Have my Well l96 mb01.
AA Hop up
ML Macaron 70
AP red cilynder inners
AP M180 spring (610fps with 0.2. Field limits 650fps)
Prometheus 509mm 6.03 barrel (Cylinder/Barrel ratio 2.23:1)
Question:Is that barrel lenght for my setup is fine? Because i find...
First of all, it's "source", not "cylinder"- some of us are HPAholes :yup:
Is there convincing evidence that the "ideal" (creates the most muzzle energy- adjusting barrel length causes reduction) source/barrel volume ratio also creates the most accurate/precise trajectory...
Hi everyone! I know 10 meters is very short distance for sniping, but, with my m28, stock barrel no crowning, without tdc mod at 10 meters i can shoot one bb an the seconds, third...in the same bb hole. Can you do the same with your upgraded rifles? At what distancies you can shoot un the same...
A pretty strange problem with my well MB02 which is shooting at " ~0.9 Joules.
Stock Cylinder group,
Maple Leaf Crazyjet barrel 430mm,
Maple Leaf 50 degree autobot bucking,
Maple leaf concave nub,
So my problem is that sometimes the BBs will fly dead straight...
You might say this is a silly question, but I can't think of a go-to answer, and it's something I've been interested in for a long time.
The search for perfect accuracy is endless, but with the recent implementation of my HPA rig, my set up is so highly tuned that I'm convinced it is a...
Hey everyone! Has anyone on this site done air drag and trajectory calculations for airsoft bbs? (not counting spin of course). I have been doing some today, it could be useful information. Let me know if you guys are interested.:tup:
Alright, I recently picked up a WELL MB01 and I plan on buying some upgrades since cyber monday is coming up. I plan on purchasing
Action Army Hop up
R hopped barrel
Action army piston
action army z trigger.
The stock performance is awful, as expected. It typically gets around 120 ft range, so...
Hey guys, I was just wondering what the community thought about this video and what I could improve on. It's my first video so if there is anything you guys tell me to help me improve, that'd be great. Click here for the video
So just recently got the real sword AEG SVD and it shot quite well until it stopped feeding. I don't know if this was because of the mag, low power battery (7.4 lipo, getting 9.6) or problems in the gear box.
So anyways I opened up the gun with my dad and we cleaned the inside of the gearbox...
Hi this is my first post but I have been trying to really increase the accuracy and range of my ICS sportline m16. I recently bought the upgraded m120(i think) upper part of the gearbox. But now I need accuracy and range. After doing alot of research on different spacers like scs(same as rhop...
So I have a Bar-10. It has the common issue of spinning to the side at long distances due to the hop up. I've read Masterjuggler98's guide to the mod (which was very helpful, by the way) and still have some questions:
Will the mod completely take care of the hook, making it shoot perfectly...
I'm sorry to post two threads about this gun, but I have different concerns. I am contemplating returning my Bar-10 and getting a replacement. Firstly, the bolt on the gun "acts up" quite a bit. It commonly gets stuck while in the forward position, and prevents me from cocking the gun. Also...
First off, I am new to sniping. I recently bought a JG Bar-10 rifle. I like everything about it, except for the accuracy. I measured my shooting distances, and the rifle is perfectly accurate at 105 feet. However, at 150 feet, the rifle is very inconsistent. The scope has been dialed (at least...
Hey everyone, I am currently trying to stabilize my project rifles long range grouping as much as possible. I use an Ares CNC AW338, its been HPA converted and equipped with a real steel stock. I can send rounds with a flat trajectory to the 300ft mark but my grouping could be better. I have all...
I have read around the net now for some time, but i still haven't got to a final conclusion which bore size is the best in terms of accuracy for a G-spec size rife.
A tighter bore (6.01mm) often equals to a higher FPS, but also jams more often if not cleaned enough. But may not have better...
Hello all! I recently aquired a gas ares AW338, but many problems have arose. After looking for certain parts the market seems to be slim also. Does anyone happen to have a decent amount of Knowledge about this gun?
Is there any advantage to using longer inner barrels (with correctly matched cylinders, of course). I've heard very controversial reports on this subject. For example, take an SVD with a 690mm barrel vs an AK47 with a 455mm barrel, with both guns having correctly matched cylinders and...
My true-to-life installation log and testing of the R-Hop on my Tanaka M40A1. I recorded this completely unscripted, from the beginning, for my first R-Hop installation ever.
Quoting R-Hop creator, HunterSeeker: "The idea behind the R-hop is to produce an extended contact with the BB for more...