100 kills without dying!!!!!! - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > General > General Sniper Talk
General Sniper Talk Dedicated to any and all sniper-related discussions

Like Tree30Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 04-20-2019, 01:43 AM   #1
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,821
100 kills without dying!!!!!!

Today was my best kill streak ever. It was like playing a video game. 40 minutes playing a really easy game. Lol
We had 10 people against 20 and we were defending 5 small 1 room buildings. The enemy had to overrun our buildings to win.
At the start of the game, with my long range DMR, I climbed up a tree that was behind the buildings. I was about 7 meters off of the ground and since I had the height, I was able to engage the enemy anywhere from 90 meters or closer. From this height I noticed that the enemy only had one DMR and no snipers. So all I had to do from my vantage point was to watch for the one DMR or anyone who snuck up through some bush.
Anyway, I had kill after kill, after kill. I would have shot at least one person every 20 to 30 seconds. That is a lot. Sometimes they would all charge and I would kill 4 or 5 within only a few seconds. It was absolute fun. At the end, I was finally overrun when my wiring burnt out with too many trigger pulls (This is a high stress build. Not your normal DMR).
I wish I had my camera on my rifle to make a clip to go on the net. It would have been epic. The most kills in one video clip.
Anyway, I don't know how many kills I got but it would have been anywhere between 80-120 kills. I just wish I had my cameras working at the time so I could have made a YouTube clip and counted them all. It was fun times.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Remove Ads
Old 04-20-2019, 01:55 AM   #2
Konsta   Konsta is offline
Jr. Sniper
 
Konsta's Avatar
 
Join Date: Jul 2017
Location: Finland
Posts: 232
Novritsch: 40 kills in one game
1tonne: Hold my beer
__________________
JG BAR-10

Action Army Teflon Cylinder kit
Action Army S-Trigger
Action Army Spring Guide
Action Army VSR Piston 90 Degree
Action Army M150 VSR
Action Army VSR Hop Up Chamber
Action Army 430mm 6.01 Lapped to 10 micron
Airsoftpro Steel Bolt Handle For VSR
Harris Bipod Replicas and 1-5x24mm Shortdot with illuminated reticle and tower adjustment
Maple Leaf 75 degree decepticons bucking
Maple leaf omega nub (aka concave nub)
VSR Stockpouch
  Reply With Quote
Members that say thanks to Konsta for this post: Airborne101
Old 04-20-2019, 05:24 PM   #3
SHEED   SHEED is offline
Young Gun
 
Join Date: Apr 2019
Location: New Zealand
Posts: 18
Made an account just so I can verify 1tonnes story. I was there and saw it happen.

Bit ridiculous and hard to believe. But it happened - the melted gun is the proof.
1tonne likes this.
  Reply With Quote
Sponsored Links
Advertisement
 
Old 04-20-2019, 08:52 PM   #4
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,821
Thanks Sheed.
Sheed and I have played together for 10 years (We even started a very popular airsoft club together).
We are always trying to outdo each other.
SHEED likes this.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 04-20-2019, 10:36 PM   #5
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,821
I just pulled the rifle apart. I burnt out the Jing Gong Blue Top (Extra high torque) motor. I have had this motor for years, and years.
Anyone got a good link on making a Frankentorque motor?
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 04-22-2019, 09:33 AM   #6
Experienced Sniper
 
Zero Roaster's Avatar
 
Join Date: Mar 2017
Location: Canada
Posts: 1,566
Congrats, 1 tonne! An epic day! Technically you can even say they didn't outfox you...you died from a technical glitch. Absolutely beautiful!!
1tonne likes this.
__________________
...and nary a whisper was heard..
  Reply With Quote
Old 04-22-2019, 10:19 AM   #7
wyz2285   wyz2285 is offline
Jr. Sniper
 
wyz2285's Avatar
 
Join Date: Nov 2018
Location: Portugal
Posts: 231
https://youtu.be/8oUl6CFbMjM

You probably already knew most of the stuff he said but this particular guide did help me improbe my motor by shimming the magnets and shaft.
1tonne and terryna like this.
  Reply With Quote
Old 04-22-2019, 11:57 AM   #8
Advanced Sniper
 
MagicMarker's Avatar
 
Join Date: Apr 2016
Location: Washington
Posts: 561
This is awesome! Such an epic cinematic thought- taking so many players out that your gun breaks :P
Though...I'm almost thankful I don't experience this scope of airsoft- I mean good BBs are so expensive! ......but I guess it's worth it eh

Perfect time for a brag thread too- I just hit a 75 meter (LRF) elbow shot!
Minutes before, I was adjusting hop and sighting in when I discerned I could consistently peg a [smaller-than-]torso-sized target at 75m ('flat' trajectory, bit of holdover)- which was the first real rudimentary accuracy test I've done with this build + BBs I trust (BLS .48g), and I was really happy with that. I'd also gotten a great curved 67m shot in an earlier game as well. But then in the next game, I saw a sniper aiming at me, and we had a little 1v1; bless his heart, he did not have the range to hit me [nor the scope to realize it?]...so I suppose it was just me shooting at him But after a few shots aimed at just a face, or couple inches of back, I landed one on the bit of elbow he accidentally left sticking out from behind his tree- feels incredible. I mean that target was head-sized at most :D
1tonne and Zero Roaster like this.
__________________

Last edited by MagicMarker; 04-24-2019 at 05:18 PM.
  Reply With Quote
Old 04-23-2019, 03:48 PM   #9
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,821
Quote:
Originally Posted by MagicMarker View Post
I mean good BBs are so expensive!

