Fools

TheHunter · Mar 25, 2014

So if you guys have noticed I haven't been very active lately but I very recently got an email saying I have a private message so I opened it and this is what I received from your favorite poster

PolackSniper said:
Well, I'm back now and I might be an even bigger bitch(or evil dictator as MiqaFox makes me out to be) than before!
The thing about arguing is that you have to have some form of reasoning behind the position you take. In yours there is none. Perfecting "The Grip" can be helpful in some aspects of using a BASR, but it does not get you a perfectly straight bolt pull EVER, unless you are not using a spring in your cylinder. If it were effortless, we could simply grip the sides of the bolt,cylinder and pull. If you have a proper spring in your rifle, cocking it will not be effortless, so we must have some sort of handle or else our fingers would slip right off. Are you keeping up with this?
Having a handle on ONE side of the cylinder to grip gives you, can you guess??? NON-LINEAR FORCE when pulling. Having your goddam thumb on the other side does fuck all of nothing. No matter what you do(practice, being a perfect human, talking to Jesus), almost 100% of the pulling force is being put on that side handle, causing side to side and rotational movement. The bolt design is fine for real firearms, but is inherently flawed when applied our sirsoft rifles. My idea eliminates all of those flaws.
There are no holes in my argument and there is no reasoning to counter it, other than "I don't want to make my gun different/weird/efficient. I like the regular bolt". That is fine. You can be happy (and even let me be happy) by leaving it the way it is. You have no right to argue against someone else doing it or claiming that they are doing something wrong, especially when there is a decade of experience in airsoft BASRs involved.
I don't make myself out to be a god for inventing something helpful. It's not even on the site anymore, most likely because it is too much for you tacticool opr8rs. I wish I had a writeup of something slightly different from a current concept, but actually 75% cloned and only applicable to a small group of people to put in my sig.
I would love to continue to listen to your narcissistic preaching, but there are other neanderthals who require my attention. You are blocked. I will miss your valuable technical and spiritual contributions.

This was in response to a comment from several months ago. All I have to say in response is....WOW.:shot:

Arktic · Mar 25, 2014

bobcat · Mar 25, 2014

....so he is pissed at you because he doesn't like bolts?

Desert Sniper · Mar 25, 2014

This is why he ticked off, http://www.airsoftsniperforum.com/3...rum.com/32-general-sniper-talk/10047-crazy-ideas-mildly-imaginative-person.html

@TheHunter, so did he just send you that PM? His thread thing happened months ago I would think that he would've let it go by now.

Geograd · Mar 25, 2014

So he posted an idea and people wanted to change it and he got mad? That's very silly.

I've posted plenty of ideas that have been rejected, some even for non logical reasons like my combustion engine idea. People are afraid it will blow up in their hands yet they go out and shoot real steel with no problem. Even if I assure them there will be ever safety precaution possible people still fear it.

AirsoftAssassin · Mar 25, 2014

That was several months ago, why would he still be mad??? So he was mad because of a idea on a straight pull back bolt, that is what I figured from reading it several times.

SnipingSpud · Mar 25, 2014

I am still trying to figure out what he said.

Plazmaburn · Mar 25, 2014

Plazmaburn said:
Its completely cool, I occasionally have to do the same thing.

My theory why people annoy me is that, they are people. People are people, nameless and unknown. They do things, what they do, who knows. People do stupid shit all the time.

Wolfgeorge, Ranger, Lil_Shady, MasterJuggler, you, are individuals. You have a name, you made your name by how you conduct yourself, and what and how you contribute.

They have not done shit. They lack the understanding of the basic fundamentals of airsoft. As well as not having the experience with modification. They also have not "paid their dues" so to speak. This is what I think that annoys most members on this board.

Also they totally remind me of the stupid COD kids that scream "HACKER HACKER!! THEY ARE BEATING ME, THEY MUST BE HACKING!!" When in reality they are the ones hacking and you are just beating their ass because they suck.

This also applies to people who wear the "ass hat". Everyone has worn the ass hat here. PolackSniper is no different. While I applaud him for keeping it to PM, that was pretty much greatly uncalled for.

I understood what he was talking about, but here is the thing... I DON'T FREAKIN CARE. While yes I could possibly benefit from what he was talking about, re-read what I just said in red. If you are going to be that much of a stuck up douche, then you do not need to be here. Go right ahead and block me too, Douche Lord. All that is going to prove is your a mouthy COD playing 5th grader that does not belong here.

Geograd · Mar 25, 2014

Breathe, in and out, in and out

It's just a forum

Plazmaburn · Mar 25, 2014

Yeah, I forget to do that sometimes.

fuzzywolly · Mar 26, 2014

I don't know why I decided to actually read this thread, as I don't really read much of anything in the lounge section anyways. But I figured this would be worth my time and I was sadly mistaken. This Polack guy strikes me as kind of a weirdo. Dont ask me why, but I picture this guy as one of the fluffy kitties with a tierra sitting at the top of the throne (you know with the arrogance and all? No, not getting the reference? Ok whatever, its been a long day, someone text me if this guy shows back up, cause if he does, I'm going to make some popcorn, sit back and enjoy the show he will most certaintly put on. ) I wasn't around when all these shananagins took place, and with that, I have one question for you all before I go back to not reading anything in the lounge.

What the fuc did I just read? More importantly, what did you just read two seconds ago?

