This new rifle looks sweet! Any knowledge? - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > General > General Sniper Talk
General Sniper Talk Dedicated to any and all sniper-related discussions

Like Tree2Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 01-04-2020, 09:38 PM   #1
Jr. Sniper
 
Join Date: Aug 2019
Posts: 165
This new rifle looks sweet! Any knowledge?

So I recently was browsing airsoftgi and came across the "Nemesis Vanquish" BASR. It looks compact, super sweet, and waaaaayyy cheaper than the Ares version at $300 USD. With a little more research, it appears that it is manufactured and/or distributed by Echo 1. So here comes the big question: any information on this rifle? There seems to be little the internet has to offer about it, as it looks relatively new
  Reply With Quote
Remove Ads
Old 01-04-2020, 09:40 PM   #2
Jr. Sniper
 
Join Date: Aug 2019
Posts: 165
Oh, forgot the link!

https://www.evike.com/products/15796/
Attached Images
File Type: jpg Screenshot_20200104-204009_1578192033511.jpg (7.6 KB, 26 views)
  Reply With Quote
Old 01-04-2020, 09:42 PM   #3
Jr. Sniper
 
Join Date: Dec 2017
Posts: 217
The Nemesis Vanquish is produced by Golden Eagle (aka Jing Gong).

Uses VSR barrels and buckings, also uses AEG springs, other things else are proprietary

Air volume way exceeds the VSR with good general durability

Magazine capacity is 100 rounds with a faulty tunnel hatch that cannot hold rounds effectively (but doesn't actually affect use anyway)

It doesn't have much information because, well, it's not VSR so it has to have less information
kazuchan likes this.
__________________
My loadout:

-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Sponsored Links
Advertisement
 
Old 01-04-2020, 10:09 PM   #4
Sodium   Sodium is online now
Jr. Sniper
 
Sodium's Avatar
 
Join Date: Nov 2017
Location: New York
Posts: 170
Quote:
Originally Posted by TenshouYoku View Post
The Nemesis Vanquish is produced by Golden Eagle (aka Jing Gong).

Uses VSR barrels and buckings, also uses AEG springs, other things else are proprietary

Air volume way exceeds the VSR with good general durability

Magazine capacity is 100 rounds with a faulty tunnel hatch that cannot hold rounds effectively (but doesn't actually affect use anyway)

It doesn't have much information because, well, it's not VSR so it has to have less information
Are you sure the cylinder volume is greater? Its a widebore cylinder, but it's short stroked.
__________________
Some people are slinkies, not really good for much but bring a smile to your face when you push them down the stairs
  Reply With Quote
Old 01-04-2020, 10:24 PM   #5
Jr. Sniper
 
Join Date: Dec 2017
Posts: 217
Quote:
Originally Posted by Sodium View Post
Quote:
Originally Posted by TenshouYoku View Post
The Nemesis Vanquish is produced by Golden Eagle (aka Jing Gong).

Uses VSR barrels and buckings, also uses AEG springs, other things else are proprietary

Air volume way exceeds the VSR with good general durability

Magazine capacity is 100 rounds with a faulty tunnel hatch that cannot hold rounds effectively (but doesn't actually affect use anyway)

It doesn't have much information because, well, it's not VSR so it has to have less information
Are you sure the cylinder volume is greater? Its a widebore cylinder, but it's short stroked.
Yes. It's shortstroked, but it's a lot wider than the VSR.
__________________
My loadout:

-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Old 01-04-2020, 10:44 PM   #6
Jr. Sniper
 
Join Date: Aug 2019
Posts: 165
Quote:
Originally Posted by TenshouYoku View Post
Quote:
Originally Posted by Sodium View Post
Quote:
Originally Posted by TenshouYoku View Post
The Nemesis Vanquish is produced by Golden Eagle (aka Jing Gong).

