Hopup Chamber or tigger set - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > VSR Rifles
VSR Rifles TM VSR's

Like Tree2Likes
  • 2 Post By BlackDogAirsoft
Reply
 
LinkBack Thread Tools Display Modes
Old 07-28-2020, 12:27 PM   #1
CR3160   CR3160 is offline
Young Gun
 
Join Date: Jun 2020
Posts: 58
Hopup Chamber or tigger set

Hey guys, I was think bout upgrading my VSR10 more. I currently have the AA 45˚ piston, cylinder, spring guide, 75˚ bucking, barrel and angel custom sears. I was thinking about the AA Hopup chamber or 90˚ trigger set. I’ve heard the AA trigger set breaks easly and are not worth it. Any brands you guys recommend if I were to get a new trigger set? Which should I get if I could only get one? Pros and cons? *Note I do notice my bb’s flying left a lot. Thanks.

Last edited by CR3160; 07-28-2020 at 12:37 PM.
  Reply With Quote
Remove Ads
Old 07-28-2020, 02:23 PM   #2
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,838
The AA trigger set is definitely worth it. It has the easiest trigger pull out of all the triggers on the market and because of the way it works with roller balls on the inner sear and so the sears do not wear as much as what other triggers do. On the very rear occasion (Once every 3-4 years if used regularly), you may have a little spring break. You can either purchase a new one (US$3.00) or make one easily out of a pen spring and then you have a reliable trigger for the next 3-4 years again.
Each to their own though.
__________________
There is no advantage with R-hop or Maple Leaf
https://www.airsoftsniperforum.com/3...tml#post425335

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
  Reply With Quote
Old 07-28-2020, 02:27 PM   #3
CR3160   CR3160 is offline
Young Gun
 
Join Date: Jun 2020
Posts: 58
Quote:
Originally Posted by 1tonne View Post
The AA trigger set is definitely worth it. It has the easiest trigger pull out of all the triggers on the market and because of the way it works with roller balls on the inner sear and so the sears do not wear as much as what other triggers do. On the very rear occasion (Once every 3-4 years if used regularly), you may have a little spring break. You can either purchase a new one (US$3.00) or make one easily out of a pen spring and then you have a reliable trigger for the next 3-4 years again.
Each to their own though.
thanks! so would you recommend the hopup chamber or the trigger set
  Reply With Quote
Sponsored Links
Advertisement
 
Old 07-28-2020, 02:35 PM   #4
1tonne   1tonne is online now
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,838
Since your bb's are flying to the left a lot it sounds like you need a new hopup chamber mostly
__________________
There is no advantage with R-hop or Maple Leaf
https://www.airsoftsniperforum.com/3...tml#post425335

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
  Reply With Quote
Old 07-28-2020, 04:46 PM   #5
CR3160   CR3160 is offline
Young Gun
 
Join Date: Jun 2020
Posts: 58
How easy is it to adjust the Hopup for the AA Hopup Chamber since there is now arm. I canít find any pictures or videos on it? Does anyone have one and willing to snap a quick picture of it?
  Reply With Quote
Old 07-28-2020, 05:10 PM   #6
Jr. Sniper
 
BlackDogAirsoft's Avatar
 
Join Date: Nov 2019
Location: Earth
Posts: 479
There is a little hex screw at the bottom. You take the mag out, cock the rifle and then stick an allen key in and twist. I believe it is clockwise for more hop. The allen key is a size 2 or something.
To make adjustment easier you can do a tdc mod. The edgi or masada tdc is quite good for this. You can also do a diy one.
1tonne and CR3160 like this.
__________________
Hidden by the leaves...
SiliconSword told me to add the following:
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 05:37 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.