That is all.

airsoftmaniacman · Mar 26, 2014

fuzzywolly said:
I don't know why I decided to actually read this thread, as I don't really read much of anything in the lounge section anyways. But I figured this would be worth my time and I was sadly mistaken. This Polack guy strikes me as kind of a weirdo. Dont ask me why, but I picture this guy as one of the fluffy kitties with a tierra sitting at the top of the throne (you know with the arrogance and all? No, not getting the reference? Ok whatever, its been a long day, someone text me if this guy shows back up, cause if he does, I'm going to make some popcorn, sit back and enjoy the show he will most certaintly put on. ) I wasn't around when all these shananagins took place, and with that, I have one question for you all before I go back to not reading anything in the lounge.

What the fuc did I just read? More importantly, what did you just read two seconds ago?

That is all.

You know nothing, Jon Snow.

I'm not entirely sure why I read this either. One thing is for sure, PolackSniper needs counseling.

TheHunter · Mar 26, 2014

The point of this thread was to show how stupid and childish pollack is. And for all the mods to see. This is a perfect example of what people on here are tried of seeing. But apparently the mods don't care to have this type of behavior on this forum...

fuzzywolly said:
...someone text me if this guy shows back up, cause if he does, I'm going to make some popcorn, sit back and enjoy the show he will most certaintly put on...

Unless I miss understood his post :shrug:

@lil shady. His idea was to drill a hole in the back of your bolt and put a D ring through it so you can pull it straight back with no unnessaccary torque put on the bolt. I commented on there trying to bring in other possibilities so people don't go and drill a hole in there gun and regret it.

Bushmaster Recon · Mar 26, 2014

I dont know why I read this thread either.

Lil_Shady · Mar 26, 2014

Wait, what the hell was his idea anyway? His editing of his OP destroys the context.

~Ranger~ · Mar 26, 2014

I'm at a loss for words, I mean.... I really am! I of course had to read, and re read it all.. but, I'm freaking stumped.

I dont know what to say, nor what to do,hahaha.. WTF? Was he banned for awhile, and just came back?

PolackSniper · Mar 26, 2014

Nope. Never banned. Just got sick of this thing.

Hunter, I can only hope that you have run out of bullshit arguments against being innovative and efficient. Enough nay-saying out of you and everyone else.

I wanted to touch on my old ruined thread. I still cannot understand how users managed to destroy it so quickly. It was probably because I had guidlines. I guess on here it is considered courteous to do the opposite of what someone requests. I guess I am the one who needs to work on courtesy in that case.
More technically, I never said that users HAD TO try the first mod my way, or even do it at all. GBB? I never mentioned GBB(can be proven if some one with adequate powers can dig up the original text) . I planned on using a GNBB or AEP but it might be doable with a GBB pistol. Scope rings that just happen to fit around a tapered airsoft replica barrel? Where do they sell those?

Both modifications from the old thread are are up and running on my rifle with great results. I even played a decent sized milsim using them. They were very beneficial to me. I was going to make a video to show you guys. I might still make myself do that.

I never got a chance to message or address you in any way, MiqaFox.
You were a major proponent in the destruction of the 'ol thread. Your attitude of "If there is no rule against it, I'm going to do it!" has been illustrated in my thread and out of it. It is a blatant disregard of courtesy.(Wait, what is courtesy again?) Your posts in that thread were a cry for attention and a failed attempt at white-knighting.

MiqaFox said:
have no possibility to execute.

Yes. The idea was totally not thought out at all and even impossible.

MiqaFox said:
I like your(Polack) second idea, and wow, it actually got beyond the drawingboard. The first one, not so much, exactly the stuff that creates "arguments".

I will let you in on a secret. Do you know what actually causes arguments? Arguing. Posting useless shit that has no basis and is disrespectful to others. Examples:

Dexter said:
@Polacksniper: You made it yourself very complicated.

Zerosliver said:
Makes the gun rather front heavy

MiqaFox said:
Ideas aren't something magical that always are good.

Dimitri MdP said:
you only transform it in a space for smug.

Smug is not a noun.

Political ideology rants in an airsoft tech thread? I'm sure there are better places to have your fun, Guy Fawkes. So go wear your mask somewhere else. (Not you, Sumta. This has nothing to do with your avatar.)

MasterJuggler, forget that thread I said I was working on. These people obviously don't want help. What they want is to be praised and achieve 'Th3 Gr8 OpR8' without any effort. Every member who has a problem with me, go ahead and rant. It wont get you any farther than your bullshit downplaying of my concepts.(At most I will get b&) You have been nothing but talk so far. Feel free to prove my ideas impossible/impractical.

If you fools think I am all talk, ask me for that video.

Lil_Shady · Mar 26, 2014

I'd love to see the video. Though you really need to cut the attitude. Since I guess now we're calling people out, your holier-than-thou attitude is counterintuitive to discussions and is what's truly causing the problems. Take a step back and learn a bit of humility.

AirsoftAssassin · Mar 26, 2014

[QUOTE PolackSniper

Political ideology rants in an airsoft tech thread? I'm sure there are better places to have your fun, Guy Fawkes. So go wear your mask somewhere else. (Not you, Sumta. This has nothing to do with your avatar.) QUOTE]

Way ahead of you Polack, on the Guy Fawkes mask. I am not trying to sound like a A-hole or anything.

But I do like the idea of a straight pull bolt rifle, sounds really interesting. Good luck on the build polack.

Geograd · Mar 26, 2014

Hey Polack, I got no beef with you, but the best advice I can give is ignore what people say and show proof of your ideas working. That will shut people up the quickest way.

Wolfgeorge · Mar 26, 2014

Well I see where this thread is heading so I'll lock it!
I read the OP post and I didn't understand anything, at first I thought I was too tired to understand but then reading what other people say.... it really doesn't make any sence!

Anyway thread locked!

Wolf

Fools

Attachments

Attachments

Top Contributors this Month

Recommended Communities