TM G-Spec Double feeding problem - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > VSR Rifles
VSR Rifles TM VSR's

Like Tree3Likes
  • 1 Post By Plazmaburn
  • 1 Post By ycodryn
  • 1 Post By ycodryn
Reply
 
LinkBack Thread Tools Display Modes
Old 07-29-2020, 01:48 AM   #1
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
TM G-Spec Double feeding problem

Based on weapon and custom parts availability in my country I ended up buying the tm gspec, aa piston/cylinder/spring guide, S-Trigger BUDGET v9.2 Springer Custom Works, laylax 170sp spring, airsoft pro hopup arm and chamber BB stopper. I kept the original internal barrel for now, put some spacers, teflon tape on cylinder head and hop up bucket and shimmed the hopup chamber with some hard aluminum piece but I will redo it with a brass piece. I have some double feeding problem. Every time when I`m pulling the cylinder, 1 bb is falling down and the other remains in chamber. Here is a video showing the problem: https://streamable.com/49tpu5
  Reply With Quote
Remove Ads
Old 07-29-2020, 03:08 PM   #2
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,833
Try your old chamber bb stopper.
__________________
There is no advantage with R-hop or Maple Leaf
https://www.airsoftsniperforum.com/3...tml#post425335

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
  Reply With Quote
Old 07-29-2020, 03:59 PM   #3
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
The plastic one? Ok first thing tomorrow. Have a good night and thank you.
  Reply With Quote
Sponsored Links
Advertisement
 
Old 07-29-2020, 05:03 PM   #4
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,833
Yip. The plastic one.
The metal one may be getting caught every now and then. You may need to find where it is catching and file it a little. But I would just use the plastic one. If it was working fine before, then it did not need replacing.
__________________
There is no advantage with R-hop or Maple Leaf
https://www.airsoftsniperforum.com/3...tml#post425335

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
  Reply With Quote
Old 08-01-2020, 12:56 PM   #5
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
**** me with pool and solar panel assembling I had no time to make the changes. I will buy some black silicone to fill in the stock spaces.... make it a little heavier/balanced and reduce vibrations. But again... I can`t wait to raise my 3y baby to put him to upgrade pc/electronics, tune airsoft guns etc. :))) And me? Have a mojito and relaxing....
edit: looking for silicone type to fill in the stock, I found Sikaflex 11 FC+ adhesive (silicone free) with impact and vibration absorbing ("... including but not limited to soundproofing of pipes between concrete and sheathing, adhering and sealing concrete elements, timber and essentially most construction materials") or other brand that is a synthetic rubber silicone. Should I choose the first one? It sound like a perfect choice for a 170sp+ spring vsr....

Last edited by ycodryn; 08-01-2020 at 03:33 PM.
  Reply With Quote
Old 08-01-2020, 04:22 PM   #6
1tonne   1tonne is offline
Veteran Sniper
 
1tonne's Avatar
 
Join Date: Jun 2012
Location: New Zealand
Posts: 4,833
I don't put anything in my stock apart from Bubble wrap. Adding silicone adds a lot of extra weight. Not a little.
It is better to reduce the vibration coming from the outer barrel, muzzle and receiver than to add silicone to the stock. If you can reduce this vibration, there is no need to add the extra weight.
Look for foam RC helicopter landing skids that will fit on the inner barrel (Get them from Aliexpress. The red ones). This will take away a lot of noise and also a lot of vibration that is transferred to the stock. If done right, you will have pretty much no vibration in the stock
__________________
There is no advantage with R-hop or Maple Leaf
https://www.airsoftsniperforum.com/3...tml#post425335

Advanced VSR Sniper Building Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6075
Advanced L96 Sniper Upgrade Guide
https://www.airsoftsniperforum.com/s...ead.php?t=6465
  Reply With Quote
Old 08-02-2020, 11:36 AM   #7
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
Can you tell me please if this part can be removed? I don`t want to ruin it

https://ibb.co/xLkrxkp
  Reply With Quote
Old 08-02-2020, 12:41 PM   #8
Jr. Sniper
 
SiliconeSword's Avatar
 
Join Date: Nov 2019
Location: Vermont
Posts: 244
Quote:
Originally Posted by ycodryn View Post
Can you tell me please if this part can be removed? I don`t want to ruin it
I don't have mine, but if you take it off you can just glue it back on.
Keep in mind that it could make your gun slightly louder if you don't have it
__________________
We all know the guy that says he can split an atom, at 420 feet, with 1J, in the dark, and handcuffs, with a widebore, and a 25mm ER-hop……………

Where you can see my projects and other cool stuff
https://www.instagram.com/silicone_sword/
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 08-02-2020, 01:00 PM   #9
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
I want to put some rubber paste/silicone inside it but I wanted to know if is glued or is like a cover that can be removed... strange design, they could have made it from 1 piece...
edit: Tried to take it out but is hard without damaging it or scratching it. Any tips? Thank you.

