Airsoft Sniper Forum banner
Cancel
Create thread New Forums

HI! And Budget Bar 10 build

Jump to Latest
1 - 20 of 24 Posts
D

Dallas5534

· Registered
Joined
·
14 Posts
Discussion starter · #1 · (Edited)
I'm new to the forum, but only comment about the build ^^
tell me what you think
https://gyazo.com/00c64d736cfccc3e04e74ee6193aca56

https://gyazo.com/b92d4a84f62be2f0bbd42c7ecf24658a
Bar 10 g-spec -
SPEED airsoft sears (this is the main thing I'm worried about, tell me if you have had any experience with these how good they are) or JJ trigger box
AA spring guide
autobot bucking 70
sorbo pad
maple leaf concave nub -
AA m150 spring -
vsr 10 400mm AA barrel -

I am using matrix .32 bio bbs bc they are cheapo

- = I own these

What Sears would you guys recommend? I would get a zero trigger but those are expensive (new piston and new trigger box)

New list:
ML hop up arm
ML autobot bucking 70 degree
400mm - 430mm AA barrel
sorboed stock piston

JJ trigger set
maybe a Laylax piston

also dont forget DIY mods like teflon and suppressor/stock foam. I'm not going to cut the airbrake though.
 
Discussion starter · #3 ·
Dimitri MdP said:
Can't help with the sears, but if you're gonna run the OEM hop chamber, you need to change the ML nub for ML concave arm. To run the nub on a VSR-10 type you need the Action Army hop chamber.
Click to expand...
Can I just get a different hop up arm? Also is it better to do TDC or just to get the AA chamber, it seems much better to just get the new chamber
 
#4 ·
Dallas5534 said:
Can I just get a different hop up arm? Also is it better to do TDC or just to get the AA chamber, it seems much better to just get the new chamber
Click to expand...
I did the TDC with a maple leaf hopup arm and my gun shoots lasers. But i did have to do a little tweaking and shimming to make sure the arm was perfectly centered. But it was maybe like an hour if that.
 
#6 ·
Dimitri MdP said:
Can't help with the sears, but if you're gonna run the OEM hop chamber, you need to change the ML nub for ML concave arm. To run the nub on a VSR-10 type you need the Action Army hop chamber.
Click to expand...
False. The Maple leaf hop arm has a concave nub & they even have a hop arm that takes the I-key.

Not to mention the new Stalker Panthera hop arm and concave nub combo

Sent from my iPhone using Tapatalk
 
Discussion starter · #9 · (Edited)
I'll get the ML Autobot 70, the nub, and the arm as above ^

But I was also thinking about doing a flat hop mod, should I still get the autobot bucking for that?

I want to keep stock piston, for the airbrake (add sorbo) I'll need to change it to a 90 degree I think
JJ trigger seems awesome
I have a cut m150
do I need an AA spring guide??
Ill also put that 400mm AA barrel in when I get the parts

ALSO do you guys think stock Bar 10 nozzle is good for autobot bucking or what would you recommend?
 
Discussion starter · #10 · (Edited)
Also, If I do a Flat hop mod what bbs (bio bbs) would you guys recommend, I'd prefer to buy from AirsoftAtlanta.com

Update:
sorbo - 4
homemade eraser flat nubs
ML hop up arm - 18
ML hop up bucking - 9.5
AA spring guide (do I need it?) nope Im ditching it
JJ Trigger box - 44

90 with spring guide
70 without
 
#11 ·
#12 ·
Dallas5534 said:
I'll get the ML Autobot 70, the nub, and the arm as above ^
Click to expand...
Again, no need for nubs with the OEM hop arm (or with the Maple Leaf hop arm, it has a built-in "nub").

As for the bucking, Autobot without the metal ring is OK for the OEM nozzle.

Maple Leaf hop arm + ML bucking is superior to flat hops, so just toss in the bucking as is
 
Discussion starter · #14 · (Edited)
At my field you can either run up to 475 fps with a MED of 50ft
or 475 - 550 at an MED of 100ft
I'd prefer the shorter distances so probably around 470fps

I bought the arm and the bucking, they are doing very well on the 400mm AA barrel!
I just ordered the JJ trigger set. (will update on this, an employee at AirsoftAtlanta was very interested in its results)

I'll be modding my piston to be a 90 degree, and I have a cut m150 (type 96 so it was too long) spring ready as well.
I heard with the laylax piston you can change the airbrake length, does anyone have experience with those? Or what Airbrake piston would you chose?

ALSO I really want a TM mk23 but I can't find one, where can I get one? Currently I have a silenced KJW mk1 and its ok but not too impressive. (hey you get what you pay for I guess, they are only 40 bucks haha, I want a new pistol because the mk1 gets air bubbles, low mag capacity, and the accuracy isn't stellar, the sound is pretty good though after pvc silencer mod)

you guys are being a world of help, this forum is the best :)
 
#18 ·
Adding weight will slow your piston speed down giving you less energy.
Is that what you want?
What effect did you want the weight to do?
 
#20 ·
Get rid of the air brake.
 
1 - 20 of 24 Posts
About this Discussion
23 Replies
8 Participants
Last post:
Dallas5534
Airsoft Sniper Forum
posts
245K
members
25K
Since
2006
A forum community dedicated to Airsoft Sniper firearm owners and enthusiasts. Come join the discussion about optics, gunsmithing, styles, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
General Sniper Talk VSR Rifles The Lounge New Member Introductions & Tips Others