are GMT -5. The time now is 12:30 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.