What sniper rifle should i get? - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > General > General Sniper Talk
General Sniper Talk Dedicated to any and all sniper-related discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 09-07-2019, 07:34 AM   #1
Young Gun
 
Join Date: Sep 2019
Posts: 5
What sniper rifle should i get?

Im looking for a new sniper rifle because my WELL MB-01 is very worn out with no upgrades and is not accurate. Im thinking of an TM vsr-10 G-SPEC but is it even good with a budged of 200 to upgrade it? I was thinking about the SSG24 but the price was too high with 475... So what sniper should I get?
  Reply With Quote
Remove Ads
Old 09-07-2019, 04:39 PM   #2
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,321
Get a Jing Gong Bar10. They are better than the TM VSR10.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 09-08-2019, 10:56 AM   #3
Jr. Sniper
 
Join Date: Dec 2017
Posts: 160
Well MB01 parts shouldn't be too hard to get. Action Army makes a lot of them as well as PDI.

As for the VSR route.....I really wouldn't suggest the BAR-10. Right now with the advent of the AACT11 it simply is a no-brainer to get the T11 instead of any other things else.
__________________
My loadout:

-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Sponsored Links
Advertisement
 
Old 09-08-2019, 02:18 PM   #4
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,321
The only thing about the T11 that I am skeptical of is how strong the stock is where the rear part of the stock can be removed to make a short rifle. Will it break?
Also, what is the price difference between the T11 and the Bar10.
One big advantage the VSR has is it is extra light.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 09-08-2019, 07:43 PM   #5
Young Gun
 
Join Date: Aug 2019
Posts: 74
Quote:
Originally Posted by kotticarry View Post
Im looking for a new sniper rifle because my WELL MB-01 is very worn out with no upgrades and is not accurate. Im thinking of an TM vsr-10 G-SPEC but is it even good with a budged of 200€ to upgrade it? I was thinking about the SSG24 but the price was too high with 475€... So what sniper should I get?
Have you looked into getting the ASG M40A3 Sportline? It looks like you can get an AA VSR hopup chamber for it with slight mods. You should easily be able to max it out for under $200, and it's OOB performance looks great too. I'm in the same boat, as I would like to put my G&P M14 aside and focus on a budget BASR. This is the route I'm gonna try to go.
  Reply With Quote
Old 09-09-2019, 06:46 AM   #6
Jr. Sniper
 
Join Date: Dec 2017
Posts: 160
Quote:
Originally Posted by 1tonne View Post
The only thing about the T11 that I am skeptical of is how strong the stock is where the rear part of the stock can be removed to make a short rifle. Will it break?
Also, what is the price difference between the T11 and the Bar10.
One big advantage the VSR has is it is extra light.
Weren't the T11 and the T11s two different rifles with different stocks? Afaik they should be two separate rifles instead of a convertible version.

And that, you will never get a price difference advantage large enough to offset the upgrades' individual price. For a price tag of 155 USD you have internals that could stand up to stupid strong springs rather easily and is immediately usable out of the box, which is something you need to upgrade the BAR to be capable of doing so. For it being VSR compatible 100% the VSR advantage is no longer a valid excuse either. And as far as weight goes the gun is 2.1kg which is also only that weeny bit heavier than the BAR10 with quality beating the BAR everyday.

I would go so far to say the T11 is the go-to choice for any VSR novices instead of the BAR. The current situation, as it stands, is it being a VSR-based platform that is already well-suited to high power play out of the box, and is perfectly upgrade-capable even if you get dissatisfied with its current performance. The only instance where you would want to go for the BAR right now is you know exactly what you want to buy and do, instead of starting out and just needed something cheap and does you work, and even then the T11 is still the better choice.
__________________
My loadout:

-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40

-Sub: Tokyo Marui 5.1 Hi-Capa

Last edited by TenshouYoku; 09-09-2019 at 08:25 AM.
  Reply With Quote
Old 09-09-2019, 02:53 PM   #7
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,321
Maybe the T11 stocks are 2 different stocks. So just short and long. I have not checked properly.


As for the internals. The T10 and T11 do not have the best Action Army parts. They did not use there Specialized 90 degree trigger. They used another trigger that is not as strong but it is still good. Just not as strong as the Specialized trigger. If I was to make a rifle that has an M190 spring, I would not be using the T10,T11 trigger. Also the piston needs replacing as well as it is just a plastic one that cannot handle an M170. They also have a different cylinder than there Teflon cylinder but it does seem to be quite good. They have also used another hopup chamber that is just a cast metal chamber not like their CNCed red one for the VSR10. In saying this, it does seem to work well.
So the T10/T11's are a good option for someone who is starting out but if the person is aiming for the best performance out of the rifle, then they will need to upgrade parts.
As for the weight, I just went onto the AA website and the T11 is lighter than the T10 by a reasonable amount which is good. Back when before they made the T10, they asked me for advise on making the rifle, I asked them to make it as light as possible. When they made the T10 stock, I was a little disappointed because of the weight. So the T11 may be the new good base rifle.
I will get the T11 some time and check the stock/weight out.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 09-09-2019, 03:44 PM   #8
 
Plazmaburn's Avatar
 
Join Date: Feb 2013
Location: San Antonio, TX
Posts: 3,285
Send a message via Skype™ to Plazmaburn
As long as we can get the T11 in the States easily. While people will say you can import the T10 no problem, mine was seized and destroyed by those assholes in customs.
__________________
Don't underestimate me. I know more than I say, think more than I speak, and notice more than you realize.
  Reply With Quote
Old 09-09-2019, 03:58 PM   #9
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,321
The T10 had copyright issues. That's why they made the T11
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Old 09-09-2019, 08:22 PM   #10
cetane   cetane is offline
Jr. Sniper
 
cetane's Avatar
 
Join Date: May 2013
Location: Markham & Stouffville, Ontario, Canada
Posts: 426
Quote:
mine was seized and destroyed by those assholes in customs.
I understand your pain :-/ my we g35 went that way with canadian customs (cbsa)
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 11:58 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.