Last edited by ycodryn; 08-02-2020 at 03:56 PM.
  Reply With Quote
Old 08-02-2020, 05:45 PM   #10
Jr. Sniper
 
SiliconeSword's Avatar
 
Join Date: Nov 2019
Location: Vermont
Posts: 244
Quote:
Originally Posted by ycodryn View Post
I want to put some rubber paste/silicone inside it but I wanted to know if is glued or is like a cover that can be removed... strange design, they could have made it from 1 piece...
edit: Tried to take it out but is hard without damaging it or scratching it. Any tips? Thank you.
I believe I used a knife or something to get mine out.
As for getting it in, any old epoxy or super glue should do the trick.
And for the filling, unless you want your gun to weigh 15 pounds I would suggest that you use foam, paper, cloth, or bubble wrap as 1tonne mentioned.
I even know a fellow on Instagram called @theweepylamb who fills his stock with snacks lol.
Whatever works for you, but I highly recommend you don't weigh your gun down as most nice hunting are as light as possible unless they are more for target stuff.
__________________
We all know the guy that says he can split an atom, at 420 feet, with 1J, in the dark, and handcuffs, with a widebore, and a 25mm ER-hop……………

Where you can see my projects and other cool stuff
https://www.instagram.com/silicone_sword/
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 08-02-2020, 09:56 PM   #11
 
Plazmaburn's Avatar
 
Join Date: Feb 2013
Location: San Antonio, TX
Posts: 3,513
Send a message via Skype™ to Plazmaburn
One of mine fell out during a game. It was a rather cheap body. I would suggest not filling it with silicone. (Like everyone else has said.) Later on if you decide on, say getting a wolverine BOLT, or some other system that may come out, it will be next to impossible to get the silicone out to mount all the hoses and everything.

One of the more effective fillings I have tried is a combination of wool, memory foam, and old t-shirt. Though that is not a thing with my rifles any more. Replaced the stocks on mine with different ones.
SiliconeSword likes this.
__________________
Don't underestimate me. I know more than I say, think more than I speak, and notice more than you realize.
  Reply With Quote
Old 08-04-2020, 01:39 AM   #12
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
It has a nice feel, is not silicone but synthetic rubber, is not so heavy like silicone and does not have any smell. I put it inside butt and inside stock empty spaces and made a mold for trigger. I will take some pictures after cure time (2-4 days).
SiliconeSword likes this.
  Reply With Quote
Old 08-04-2020, 01:33 PM   #13
Jr. Sniper
 
SiliconeSword's Avatar
 
Join Date: Nov 2019
Location: Vermont
Posts: 244
Quote:
Originally Posted by ycodryn View Post
It has a nice feel, is not silicone but synthetic rubber, is not so heavy like silicone and does not have any smell. I put it inside butt and inside stock empty spaces and made a mold for trigger. I will take some pictures after cure time (2-4 days).
I run a Bolt as of now, but I would be interestEd to try this out.
The main issue is the weight as my gun is already a bit heavy and will get heavier as I am putting at tank inside the stock soon.
What is this rubber called?
__________________
We all know the guy that says he can split an atom, at 420 feet, with 1J, in the dark, and handcuffs, with a widebore, and a 25mm ER-hop……………

Where you can see my projects and other cool stuff
https://www.instagram.com/silicone_sword/
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
  Reply With Quote
Old 08-04-2020, 03:01 PM   #14
ycodryn   ycodryn is offline
Young Gun
 
Join Date: May 2020
Posts: 25
Sika Sikaflex - 11 FC, it activates from air humidity so you can use water to model it easy or use silicone spray/vaseline/oil to repel it.
SiliconeSword likes this.

Last edited by ycodryn; 08-04-2020 at 03:18 PM.
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 01:29 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.