Maple Leaf has an AEG MR HOP!!!!! - Page 2 - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Player > Rifles & Parts Reviews
Rifles & Parts Reviews Japan, Taiwan, Chinese, USA made replica rifle reviews

Like Tree31Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 07-07-2020, 07:40 AM   #16
Skara   Skara is online now
Jr. Sniper
 
Join Date: Jan 2019
Location: La Spezia, Italy
Posts: 115
Quote:
Originally Posted by AsianGuy View Post
Are these MR hop supposed to be near as good as r-hop?
Sorry if it’s a silly question, I’m not too verse on the maple leaf bucking lines, and there are so many variant of them
The R-Hop patch and the MR-Hop contact patch are essentially identical and they sit in the same spot.

https://imgur.com/a/mlLNe2D

Some low quality images of the rubber itself and how it sits in a shitty G&G barrel.

The red highlights in the first pic show the two parts that lay on the flat sides of the barrel window, the yellow atrocity is a tiny sealing ring that enhances....wait for it....the air seal :D
__________________
Me bolty:
-Ares Amoeba Striker AS02 in FDE
-Ares steel cylinder with welded pins
-AirsoftPro piston and spring guide
-Guarder SP100
-Action Army hop wheel
-Stock hop chamber with a 3d printed arm
-Maple Leaf 50 MR-Hop + Omega nub
-Action Army 6.03x300mm steel barrel
-Samurai (@printedairsoft.co.uk) straight bolt pull handle and trigger
-FMA Spectre suppressor rethreaded for the barrel 23x1.5 thread
-cheap 4x32 scope

Me secondaries:
-Mk23 (ssx gen 1)
-Action Army AAP01
  Reply With Quote
Remove Ads
Old 07-08-2020, 12:39 AM   #17
Young Gun
 
Join Date: Feb 2020
Posts: 60
@shara

Thank you for the image, that's actually super informative!
SiliconeSword likes this.
  Reply With Quote
Old 07-08-2020, 01:30 AM   #18
Advanced Sniper
 
kazuchan's Avatar
 
Join Date: Oct 2015
Posts: 588
i have two of them, will test on svu and m4 e&C soon.


svu: it seem " boost" few fps than last one, 445 fps +/- 4, 2.9J with .32g . Use for play game is 0.36g


before install it seem nice press inside, but when shooting test, it' keep curved to left a lot. I will try to adjust the nub and report more.


E and C m4 not yet....
SiliconeSword likes this.
__________________
JG BAR-10 G-spec:JJ trigger, PPS cylinder head,Ele m145, ML CJ inner 410mm. ML autobot 60*. ML hop-arm.

ASP SVU : m175 cutted, flat-hop, miracle inner barrel 469mm.
S&T M40A3: m145 element ( cut fews coil ) spring, steel spring guide, stock modifed piston, action army hop-up chamber, R-hop, hephaesthus 6.03mm 455mm.
WELL Mb-08: Stock for now.
SW M107A1: outer shortened.

Last edited by kazuchan; 07-17-2020 at 01:03 AM.
  Reply With Quote
Sponsored Links
Advertisement
 
Old 07-12-2020, 11:37 AM   #19
Jr. Sniper
 
Join Date: Dec 2017
Posts: 425
Messed with the MR-Hop aeg ver on a SRSA2.....and well it's bad. It doesn't hop 0.43 at all (with FAST hop clicking at level 7 it just jams and fails to fire, and anything lower the BB is not hopped at all) and only barely hops 0.36g, and still leaks somewhat even if you teflon it completely. (to be fair the VSR hop does need a substantially larger amount of hop and does jam the same way....but not as fickle as this one)

I think it will be good if you're looking for an AEG bucking to hop 0.3-0.32, but it's not the sniper rifle bucking you're looking for for sure unlike what it's advertised about.
kazuchan likes this.
__________________
My loadout:

