Vsr bolt pull - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > VSR Rifles
VSR Rifles TM VSR's

Like Tree4Likes
  • 1 Post By Punto
  • 1 Post By BlackDogAirsoft
  • 1 Post By Corriander
  • 1 Post By 1tonne
Reply
 
LinkBack Thread Tools Display Modes
Old 07-06-2020, 04:58 PM   #1
Punto   Punto is offline
Young Gun
 
Join Date: Jun 2019
Posts: 64
Vsr bolt pull

My jg bar10 bolt pull is rough when pulling and pushing AA cylinder with SCW 90° 13mm spring ive tried everthing im lost. Any tips?
SiliconeSword likes this.
  Reply With Quote
Remove Ads
Old 07-07-2020, 01:42 PM   #2
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 473
Trigger type? 90 degree or 45 degree. Given that you are using a 90 degree piston I assume you are using a 90 degree trigger, however I can't see anything else and some people do accidently pair a 90 degree piston with a 45 degree trigger and vice versa.
SiliconeSword likes this.
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.

Last edited by BlackDogAirsoft; 07-07-2020 at 03:48 PM.
  Reply With Quote
Old 07-07-2020, 02:21 PM   #3
Advanced Sniper
 
Corriander's Avatar
 
Join Date: Jan 2014
Location: Louisiana, US
Posts: 895
Does the bolt wiggle a lot when pulled back? You could have a lost or damaged cylinder guide ring.
SiliconeSword likes this.
__________________
Beware the tactical kitty ears
  Reply With Quote
Sponsored Links
Advertisement
 
Old 07-07-2020, 03:30 PM   #4
Jr. Sniper
 
SiliconeSword's Avatar
 
Join Date: Nov 2019
Location: Vermont
Posts: 244
Maybe the cylinder is grinding inside the outer barrel?
First, take off the outer barrel and stock and test the bolt pull/return.
If it sucks when there is nothing attached you will want to take the cylinder out and inspect the slot and spring guide stopper for rough areas and other wear.
If there is some wear on either, sand them carefully to at least #320 grit and see where you are.
If you try the bolt pull with nothing attached and it does not suck, then you may want to check out Blind Sniper's youtube channel and watch his alignment sleeve video and make one.
If you are still having issues after all of this, loosen/tighten the 2 screws ahead of the trigger guard and just try different amounts of torque as the barrel and receiver will not correctly align themselves.
You aren't really giving us many details, so we are really just guessing
__________________
We all know the guy that says he can split an atom, at 420 feet, with 1J, in the dark, and handcuffs, with a widebore, and a 25mm ER-hop……………

Where you can see my projects and other cool stuff
https://www.instagram.com/silicone_sword/
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 07-07-2020, 05:12 PM   #5
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,833
Check that the spring guide stopper is not catching on the slot that it fits into on the cylinder. To do this, just take the trigger off and pull the cylinder out. Put the spring guide into where it would normally sit in the cylinder and move it back and forwards in the cylinder. If it moves freely, then it is OK. If it is getting caught, just files the sides of the spring guide stopper a little until it moves freely
SiliconeSword likes this.
__________________
There is no advantage with R-hop or Maple Leaf
https://www.airsoftsniperforum.com/3...tml#post425335

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 02:10 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.