New to forum + feeding problem with TM clone - Airsoft Sniper Forum
       

Go Back   Airsoft Sniper Forum > The Rifles > L96 Rifles > AWS/AW338
AWS/AW338 AWS/AW338: TM L96 AWS, WELL MB44XX

Reply
 
LinkBack Thread Tools Display Modes
Old 01-16-2017, 06:31 PM   #1
Young Gun
 
Join Date: Jan 2017
Posts: 2
New to forum + feeding problem with TM clone

Hi all, names mitch and im new to the forum. Think i posted this in the wrong section but cant find how to delete it. Anyway i have a well mb4402 (tm clone) with a feeding issue when trying to use bbs over .25g. When i am pushing the bolt forward the bb gets jammed about 3/4 the way through what i am assuming is the loading ramp. I have replaced the ramp with a genuine TM ramp and replaced the loading plate with the airsoftpro alloy version. But still the fault is present. I am using .40g blaster devil bbs. I also have baws .25g which feed fine. Any ideas? I was thinking replacing hop up chamber.
  Reply With Quote
Remove Ads
Old 04-12-2017, 09:19 AM   #2
Young Gun
 
Join Date: Aug 2016
Posts: 7
Try with different brand of BB, also happend to me with madbull gray 0.40 bbs, but with Top Arms .40 and .43 they feed fine without any jam, it has to be something with the surface of the bbs, that they get stuck in the ramp wile the fin pushes it, or you can just try to feed the bb pointing the barrel downward a bit, it helps but will not fix the problem.
  Reply With Quote
Old 05-28-2017, 06:12 PM   #3
indycar   indycar is offline
Jr. Sniper
 
indycar's Avatar
 
Join Date: Aug 2014
Location: Bohinjska Bela, Slovenia
Posts: 142
Quote:
Originally Posted by CrazyCat109 View Post
Hi all, names mitch and im new to the forum. Think i posted this in the wrong section but cant find how to delete it. Anyway i have a well mb4402 (tm clone) with a feeding issue when trying to use bbs over .25g. When i am pushing the bolt forward the bb gets jammed about 3/4 the way through what i am assuming is the loading ramp. I have replaced the ramp with a genuine TM ramp and replaced the loading plate with the airsoftpro alloy version. But still the fault is present. I am using .40g blaster devil bbs. I also have baws .25g which feed fine. Any ideas? I was thinking replacing hop up chamber.
Lately I have had same problems with my madbull 0.40g bbs. I fixed it
with 2 small washers (approx 5mm)

Remove your stock (ofc) than remove front and second front screws on the loading ramp. Insert washers and place screws back where they should be. Job done ;)
__________________
WELL L96 AWS

TM hop-up
laylax 6.03 steel 555 tbb
airsoftpro 90deg trigger
airsoftpro cylinder and piston
airsoftpro m150 rated spring

530-ish with 0.20g
450 with 0.28 <-- chronoed with Combro cb-625
  Reply With Quote
Sponsored Links
Advertisement
 
Old 05-28-2017, 06:42 PM   #4
Elsa   Elsa is offline
Young Gun
 
Elsa's Avatar
 
Join Date: Feb 2017
Location: Merica
Posts: 69
Send a message via Skype™ to Elsa
Make sure your mag is in correctly. I had the same problem, and it was my mag jamming to many bbs into it and then a bb blocked the cylinder from going in all the way


Sent from my iPad using Tapatalk
__________________
One Does Not Simply Hit a 100 Yard Shot...

http://www.x-fire.org/e.index.htm

JG Bar-10
Laylax Zero Trigger
Action Army Teflon Cylinder
PDI 6.01 barrel
AA HopUp
Maple Leaf 60
PDI fluted barrel
PDI fluted barrel base *Required for fluted barrel
PDI silencer attachment
PDI flash hider
PDI surgeon bolt
Action Army spring guide
M4A03 rifle stock
PDI Scope Rail
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Well mb4402 feeding problem CrazyCat109 L96 Rifles 1 01-16-2017 06:28 PM
Vsr 10 hop problem Devsniper VSR Rifles 3 12-01-2016 05:38 PM
New vsr problem... Coopshooter VSR Rifles 7 11-16-2016 09:20 AM
Tokyo Marui glock slide problem Purple Heart Sidearms, Optics, Gear, and Accessories 2 11-14-2016 10:54 PM
Tokyo marui vsr 10 hop up problem Devsniper VSR Rifles 11 10-07-2016 06:08 AM



All times are GMT -5. The time now is 06:23 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.