ssg-24 upgrades

Vsr snoiper · 08-05-2019, 04:31 PM

Hey there. I have a friend who wants to get a sniper, and he wants to know what upgrades are necessary to get an ssg 24 shooting well... I told him changing the spring, getting heavy bb's, an optic(not really upgrades), and extra mags...

mwrose777 · 08-05-2019, 05:04 PM

None really. You can pick your spring when you order it.

AccurateDMD · 08-05-2019, 06:50 PM

I think the point of it is you don't have to upgrade it.

If you want to tech on a rifle, start with a VSR. You can spend the same as an SSG after upgrades and it'll shoot better since the SSG comes with a crappy aluminum barrel and the hop rubber isn't as good as a Maple Leaf.

....Or spend more on an SSG and swap the barrel and hop rubbers out.

Belovoj · 12-27-2019, 01:01 PM

So I have replaced the hop rubber and hop arm with snipetor rhop parts and I plan to replace the barrel for EdGi one.
BUT the most needed thing to do is imho silence it a bit. This helps:

08-05-2019, 04:31 PM	#1
Vsr snoiper Young Gun Join Date: Jul 2019 Location: California Posts: 36	SSG 24 necessary upgrades... Hey there. I have a friend who wants to get a sniper, and he wants to know what upgrades are necessary to get an ssg 24 shooting well... I told him changing the spring, getting heavy bb's, an optic(not really upgrades), and extra mags... beison8000 likes this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-05-2019, 05:04 PM	#2
mwrose777 Jr. Sniper Join Date: Feb 2011 Location: Texas Posts: 243	None really. You can pick your spring when you order it.

08-05-2019, 06:50 PM	#3
AccurateDMD Advanced Sniper Join Date: Nov 2018 Posts: 960	I think the point of it is you don't have to upgrade it. If you want to tech on a rifle, start with a VSR. You can spend the same as an SSG after upgrades and it'll shoot better since the SSG comes with a crappy aluminum barrel and the hop rubber isn't as good as a Maple Leaf. ....Or spend more on an SSG and swap the barrel and hop rubbers out.

12-27-2019, 01:01 PM	#4
Belovoj Young Gun Join Date: Dec 2019 Location: Brno Posts: 3	So I have replaced the hop rubber and hop arm with snipetor rhop parts and I plan to replace the barrel for EdGi one. BUT the most needed thing to do is imho silence it a bit. This helps: