|05-09-2019, 07:35 PM||#1|
Join Date: Nov 2013
A and K m24 Questions
So I got A and K m24 recently and I have been having trouble getting the correct upgrades for it so far I have this ready to order:
I recently ordered an APS2 spring and it did not fit I found that one as a recommendation else where can someone confirm that will fit the piston?
and a Dangerwerks type B hop up arm already installed from my old VSR that finally died.
Im hitting about 430 FPS for average
Im trying to hit just under the 500 FPS mark as that is my fields cap with a .2
and I want to put out .4 bbs and have them actually effected by the hop up arm.
currently it can shoot .4 but it maybe goes 100-150 ft and Im having to adjust my scope to have the BB fall into the target which isn't ideal.
so more or less what bucking would go good with the dangerwerks type b arm and what barrel would help me achieve my goals?
I imagine the issue is the stock barrel and bucking
im looking at this: https://www.airsoftatlanta.com/colle...degree-vsr-gbb
however Im not sure what size the stock barrel is?
Last edited by Easay9; 05-09-2019 at 07:57 PM.
|05-09-2019, 11:52 PM||#2|
Join Date: May 2018
Maple leaf Autobot bucking (60°-70°)
Maple leaf concave hoparm (for vsr)
I'm pretty sure I have that spring in mine. It's longer, but works. Stock spring (for me) shot at 2.5J with 0.48g bbs, that'd translate to 500fps on 0.2g bbs, not including joule creep. It's all about getting good airseal.
Barrel, you'll sadly have to remove the alignment lugs in the hopup chamber, otherwise no aftermarket barrel will fit. Pretty sure the stock barrel length is 520.
I highly recommend getting a TDC aswell, as the hopup adjuster is unstable and can adjust itself down.
Members that say thanks to Fluppi for this post: Easay9
|05-10-2019, 11:59 AM||#3|
Join Date: Dec 2017
The stock hopup unit needs some modding to serve a VSR barrel group but it shouldn't be insanely difficult. Alternatively you can buy the TNT kit for it.
-Main: Tokyo Marui VSR-10
- Inner Barrel: Maple Leaf Crazy Jet 428mm 6.04 barrel
- Hop-up bucking: Maple Leaf Autobot 60 Degrees
- Spring: Maple Leaf M115 For VSR
- Cylinder: Action Army "Masamune" Teflon Cylinder
- Chamber: Action Army red chamber
- Spring Guide: Maple Leaf steel spring guide
- Piston: Maple Leaf 90 degree piston
- Trigger: Action Army Zero Trigger
- Scope: Bushnell 3-9*40
-Sub: Tokyo Marui 5.1 Hi-Capa
|05-13-2019, 02:58 PM||#4|
Join Date: Nov 2013
Thank you everyone that gave me some tips I ended up going with
maple leaf 70 degree bucking
madbull-6-03mm-tightbore-barrel-517mm-vsr10-m28 no bridge
action army AP2/L96 m150 spring.
+ gun and few extra mags
total was roughly 300$ which is fantastic!
after a slight modification to the hop up housing removing the 2 little nubs
This gun is shooting like a dream!
hitting upwards of 250ft-300ft consistently with the hop up barely turned on
I didnt do the TDC mod wasn't comfortable with drilling into my rifle and apparently it wasn't needed I did however find a stronger spring for the adjustment to make it more clicky and much stiffer so it all worked out.
next real thing to work on is the magazines as they get stuck in the gun a lot so looking for a solution for that now.
Fireing off an extra round with the mag button pressed down usually makes it just drop out of the gun but its not ideal.
|a and k m24, m24 questions, questions|
|Thread||Thread Starter||Forum||Replies||Last Post|
|A Few Pistol Questions||OneChickenArmy||Sidearms, Optics, Gear, and Accessories||3||04-24-2018 01:53 PM|
|inconsistency and random questions||Thenoobatsniping||General Sniper Talk||3||08-04-2017 10:16 AM|
|BTC Spectre questions||Plazmaburn||Longrange AEGs||5||07-22-2017 12:13 PM|
|Questions||armor's nail||VSR Rifles||31||02-22-2017 09:52 AM|
|TM G3 SG1 questions||Dramm||Longrange AEGs||2||06-28-2016 09:54 PM|