Looking at purchasing a VSR 10 pro and wanting to know what upgrades I should get - Page 2 - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > General > General Sniper Talk
General Sniper Talk Dedicated to any and all sniper-related discussions

Like Tree8Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 02-13-2020, 03:11 PM   #16
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,761
Before getting a Reliku 1 piece receiver, I would advise people to just put some tape between the outer barrel and stock.
In fact, I have never seen the need for a 1 piece receiver even without putting tape between the barrel and the stock.
I think that they are not needed and if you did use one, you would not see any difference in accuracy. It will just be something that looks a little different and it is also heavier than the stock setup.
Zero Roaster and AccurateDMD like this.
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Remove Ads
Old 02-13-2020, 04:11 PM   #17
Advanced Sniper
 
Join Date: Nov 2018
Posts: 920
There's also a great stickie in the VSR forum about shimming the outer barrel. Works great.
1tonne likes this.
  Reply With Quote
Old 02-13-2020, 06:47 PM   #18
Jr. Sniper
 
Join Date: Dec 2017
Posts: 357
There is a point until I realised full seal or not doesn't actually really make that much of a difference.

My Snow Wolf M24 with TNT bucking and PDI chamber has around 1m/s max deviance, so is my WELL MB01 with TNT chamber and bucking set. They all don't seal completely (hell they might as well be said to not seal at all) but they don't really cause any difference in trajectory. (Yes I know DMD for some reason my TNT chamber just works wonders, no idea why)

My SRS used both FAST hop with Silverback bucking and Maple Leaf hop with MR hop, MR hop doesn't retain air but the end result is both a much better fps deviation (~1m/s compared to 2.5 at best with FAST) and a much better hop effect.

Same goes with the MR hop in both my VSR and AS02.
__________________
My loadout:

-Main: Ares Amoeba AS02
- Inner Barrel: Maple Leaf Crazy Jet 310mm 6.04 barrel
- Hop-up bucking: Maple Leaf MR. HOP 60 Degrees
- Spring: Custom
- Cylinder: Edgi Nemo cylinder kit
- Chamber: Action Army blue chamber
- Spring Guide: Edgi Nemo cylinder kit
- Piston: Edgi Nemo cylinder kit
- Scope: Discovery 3-12*42

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Sponsored Links
Advertisement
 
Old 02-13-2020, 09:08 PM   #19
Advanced Sniper
 
Join Date: Nov 2018
Posts: 920
I think it's my nozzle honestly. I've tried it on multiple buckings. The only one it semi fits is the TNT and even then it's too loose. Gonna look at getting a new L96 cylinder head (so if anyone has any suggestions hahaha).

Anyway, OP if you wanna build it your list looks fine, otherwise.. Novy.
  Reply With Quote
Old 03-30-2020, 07:14 PM   #20
Jr. Sniper
 
Korea Has Nukes's Avatar
 
Join Date: Sep 2013
Location: Oregon
Posts: 102
Springer Custom trigger is so much better than aa
  Reply With Quote
Old 04-02-2020, 05:21 PM   #21
Crius   Crius is offline
Young Gun
 
Crius's Avatar
 
Join Date: Feb 2019
Posts: 19
Quote:
Originally Posted by InvictaB View Post
panthera concave nub
Maple leaf mr hop bucking
Laylax spring sp170
You also need Pantera Hop Up arm for this nub.

ML Mr-Hop is better (bb trajectory) than:
ML Monster
TNT TR-Hop

LaylaxSSP10 SP170 is a hard spring. Not practical when you will need fast & repeatedly cocking. You will get tired in long time games. Best choices are SP150 & SP130 (I donít know your fields limit)...
  Reply With Quote
Old 04-02-2020, 06:14 PM   #22
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,761
Quote:
Originally Posted by Crius View Post
LaylaxSSP10 SP170 is a hard spring.
Depends on how strong you are. I find them light. I normally use SP190 springs and they are reasonably easy too
__________________
Live in New Zealand and want Action Army Parts? Check out this thread:
https://www.airsoftsniperforum.com/sh...807#post160807

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/showthread.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/showthread.php?t=6465
Choosing the right spring and making it work
https://www.airsoftsniperforum.com/32...tml#post127126
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 12:26 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.