If you can get your DMR or Sniper rifle to be extra accurate with those expensive bb's, it actually works out cheaper than using other bb's. The reason being is that with the good quality heavy bb's you are more likely to hit your target first time while with the other bb's you may have to spam a little. So when spamming, you use more bb's and the cost goes up.
Zero Roaster and dulourencini like this.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 04-23-2019, 03:57 PM   #10
Experienced Sniper
 
Zero Roaster's Avatar
 
Join Date: Mar 2017
Location: Canada
Posts: 1,566
Quote:
Originally Posted by 1tonne View Post
If you can get your DMR or Sniper rifle to be extra accurate with those expensive bb's, it actually works out cheaper than using other bb's. The reason being is that with the good quality heavy bb's you are more likely to hit your target first time while with the other bb's you may have to spam a little. So when spamming, you use more bb's and the cost goes up.
To spam, or NOT to spam...!! See? That's my problem...I am uncapable of expecting less than on point performance. If I do, I might was well give up and crush the gun with a tractor. We didn't put all this work in it to be mediocre, right? Soooo...herein lies the rub. I love my LMG, it works awesome, shoots great! It has expensive tastes!! hahahaha...I love running it, I love the accuracy, the range, the leaves blowing off the branches...but the MONEY!!! hahahaha
MagicMarker likes this.
__________________
...and nary a whisper was heard..
  Reply With Quote
Old 04-23-2019, 04:01 PM   #11
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,821
I would never buy an LMG for a number or reasons.
-You can go through a lot of bb's.
-The size and weight of it.
-Other guns can do the same thing and half the size.


But yes, wasting bb's does not seem my cup of tea
Zero Roaster likes this.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 04-23-2019, 05:30 PM   #12
Experienced Sniper
 
Zero Roaster's Avatar
 
Join Date: Mar 2017
Location: Canada
Posts: 1,566
Quote:
Originally Posted by 1tonne View Post
I would never buy an LMG for a number or reasons.
-You can go through a lot of bb's.
-The size and weight of it.
-Other guns can do the same thing and half the size.


But yes, wasting bb's does not seem my cup of tea
Y'know, I thought the same thing. Until I built the BAR. I have to admit, that the attraction of the BAR at first was to build a platform that you just don't get to fool with everyday. Yeah, it's big and heavy, and rattles like a set of tank tracks, but wowee...what a gun. I will also admit that I rebuilt it no less than three times. Each time getting a little more out of it. Now? It's pretty much somewhere between a DMR and well tuned sniper for range. Let's go with a full auto sniper as a description. hehehehe Otherwise, yeah..there would be no point to running one.
1tonne likes this.
__________________
...and nary a whisper was heard..
  Reply With Quote
Old 04-24-2019, 10:32 AM   #13
Advanced Sniper
 
Join Date: Oct 2013
Location: Philadelphia, PA
Posts: 518
None of the fields I played at allowed trees to be climbed :'(
__________________
If you have questions about the King Arms SVD AEG (Or general questions about all SVDs) feel free to PM me and ask. I also have a thread about it:
https://www.airsoftsniperforum.com/43...gunov-aeg.html
Please make sure you read the whole thread - there are corrections throughout it!

Primaries:
King Arms SVD AEG (Polymer)
King Arms VSS Vintorez
Well L96
Secondary:
KWA TT-33
  Reply With Quote
Old 04-24-2019, 04:40 PM   #14
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,821
The tree was a big help. It gave me height which in turn gave me extra range and a better view of what was happening. It also meant that a lot of people where not looking at my height and so they did not know I was there. Although, I was in a good spot that some of the enemy did not know, I still yelled out to our guys if the enemy got within our perimeter. This meant that our guys knew where to concentrate their fire to.


Most of the time I tend to play the sniper/DMR role a little different than most. Since I am back further than our assault players, it means I have a better view point from my position of what is happening on the field and I can let them know what needs to be done on the field. If you played at our fields, you would hear my voice yelling commands quite regularly. (Obviously I do the sneaky sniper thing every now and then)
Zero Roaster likes this.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 04-24-2019, 06:07 PM   #15
Advanced Sniper
 
MagicMarker's Avatar
 
Join Date: Apr 2016
Location: Washington
Posts: 561
Quote:
Originally Posted by 1tonne View Post
If you can get your DMR or Sniper rifle to be extra accurate with those expensive bb's, it actually works out cheaper than using other bb's. The reason being is that with the good quality heavy bb's you are more likely to hit your target first time while with the other bb's you may have to spam a little. So when spamming, you use more bb's and the cost goes up.
Well sure, but I meant the sheer quantity of enemy bodies to shoot at being expensive :P
I've replaced every part on my rifle, even having custom made parts- but I still only own one magazine! Lol- I just don't shoot very much! Hell, I got by with one short magazine in my Tanaka for the longest time before deciding to HPA tap it
I have started to shoot more though- I'm even considering buying a second 50 round magazine :O The main reason seems to be the fields I've been frequenting as of late have more people in a smaller field.
1tonne and Zero Roaster like this.
__________________

Last edited by MagicMarker; 04-25-2019 at 09:54 AM.
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Man Down, Slow Motion Airsoft Kills! dracula Sniper Cam 1 09-02-2017 08:18 AM
Sniper kills in one game - from Taiwan Coolstan Sniper Cam 2 09-19-2016 09:29 AM



All times are GMT -5. The time now is 12:38 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.