-Main: Ares Amoeba AS02
- Inner Barrel: Maple Leaf Crazy Jet 310mm 6.04 barrel
- Hop-up bucking: Maple Leaf MR. HOP 60 Degrees
- Spring: Custom
- Cylinder: Edgi Nemo cylinder kit
- Chamber: Action Army blue chamber
- Spring Guide: Edgi Nemo cylinder kit
- Piston: Edgi Nemo cylinder kit
- Scope: Discovery 3-12*42

-Sub: Tokyo Marui 5.1 Hi-Capa

Last edited by TenshouYoku; 07-12-2020 at 11:41 AM.
  Reply With Quote
Old 07-12-2020, 03:05 PM   #20
Skara   Skara is online now
Jr. Sniper
 
Join Date: Jan 2019
Location: La Spezia, Italy
Posts: 115
Managed to put one in the AK (although I've broken the C clip in the meantime). Overhops .28s like crazy.
Put a GBB one in the AAP, barely hops .3s to 50 metres 😕
__________________
Me bolty:
-Ares Amoeba Striker AS02 in FDE
-Ares steel cylinder with welded pins
-AirsoftPro piston and spring guide
-Guarder SP100
-Action Army hop wheel
-Stock hop chamber with a 3d printed arm
-Maple Leaf 50 MR-Hop + Omega nub
-Action Army 6.03x300mm steel barrel
-Samurai (@printedairsoft.co.uk) straight bolt pull handle and trigger
-FMA Spectre suppressor rethreaded for the barrel 23x1.5 thread
-cheap 4x32 scope

Me secondaries:
-Mk23 (ssx gen 1)
-Action Army AAP01
  Reply With Quote
Old 07-12-2020, 10:32 PM   #21
Jr. Sniper
 
Calebs0615's Avatar
 
Join Date: Jun 2020
Posts: 127
Quote:
Originally Posted by Calebs0615 View Post
Bought the 70 one for my l96 and they sent me the VSR one. I emailed them saturday and havent heard anything yet. 😒😒
So i ended up buying a super macaron. I submitted 2 tickets and emailed customer support and didnt hear back at all. At least they're cheap.
SiliconeSword likes this.
  Reply With Quote
Old 07-13-2020, 12:18 AM   #22
Jr. Sniper
 
FMP Airsoft's Avatar
 
Join Date: Aug 2019
Posts: 425
I open mine tomorrow. Maybe I'll install it and do some testing. My gun is an M14, maybe it'll work differently. It was originally having some airseal issues, hopefully this one isn't too bad! But yes, fps should be around 390 if everything seals well, and I got .32's for it.
  Reply With Quote
Old 07-27-2020, 07:15 PM   #23
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
My experience with the MR hop is really good. I have set it up with a PDI raven 229, omega nub and metal hop up unit on an inferno gen 2 engine. I can't really say anything on airseal since it's hpa and got more than enough airvolume buth it got slightly higher fps then the maple leaf super macaron. When everthing set up right (350 fps on .2g bb's with hop up set on .32g bb's @80-85psi). The joules i got with the .32g bb's where also slightly higher with the MR hop both 50 when the gun was tuned properly the difference was about 0,05J. Also tried some .45's and still lifted it with ease.

About accuracy and range i'm also very pleased. I have got an 2 fps variation so it's very concistent. The max range i'm getting is 70m (bb drops on the ground) with an effective range of about 60m on perfect weather conditions (hitting a human sized tree most of the times about 8/10) all ranges are measured with google maps. On accuracy I have one thing to notice, once in a while I have a flier about once every 20-30 shots this could be due to the bucking not be broking in or maybe a bad bb idk. On the other hand i have got minimal vertical variation in shots buth more of horizontal play in my shots. At my effective range the groupings are about 1 meter in width and 0,5 meter in height. These where better than the super macaron where i struggled with hitting the same tree at 60m.

