Airsoft Sniper Forum banner

Accuracy

1K views 7 replies 5 participants last post by  MagicMarker 
#1 ·
So i got a vsr sniper built with action army cylinder and trigger system with a action army hop up, maple leaf autobot bucking thats correct to my weight of bbs and a maple leaf crazy jet barrel.

Now to the point: when i shoot maybe 1 or 2 bbs will fly in a straight line to hit their target and a few will veer when the wind picks up, but no matter how many adjustmemts i make i still get alot that trail off to the left or right or high alot with .40 bbs.

Can it be because i have no spacers? Or what else please help
 
#2 ·
What range is it veering off at and what size is the target?
Also energy rate.
Barrel spacers do help a lot.
 
#5 ·
The barrel spacer could definitely help, depending on the amount of deviaiton. If you're shooting at a tree 150 feet away with 500 FPS, is that 500fps with 0.4s? If that's the case you should definitely be able to push out to 200 at least, maybe even 225 accurately. If they're flying several feet off then I think that's something up with the hop up. I'd check out what the hop up looks like when it's applied, remove the barrel/hop-up assembly and see what shape it's making when you look through the barrel. Check out https://www.airsoftsniperforum.com/32-general-sniper-talk/12514-rubber-lever.html - it's a pretty useful graphic to show you what your hop up should look like. If it seems that the bucking is applying more pressure at the center rather than at 10 and 2 o'clock, that could be a big indicator of why you're getting inconsistency.

I'm curious though, you mean to say you're shooting 500fps with 0.4's?
 
#7 ·
Interesting - did you get a chance to check out the hop up? Everything looking alright in there?




Coming from the AS01, I know the lack of barrel spacers can really screw with shots as well with the amount of vibration if you're rocking a pretty hard kicking spring
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top