TnT S+ barrel. - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Player > Rifles & Parts Reviews
Rifles & Parts Reviews Japan, Taiwan, Chinese, USA made replica rifle reviews

Reply
 
LinkBack Thread Tools Display Modes
Old 01-06-2020, 10:20 AM   #1
Young Gun
 
Join Date: Dec 2019
Posts: 5
TnT S+ barrel.

(I asked in the SRS forums. But I suppose I really should move that discussion here.)

For anyone know if it's better than the original TnT barrel? I can't find and reviews on it compared to the original whatsoever.
  Reply With Quote
Remove Ads
Old 01-06-2020, 10:45 AM   #2
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
It has some sort of ridge in the barrel on which the bb rests. My question is why would you use this, I mean, for the 50 bucks extra, it really isn't worth it.
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 01-06-2020, 12:07 PM   #3
Jr. Sniper
 
Jsmithski's Avatar
 
Join Date: Jan 2019
Posts: 156
You can drill and tap the inner on the bottom, use a small set screw and will get exactly the same result for free (plus you’ll have adjustment).
  Reply With Quote
Sponsored Links
Advertisement
 
Old 01-06-2020, 02:32 PM   #4
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
I have the original TNT vsr10 barrel and it works great. No point in spending the extra amount. If you want to buy an expensive barrel go and spend your bank account on an edgi. Both the crazy jets and normal TNT barrels work just as well as far as I can see.
Though I may be the only sniper on this forum (that I have seen) that uses a TNT barrel full time.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 03-27-2020, 10:45 AM   #5
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
I have a question about the tnt barrels.
How long is the wide bore part? I guess you'll have about the same fps output as a barrel as long as the tight bore part in the tnt barrels, so i need to take that into account. I have read from different posts that the length is 20, 30 and 50mm and even it's 25% of the barrel length. Which one is correct or is it still something different? I was looking for a barrel with a length of 190-230mm. So it's either the 220mm or the 275mm it depends on the length of the wide bore part.
  Reply With Quote
Old 03-27-2020, 11:42 AM   #6
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
It is reasonably short. Not sure. The Airsoft Sniper Mechanic website may have more info as he has written extensively on this.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 03-27-2020, 12:10 PM   #7
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
That's where i got the 25% from, so the 275mm barrel will be ideal for my setup. With the 25% taken away it will have 206,25mm of "usable" length for my fps output.
  Reply With Quote
Old 03-27-2020, 12:50 PM   #8
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
Ok. Does this help.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 03-27-2020, 01:52 PM   #9
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
Thanks but not really. I have a dmr and it's set up for some slight jc. So full cylinder, shorter barrel and heavier piston. With the spring i currently use i have 450 fps with a 229mm barrel which is the limit at my field. I don't really want to put in a bigger spring maybe one bigger if really needed. So the 275mm one will be perfect for that i think.
  Reply With Quote
Old 03-28-2020, 07:41 AM   #10
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
Is the TNT S+ worth it over the standard TNT barrel? The only difference is the extended nub in the beginning of the barrel. But does it reallly work and if so is it worth almost double the price?
  Reply With Quote
Old 03-28-2020, 08:10 AM   #11
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
Not really. Also, you can do that yourself and better. So basically, you drill a hole through the bottom and then tap it and put a grub screw through it. Then you can adjust it up and down.

Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 03-28-2020, 08:41 AM   #12
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
Maybe after some practice on cheap brass barrels but only if the TNT barrel doesn't perform.
Does anyone know the dimensions of the window?
I'm looking to try the TR and the airsoft philpsopher bucking on the barrel. Since the philosopher bucking is 6,6mm and the TR hop 6,2mm i don't know if it would fit on the window.
Would the maxx model 6mm rhop nub be good enough or should i use something else?
  Reply With Quote
Old 03-28-2020, 09:20 AM   #13
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
Philosopher won't fit. Probably. The patch is very very very long. If you look at the philosopher barrel then you can see just how long it is.
I think that both come with their own nub but if not try the stalker panthera.
Sent from my SM-A505FN using Tapatalk
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 03-28-2020, 09:42 AM   #14
Jr. Sniper
 
FMP Airsoft's Avatar
 
Join Date: Aug 2019
Posts: 425
While on the topic of airsoft philosopher, I saw that they have a flat bucking (no mound inside). Since I'm lazy and prone to messing stuff up, would it be better to do this over a modified bucking for RHOP?
  Reply With Quote
Old 03-28-2020, 01:05 PM   #15
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
What i've found is that the airsoft philosopher as well as the tnt barrel have a 7mm long window.
With the philosopher bucking a 6,6mm contact patch and the tr a 6,2mm contact patch.

Airsoft philosopher:

barrel: "The 7 mm long, precision cut Hopup window, has been designed to provide the biggest possible contact area." on this site: https://www.skirmshop.nl/nl/hardened...604-303mm.html

Bucking: "The Concave Bucking is designed to reach the physical limits of accuracy and range. It provides a 6.6 mm long contact patch in order to guide the BB perfectly and apply precise backspin." on this site: https://www.skirmshop.nl/nl/concave-...40o-black.html

TNT:

Barrel: "The HopUp window has a length of 7mm, which makes it possible to use significantly larger printing areas on the bucking." on this site: https://www.begadi.com/tnt-air-cushi...i-ab-18-j.html

Bucking: "The T-Hop Bucking offers a 6.2mm long contact area" on this site: https://www.begadi.com/tnt-tr-hop-bu...-2er-pack.html

So it should work...

For Rhop the most important thing is the airseal of the bucking and the smootness of the area where it touches with the rhop patch. So it should be better since you almost can't make the surface as smoot as one that's already flat.
  Reply With Quote
Reply


Search tags for this page

tnt s barrel

,

tnt s barrel in polarstar

,

tnt s barrel review

,

tnt s vs h barrel review

Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 02:38 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.