Review of the Maple leaf VSR hop up chamber - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > VSR Rifles
VSR Rifles TM VSR's

Like Tree15Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 04-06-2018, 02:49 PM   #1
Jr. Sniper
 
Join Date: Nov 2017
Location: Summit nj
Posts: 142
Review of the Maple leaf VSR hop up chamber

So this my short review of the ML chamber, I have only fired it in the back garden, my max target is 250ft away( measured). So I received this 2 days ago and on inspection it seemed very well constructed. I installed on to a AA 300mm 6.03 tb barrel, I use a yellow autobot bucking with the metal ring installed ( I will see how this lasts). My base gun is a JG gspec, so this gun had an AA hop up chamber with a monster bucking and omega nub before I installed the ML setup, same barrel.
1, I tested the AA set up for FPS etc before installing the ML chamber I was getting 365 with 45s I saw no great deviation in FPS between hop ups. I am using a M150 AA spring and cylinder, there is resistance though from the ML bb guide as this is aluminum and appears to give more drag to the nozzle ( this may ease with more use as it wears down a touch).
2 Accuracy is the same as the AA chamber with no left or right curve, the ML arm is good fit into the ML chamber with almost zero side play.
3, Adjustment is easy and does not appear to move, I have only fired 100 bbs so far with 45s, the adjustment slider at halfway between the 2 ends and lifts the bbs with ease.
I find the ease and speed of adjustment very helpful when shooting at targets between say 150ft and 250ft. As i donít have a TDC mod. The efficiency is on par with the AA hop up unit. I will update once I have used it in game
  Reply With Quote
Members that say thanks to Handyguy for this post: dulourencini
Remove Ads
Old 04-06-2018, 03:25 PM   #2
Young Gun
 
Join Date: Mar 2018
Location: Poland
Posts: 52
And cost? Which one is cheaper
  Reply With Quote
Old 04-06-2018, 04:18 PM   #3
Jr. Sniper
 
Join Date: Nov 2017
Location: Summit nj
Posts: 142
The ML one is a bit cheaper, however prices seem to vary from country to country
  Reply With Quote
Sponsored Links
Advertisement
 
Old 04-06-2018, 08:21 PM   #4
Experienced Sniper
 
Dimitri MdP's Avatar
 
Join Date: Nov 2013
Location: Mar del Plata, Argentina
Posts: 1,447
Great to know I'm not the only one out there that likes the ML chamber better than the AA.
Both work extremely well, but I really prefer the quicker side adjustment
kazuchan likes this.
  Reply With Quote
Old 04-07-2018, 01:43 AM   #5
Young Gun
 
Join Date: Mar 2018
Location: Poland
Posts: 52
Cqn i adjust it from outer barrel? Like in game just turn left or right to adjust hop up
  Reply With Quote
Old 04-07-2018, 03:35 AM   #6
Experienced Sniper
 
Dimitri MdP's Avatar
 
Join Date: Nov 2013
Location: Mar del Plata, Argentina
Posts: 1,447
Quote:
Originally Posted by Dawidor12 View Post
Cqn i adjust it from outer barrel? Like in game just turn left or right to adjust hop up
The Maple Leaf chamber adjusts just like the OEM chamber in your VSR. It's just the same design, only with some improvements (e.g. the concave arm, clicking precise adjustment) and better materials, produced by CNC so it's perfect quality.
  Reply With Quote
Old 04-07-2018, 05:42 AM   #7
1tonne   1tonne is offline
Silent Warrior
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 5,003
It still is not TDC'ered and so the AA one will better. Over time, the Maple leaf will cause a right hand curve . The more hopup you apply, the quicker this right hand curve will happen. It just will not happen as quickly as what it would with a standard chamber. It would be pretty hard to beat the AA chamber.
I do like Maple products though as they do every now and then, try to think outside of the square (It is a pity they did not think outside of the square for the hopup chamber.)
__________________
Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
What Barrel Length goes with what bb weight in an AEG?
https://www.airsoftsniperforum.com/4...eight-aeg.html
  Reply With Quote
Old 04-07-2018, 09:16 AM   #8
Young Gun
 
Join Date: Mar 2018
Location: Poland
Posts: 52
Good to know, thanks
  Reply With Quote
Old 04-07-2018, 05:59 PM   #9
Experienced Sniper
 
