SSG24 Upgrade advice - Airsoft Sniper Forum

Go Back   Airsoft Sniper Forum > The Rifles > SSG24
Like Tree2Likes
  • 1 Post By BlackDogAirsoft
  • 1 Post By mwrose777
LinkBack Thread Tools Display Modes
Old 02-11-2019, 04:07 PM   #1
xzysus   xzysus is offline
Young Gun
Join Date: Feb 2019
Posts: 12
SSG24 Upgrade advice

As everyone is aware the ssg24 has issues past 80m. Are there any barrels that would increase the effective range and which would be compatible with it? thank you!
  Reply With Quote
Remove Ads
Old 02-12-2019, 10:06 PM   #2
Jr. Sniper
Join Date: Dec 2017
Posts: 345
Unfortunately the SSG is completely proprietary, so any upgrades (like the 6.01 steel barrel) can only be acquired through either novritsch or Modify directly.
My loadout:

-Main: Ares Amoeba AS02
- Inner Barrel: Maple Leaf Crazy Jet 310mm 6.04 barrel
- Hop-up bucking: Maple Leaf MR. HOP 60 Degrees
- Spring: Custom
- Cylinder: Edgi Nemo cylinder kit
- Chamber: Action Army blue chamber
- Spring Guide: Edgi Nemo cylinder kit
- Piston: Edgi Nemo cylinder kit
- Scope: Discovery 3-12*42

-Sub: Tokyo Marui 5.1 Hi-Capa
  Reply With Quote
Old 02-13-2019, 07:20 AM   #3
Young Gun
CallsignRaptor's Avatar
Join Date: Feb 2019
Location: Northants , United Kingdom
Posts: 17
I've got a customers SSG on the bench at the moment .

Out of curiosity what makes them unique? Look pretty standard fare to me , bridged and VSR cut , but maybe I have missed something .

I built a mod24 for someone a while back and used a Edgi VSR barrel ... no issues as long as I kept the rubber as a Mod24 one .

  Reply With Quote
Sponsored Links
Old 02-28-2019, 02:38 PM   #4
Young Gun
Sage2000's Avatar
Join Date: Apr 2018
Posts: 40
Originally Posted by xzysus View Post
As everyone is aware the ssg24 has issues past 80m. Are there any barrels that would increase the effective range and which would be compatible with it? thank you!

Is this a consensus? I would like to know more.
  Reply With Quote
Old 12-09-2019, 12:31 PM   #5
Jr. Sniper
BlackDogAirsoft's Avatar
Join Date: Nov 2019
Posts: 251
I'd say that the barrel can be swapped around so long as it is bridged, but don't change the hopup bucking because those are modify exclusive. This is because the cylinder head is slightly narrower.
  Reply With Quote
Old 12-09-2019, 01:33 PM   #6
Jr. Sniper
BlackDogAirsoft's Avatar
Join Date: Nov 2019
Posts: 251
Therefor the cylinder head fits differently into the bucking lips that a traditional vsr10 bucking.
The bucking opening must be narrower for better air seal.
Basically- swap the barrel for whatever you want just make sure it is the correct length, however, you should not use a different bucking.
If you do want to, you can rhop the barrel and use a standard modify bucking that is flathopped for this.
Also, you can install the full thrust kit, or a tdc mod. There is one you can buy out there that comes as a drop in kit. Not sure where, just look up ssg24 tdc mod 3d printed.
WeekendWarrior likes this.

Last edited by BlackDogAirsoft; 12-09-2019 at 01:36 PM.
  Reply With Quote
Old 12-09-2019, 02:51 PM   #7
1tonne   1tonne is offline
Veteran Sniper
1tonne's Avatar
Join Date: Jun 2012
Location: New Zealand
Posts: 4,739
Not sure if it will fit but an L96 bucking (Maruzen copy) has a smaller hole for the air nozzle. It may fit. Pretty hard to come by though. Action Army has some.
Action Army Company Upgraded parts for Type 96 Product
Live in New Zealand and want Action Army Parts? Check out this thread:

Advanced VSR Sniper Building Guide
Advanced L96 Sniper Upgrade Guide
Choosing the right spring and making it work
  Reply With Quote
Old 12-11-2019, 07:56 AM   #8
Jr. Sniper
mwrose777's Avatar
Join Date: Feb 2011
Location: Texas
Posts: 234
Mine has no issues out to 100 yards. I’m not sure what that equates to in meters, but I’m sure it’s more than 80.

What joules are you running with what bbs?

I switched mine to the short inner and outer barrel, the heavy bb hop up arm, and I’m firing HPA .48s at 3.3j with one of the heavier springs available.
WeekendWarrior likes this.
  Reply With Quote

barrel, question, ssg24

Search tags for this page

can i upgrade my ssg24


maple leaf ssg24

Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Novritsch SSG24 vs Modify Mo24 - Differences - Comparison - Review gigi General Sniper Talk 78 08-22-2019 02:29 AM
SSG24 barrel upgrade length? Domanbal SSG24 5 08-31-2018 05:05 PM
Need some advice on a rifle or upgrade path Bush General Sniper Talk 2 05-21-2018 01:54 PM
Clone upgrade advice Preacherman VSR Rifles 4 01-03-2017 01:35 PM
JG Bar-10 G-Spec upgrade advice! MonkY VSR Rifles 4 10-19-2016 04:13 PM

All times are GMT -5. The time now is 04:52 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.