My thoughts are that the MR hop is the best drop in bucking you can get currently. I have tried some other buckings in different setups like the macaron, tnt tr, prommy purple flat hop, g&g green flat hop, trusight, hybrid, snipetor rhop and modify flat hop. The bucking will fit most of the barrels it fitted my stock barrel and pdi raven very tightly which already have pretty small windows but i know there are some smaller out there and could not fit the bucking. On the other hand the tnt tr hop is also very good maybe even better buth this must be paired with a tnt barrel or something else with a large window so isn't really a drop in bucking.

One more thing to mention is that the gun is feeding every shot correctly but the feeding lips still look slightly larger like whe are used to of maple leaf aeg buckings.
Dimitri MdP and kazuchan like this.
  Reply With Quote
Old 07-28-2020, 03:40 AM   #24
Advanced Sniper
 
kazuchan's Avatar
 
Join Date: Oct 2015
Posts: 588
pretty impressive about it can fit on small pdi inner windows....
__________________
JG BAR-10 G-spec:JJ trigger, PPS cylinder head,Ele m145, ML CJ inner 410mm. ML autobot 60*. ML hop-arm.

ASP SVU : m175 cutted, flat-hop, miracle inner barrel 469mm.
S&T M40A3: m145 element ( cut fews coil ) spring, steel spring guide, stock modifed piston, action army hop-up chamber, R-hop, hephaesthus 6.03mm 455mm.
WELL Mb-08: Stock for now.
SW M107A1: outer shortened.
  Reply With Quote
Old 07-28-2020, 01:21 PM   #25
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
Yes it does fit but it's very tight. I think the 50 fits because of the softness and the patch will deform easier to the barrel window. It could be that a harder one doesn't fit.
  Reply With Quote
Old 07-30-2020, 07:00 AM   #26
Crius   Crius is offline
Young Gun
 
Crius's Avatar
 
Join Date: Feb 2019
Posts: 35
Quote:
Originally Posted by SiliconeSword View Post
Does anyone own a MAXX hop unit to test these in?
I'm really curious as I'm planning out my first DMR
I will buy a Maxx hopup unit for my SR25, and will test these buckings soon:
ML MRHOP
ML Macaron
ML Super Macaron
SiliconeSword likes this.
__________________
Tokyo Marui VSR10 Pro
Tokyo Marui Colt Python 6"
  Reply With Quote
Old 08-10-2020, 02:45 PM   #27
Young Gun
 
Join Date: Feb 2020
Posts: 60
Does anyone know if the Maple Leaf MR Hop Aeg bucking work for PDI or Laylax barrels?

Last edited by AsianGuy; 08-10-2020 at 02:54 PM.
  Reply With Quote
Old 08-10-2020, 03:27 PM   #28
Skara   Skara is online now
Jr. Sniper
 
Join Date: Jan 2019
Location: La Spezia, Italy
Posts: 115
Quote:
Originally Posted by AsianGuy View Post
Does anyone know if the Maple Leaf MR Hop Aeg bucking work for PDI or Laylax barrels?
three posts above yours 😛
They seem to fit PDI barrels
__________________
Me bolty:
-Ares Amoeba Striker AS02 in FDE
-Ares steel cylinder with welded pins
-AirsoftPro piston and spring guide
-Guarder SP100
-Action Army hop wheel
-Stock hop chamber with a 3d printed arm
-Maple Leaf 50 MR-Hop + Omega nub
-Action Army 6.03x300mm steel barrel
-Samurai (@printedairsoft.co.uk) straight bolt pull handle and trigger
-FMA Spectre suppressor rethreaded for the barrel 23x1.5 thread
-cheap 4x32 scope

Me secondaries:
-Mk23 (ssx gen 1)
-Action Army AAP01
  Reply With Quote
Old 08-10-2020, 03:38 PM   #29
Young Gun
 
Juanasty's Avatar
 
Join Date: Feb 2020
Posts: 60
It does fit but very snug and maybe not ideal, when picking up a new barrel to use with the mr hop i would pick a barrel with a slightly larger window.
SiliconeSword likes this.
  Reply With Quote
Reply


Search tags for this page

maple leaf mr hop aeg

Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 06:34 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.