Help! MB4411 Cylinder Problems - Airsoft Sniper Forum

Go Back   Airsoft Sniper Forum > The Rifles > L96 Rifles > AWS/AW338

LinkBack Thread Tools Display Modes
Old 02-07-2020, 02:27 AM   #1
Windage   Windage is offline
Young Gun
Windage's Avatar
Join Date: Feb 2016
Location: United States
Posts: 12
Oh No! Help! MB4411 Cylinder Problems

I am currently upgrading a MB4411 for my local field and I have ran into some problems with the Cylinder. Whenever you try too pull the bolt back its really difficult and when you try too push it forward you pretty much have too hit it back down with a mallet too put it back into place. I have tested it before and after I upgraded the Piston, Spring m150, Spring guide and reinforced 45 Sears. all from action army except the sears (AWS Parts) and it is still doing the same thing . I even sanded down the inner receiver and cylinder and that did nothing. Could it be the sears?

Last edited by Windage; 02-08-2020 at 03:37 PM.
  Reply With Quote
Remove Ads

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 11:42 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.