Dimitri MdP's Avatar
 
Join Date: Nov 2013
Location: Mar del Plata, Argentina
Posts: 1,447
Why??? There's no way it will develop the right curve. Everything is aluminum, quite thick and strong
  Reply With Quote
Old 04-07-2018, 07:01 PM   #10
bmr3   bmr3 is offline
Advanced Sniper
 
bmr3's Avatar
 
Join Date: Jul 2015
Location: Northern Cali
Posts: 861
So is the sliding adjuster itself metal in the Maple Leaf chamber? Not the hop arm, but the adjuster


Sent from my iPhone using Tapatalk
  Reply With Quote
Old 04-07-2018, 09:16 PM   #11
1tonne   1tonne is offline
Silent Warrior
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 5,003
Quote:
Originally Posted by Dimitri MdP View Post
Why??? There's no way it will develop the right curve. Everything is aluminum, quite thick and strong
Aluminium is not that strong. I would rather a system that has no chance of the right hand curve.
__________________
Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
What Barrel Length goes with what bb weight in an AEG?
https://www.airsoftsniperforum.com/4...eight-aeg.html
  Reply With Quote
Old 04-07-2018, 10:29 PM   #12
bmr3   bmr3 is offline
Advanced Sniper
 
bmr3's Avatar
 
Join Date: Jul 2015
Location: Northern Cali
Posts: 861
If the adjuster is aluminum, Iím sure it would be strong enough to hold up to the pressure of applying hop. Time will tell, Iím sure someone will let us know if the ML chamber develops a consistent curve. I plan on picking up a ML chamber as soon as I finish my Hi-capa build.


Sent from my iPhone using Tapatalk
1tonne likes this.
  Reply With Quote
Old 04-08-2018, 12:36 AM   #13
Jr. Sniper
 
Join Date: Nov 2017
Location: Summit nj
Posts: 142
All the hop up parts are metal, nothing plastic at all, the metal appears to be aluminum which as a metal does not flex especially not short small pieces, it’s why it is used in full suspension mountain bikes which need a rigid frame to allow the pivots and shock to work right
  Reply With Quote
Old 04-08-2018, 02:47 AM   #14
Experienced Sniper
 
Dimitri MdP's Avatar
 
Join Date: Nov 2013
Location: Mar del Plata, Argentina
Posts: 1,447
Again, the lever is aluminum, quite thick and strong, and a different design than the OEM lever.

I really don't seen how it could ever bend, and further, how bending could cause a curve. Everything in there is aluminum, CNC manufactured and a pretty snug fit
kazuchan likes this.

Last edited by Dimitri MdP; 04-08-2018 at 02:50 AM.
  Reply With Quote
Old 04-08-2018, 03:48 AM   #15
1tonne   1tonne is offline
Silent Warrior
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 5,003
You never know. It may just hold it's ground and not bend. I guess, time will tell.

If it does bend though, at least you will be able to cut off the stick part that fits into the hopup arm (This is the problem piece) and replace it with a metal screw.
__________________
Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
What Barrel Length goes with what bb weight in an AEG?
https://www.airsoftsniperforum.com/4...eight-aeg.html
  Reply With Quote
Reply


Search tags for this page
best vsr 10 hop up chamber
,
how to install maple leaf parts for bar 10
,

maple leaf hop up chamber

,

maple leaf hop up chamber for vsr-10

,
maple leaf hop up review
,
maple leaf vsr 10 hop up chamber
,
maple leaf vsr enhanced hop up install
,
maple leaf vsr hop up chamber review
,
maple leaf vsr hop up chamber which barrel
,
maple leaf vsr upgrade review
,
maple leaf vsr10 hopup
,
vsr 10 hop up chamber erfahrungen
Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Action Army VSR10 Hopup Chamber 1tonne VSR Rifles 669 09-07-2019 03:05 AM
Maple leaf buckings (& why you should use them) Reliku VSR Rifles 159 09-04-2019 03:13 AM
Maple Leaf hop arm (and "QC issues") Dimitri MdP Rifles & Parts Reviews 4 06-18-2018 10:09 PM
New Maple leaf vsr hop up chamber Mattyboyzhere VSR Rifles 19 06-18-2018 07:17 AM
Maple Leaf pistol upgrades necrosis01 Sidearms, Optics, Gear, and Accessories 9 03-18-2018 11:03 PM



All times are GMT -5. The time now is 01:19 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.