Just a quick question, spring guide with bearing - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > General > General Sniper Talk
General Sniper Talk Dedicated to any and all sniper-related discussions

Like Tree2Likes
  • 2 Post By TenshouYoku
Reply
 
LinkBack Thread Tools Display Modes
Old 01-03-2020, 07:55 AM   #1
Kuutio   Kuutio is offline
Young Gun
 
Join Date: Sep 2018
Posts: 47
Just a quick question, spring guide with bearing

Just looking for quick answer, how important the bearing would be for me, need to max fps for my mb44xx until i make it hpa later on and i think biggest spring in can smash in is m170 and our limit is 4J. So how much would the bearing affect here, less fps/ms variation yes but i still need to make the barrel right length and make the hop 100%air tight etc. Currently its hard to find spring guide with bearing and airsoftpro sells one only in the zero upgrade kit but i already have 90 trigger and new piston.

Edit: also if someone would be nice guy, what handles/rear ends i can fit ? like for example does vsr handle/rear fit etc, safety doesnt need to be functional since its springer even though i kinda feel dumb saying that. Or should i just make rear with 3d printer rather than look what i can fit ?

Last edited by Kuutio; 01-03-2020 at 07:59 AM.
  Reply With Quote
Remove Ads
Old 01-03-2020, 08:33 AM   #2
Jr. Sniper
 
Join Date: Dec 2017
Posts: 425
In theory, spring guide with bearings help reducing bolt pull resistance by allowing the spring rotate more freely when compressed (instead of scratching against the spring guide), but more moving parts means more stuff to get loose and break as I learnt this in the hard way.

Though really any steel spring guides will work, in actuality it doesn't really matter much.
kazuchan and terryna like this.
__________________
My loadout:

-Main: Ares Amoeba AS02
- Inner Barrel: Maple Leaf Crazy Jet 310mm 6.04 barrel
- Hop-up bucking: Maple Leaf MR. HOP 60 Degrees
- Spring: Custom
- Cylinder: Edgi Nemo cylinder kit
- Chamber: Action Army blue chamber
- Spring Guide: Edgi Nemo cylinder kit
- Piston: Edgi Nemo cylinder kit
- Scope: Discovery 3-12*42

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Old 01-03-2020, 09:20 AM   #3
Advanced Sniper
 
Join Date: Nov 2018
Posts: 949
The bearing guide will make ZERO difference to bolt pull, fps, or consistency.

Any well made spring guide will work, and so long as you use a quality spring (I like RAPAX) and keep the system air tight it will be consistent.
  Reply With Quote
Sponsored Links
Advertisement
 
Old 01-03-2020, 12:43 PM   #4
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
Rapax is good. I have heard that they are weird sometimes, but it is good. Any generic parts will do really.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 01-04-2020, 05:43 AM   #5
Kuutio   Kuutio is offline
Young Gun
 
Join Date: Sep 2018
Posts: 47
Okkey, thanks for the answers :) ill skip the bearing and just get new spring and later on hpa it. I guess you dont have idea on about what bolt handle/rears fit mb44xx ?
  Reply With Quote
Old 01-05-2020, 10:54 AM   #6
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
Why?

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 01-05-2020, 08:30 PM   #7
Kuutio   Kuutio is offline
Young Gun
 
Join Date: Sep 2018
Posts: 47
Just a litle want to change that litle piece :)




Quote:
Originally Posted by BlackDogAirsoft View Post
Why?

Sent from my SM-A505FN using Tapatalk
  Reply With Quote
Old 01-06-2020, 08:11 AM   #8
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
I mean, action army probably makes some, mag, angel custom, pdi or laylax.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 01-06-2020, 08:17 AM   #9
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
Here is one from angel custom, but it only fits the well mb01 series. Sorry.
https://www.evike.com/products/41435/

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 01-06-2020, 11:28 AM   #10
terryna   terryna is offline
Young Gun
 
Join Date: Mar 2018
Posts: 22
Quote:
Originally Posted by TenshouYoku View Post
In theory, spring guide with bearings help reducing bolt pull resistance by allowing the spring rotate more freely when compressed (instead of scratching against the spring guide), but more moving parts means more stuff to get loose and break as I learnt this in the hard way.

Though really any steel spring guides will work, in actuality it doesn't really matter much.
Nice
  Reply With Quote
Old 01-06-2020, 07:53 PM   #11
Kuutio   Kuutio is offline
Young Gun
 
Join Date: Sep 2018
Posts: 47
Thanks anyways :) will see what i come up with. Might be that i just make some 3d print that works since it doesnt need to do anything else than keept that spring loaded bearing in place and hold the handle if im correct. Might have missed something but currently tired when writing :D

Edit: also i meant the rear end behind the handle that has the safety function in aws/awp platforms but thats my mistake :)



Quote:
Originally Posted by BlackDogAirsoft View Post
Here is one from angel custom, but it only fits the well mb01 series. Sorry.
https://www.evike.com/products/41435/

Sent from my SM-A505FN using Tapatalk
  Reply With Quote
Old 01-07-2020, 12:48 PM   #12
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
If it is only a replacement you are looking for check out a shop called eagle6.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 03:02 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.