Uses VSR barrels and buckings, also uses AEG springs, other things else are proprietary

Air volume way exceeds the VSR with good general durability

Magazine capacity is 100 rounds with a faulty tunnel hatch that cannot hold rounds effectively (but doesn't actually affect use anyway)

It doesn't have much information because, well, it's not VSR so it has to have less information
Are you sure the cylinder volume is greater? Its a widebore cylinder, but it's short stroked.
Yes. It's shortstroked, but it's a lot wider than the VSR.
Curious about the hopup. Is it a TDC style, or is it adjusted via some lever or other faulty mechanism? Thanks for the help!
  Reply With Quote
Old 01-04-2020, 10:48 PM   #7
Jr. Sniper
 
Join Date: Dec 2017
Posts: 217
Quote:
Originally Posted by FMP Airsoft View Post
Quote:
Originally Posted by TenshouYoku View Post
Quote:
Originally Posted by Sodium View Post
Quote:
Originally Posted by TenshouYoku View Post
The Nemesis Vanquish is produced by Golden Eagle (aka Jing Gong).

Uses VSR barrels and buckings, also uses AEG springs, other things else are proprietary

Air volume way exceeds the VSR with good general durability

Magazine capacity is 100 rounds with a faulty tunnel hatch that cannot hold rounds effectively (but doesn't actually affect use anyway)

It doesn't have much information because, well, it's not VSR so it has to have less information
Are you sure the cylinder volume is greater? Its a widebore cylinder, but it's short stroked.
Yes. It's shortstroked, but it's a lot wider than the VSR.
Curious about the hopup. Is it a TDC style, or is it adjusted via some lever or other faulty mechanism? Thanks for the help!
TDC similar to the Striker family
__________________
My loadout:

-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Old 01-05-2020, 02:09 PM   #8
Jr. Sniper
 
Join Date: Aug 2019
Posts: 165
Do you know what trigger system it uses? 45 degree or 90 degree?
  Reply With Quote
Old 01-05-2020, 03:35 PM   #9
Sodium   Sodium is online now
Jr. Sniper
 
Sodium's Avatar
 
Join Date: Nov 2017
Location: New York
Posts: 170
Its 90 degree
__________________
Some people are slinkies, not really good for much but bring a smile to your face when you push them down the stairs
  Reply With Quote
Old 01-05-2020, 03:50 PM   #10
Jr. Sniper
 
Join Date: Aug 2019
Posts: 165
Quote:
Originally Posted by Sodium View Post
Its 90 degree
Really??? I thought I read somewhere that it's 45, I think on an old post here! If it's 90, that's a beautifully priced rifle and a nice project!
  Reply With Quote
Old 01-05-2020, 06:18 PM   #11
Jr. Sniper
 
Join Date: Dec 2017
Posts: 217
Quote:
Originally Posted by FMP Airsoft View Post
Quote:
Originally Posted by Sodium View Post
Its 90 degree
Really??? I thought I read somewhere that it's 45, I think on an old post here! If it's 90, that's a beautifully priced rifle and a nice project!
Older versions uses 45 degrees
Newer ones are now 90 degrees
kazuchan likes this.
__________________
My loadout:

-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Old 01-06-2020, 12:33 PM   #12
terryna   terryna is offline
Young Gun
 
Join Date: Mar 2018
Posts: 13
Quote:
Originally Posted by Sodium View Post
Its 90 degree
+1
  Reply With Quote
Old 01-06-2020, 04:47 PM   #13
Jr. Sniper
 
Join Date: Aug 2019
Posts: 165
[QUOTE=terryna;413945]
Quote:
Originally Posted by Sodium View Post
Its 90 degree
+1[/QU

Last question: is there any difference between the US one listed as echo 1/jag arms and the Hong Kong one listed as golden eagle?
Evike:
https://www.evike.com/products/15796/
Tiger111hk:
https://www.google.com/amp/s/airsoft...duct_info.html

Thanks so much for the help!
  Reply With Quote
Old Today, 02:25 PM   #14
Young Gun
 
The Wild Rover's Avatar
 
Join Date: Jan 2017
Location: Central CA Coast
Posts: 34
Is there any way to deal with that tunnel hatch? It dumps all the rounds. I saw this and had to have it. I absolutely love the rifle but I want to fix the magazine issue

Last edited by The Wild Rover; Today at 02:30 PM.
  Reply With Quote
Old Today, 03:19 PM   #15
Young Gun
 
Join Date: Oct 2016
Posts: 80
I’m curious about the threading on the barrel nut. Is it compatible with any AR-style rain systems?
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 07:11 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.