|11-09-2020, 08:39 PM||#16|
Join Date: Sep 2013
Do either of you know if the maple leaf vsr receivers that already have the hole cutout would work well for the wolverine bolt ?
|11-10-2020, 01:00 AM||#17|
Join Date: Nov 2019
Location: The Estate Of Head Commander Sir S. Sword
I assume that they work well with the BOLT, don't see why they wouldn't.
For my receiver, a Tokyo Marui VSR-10 one, I put a big piece of tape on the inside covering that large hole, and I filled it with epoxy resin and I drilled a very exact hole using a drill press.
In fact, it was so tight that I needed a but of sandpaper and some grease to install my air fitting.
Off topic a bit, but my air fitting was pretty screwed up from the last owner, so I made a new one with a sacrificial Acetal glide sleeve so I don't destroy my cylinder and so I have a smoother pull with less noise.
Also added a 10-32X1/8X90° swivel air fitting and some 1/4X1/8 air line for extra strength (it will support my 152 pound weight while I could break the 1/8X1/16 line with my hands) as well as a significantly faster refresh, which boosted my FPS consistency significantly.
Also polished the outside of my aluminum cylinder (no more record scratch sound) and I made a new extended guide sleeve for the main engine, it's the perfect size, snug but smooth.
We all know the guy that says he can split an atom, at 420 feet, with 1J, in the dark, and handcuffs, with a Prometheus widebore, Prowin chamber, a 25mm ER-hop, and a VFC body
Where you can see my projects and other cool stuff
(\ __ /)
(= '.' =) This is a little rabbit.
(") _ (") Copy / paste it into your signature to help it dominate the world.
Last edited by SiliconeSword; 11-10-2020 at 01:04 AM.
|Search tags for this page|
how to install wolverine hpa bolt in aac t10,
installing upgrade kit for wolverine bolt,
wolverine bolt spring tuning kit
Click on a term to search for related topics.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Advanced L96 Sniper Upgrade Guide||1tonne||Type96||180||10-22-2019 02:52 PM|
|Models||Pitcam||Silverback SRS||17||07-23-2019 06:37 AM|
|Wolverine BOLT in Well MB-02||Ghost_Bear||Bolt Action||4||01-15-2019 10:51 AM|
|Guide: How to install the Wolverine Bolt in a Modelworks M40A5 stock||bobcat||Bolt Action||3||06-07-2017 04:12 PM|
|Wolverine Bolt Install Diary||Zero Hawk||Bolt Action||21||05-09-2017 04:36 PM|