action army

Okay so I'm looking to purchase an AA t11 as for all the research I have done points to it as a good overall platform over complete ground up jg bar 10, or out of the box ssg10. My question goes out to people with experience with this rifle as I want to know what are some essential upgrades I...

Bought this VSR10 from Airsoft Atlanta to play airsoft with my son. Had a few good games in and unfortunately need to sell. Learned I had eye cancer and had right eye removed. Need to protect the remaining eye as best I can and unfortunately that means giving up airsoft. This VSR10 is built...

Howdy everyone! So I am new to the AA hop up chamber, I just got mine installed with a Decepticon Blue bucking and wowza, probably the most noticeable upgrade I've done. It works fantastic! But, I just wanted to ask you knowledgeable folks if there is any common issues with the AA hop up...

Greetings guys! Recently just bought a Action Army Hopup unit for my WELL along with an aeg 500mm Laylax barrel, Tried to install it today except I was having some issues with the rubber sealing with the cylinder head. I am using a 70 Maple leaf macaron hopup with a maple leaf nub, The issue is...

Hi Guys, My name is Paul and i am new to airsoftsniping. I bought a 3 month old upgraded Well Mb 03 for 230€ from a friend - i think ist a good deal... I like the gun, everything works nice and smooth and it shoots straight. The only issue i noticed is the Hitbox at About 60 Meter, the hits...

Has anyone ever done this, and more importantly, succeeded? It is this PDI end cap: PDI VSR-10 End Cap I know that you can just buy the AA end cap to go with the AA cylinder, which is what I already have. I am just curious as to whether anyone has successfully put the PDI end cap on the AA...

Hello, Does anyone know if the maple leaf VSR receiver works with the AA bull barrel? I'm looking to buy the AA 300mm twisted outer barrel if and only if it works with the maple leaf VSR receiver. Any information is greatly appreciated!! Cameron

TL;DR: is the Angel Custom VSR barrel compatible with an AA hopup chamber with ML bucking? I've got a CYMA VSR that is heavily modified (I said I R-hopped it before, I was mistaken on that, I simply put an ML hopup on it. My bad, still new to sniper rifles). It's got ML sears, cylinder, hopup...

I just recently got an Action army hop up, inner barrel, bucking, and M150 spring. I do plan on upgrading everything else soon, but what results should I expect from just the hopup, inner barrel, bucking and m150 spring? Along with that what weight BB should I use that would work best?

What's going on guys just a quick question, i have a Action army Teflon cylinder with the blue 90 degree piston, i recently played a week ago and decided to clean out my gun i noticed when i put my finger over the cylinder head and shoot i don't have good compression, the pressure just exits...

Hi, I am looking to upgrade my TM VSR10 and have picked out the following parts: Action Army Hop Up Chamber Laylax SP150 Spring Action Army Spring Guide Action Army Cylinder Action Army Zero Trigger Maple Leaf Hop Up Arm EdGi Inner Barrel What do you think of this? I want to go with a maple...

Hi all! I would be eternally grateful for some feedback and help on this. I am somewhat undecided on what spring I need for my gun. I am currently running an upgraded MB03 VSR-10. Not much of the original is left though. The upgrades are: Action Army 6.03 430mm Inner Barrel Action Army Hopup...

Hey! i have owned a l96 mb01 for a year now and i have managed to fully upgrade it. I have upgraded basically all parts and im hitting enemy players every 1.2 shots, maximum range i have hit with single shot is 110m, but usually i dont go over 90m, which is basically maximum for that rifle List...

Hello, I'm from England and I'm looking to get an MB-01 to get into sniping. I have done A LOT of forum lurking and research and this forum has been seriously helpful so thank you. I have all the things ready for DIY mods to do initially once I get the MB-01, teflon tape for threads...

Hi all, I got an Action Army hop up chamber and new barrel (Laylax 6.03 550mm) for my VSR-10 a little while ago. (I believe the gun to be shooting in the 420-450 range.) I got everything set up right with the hop up and barrel and it was shooting amazingly well, but am struggling with another...

I lost the C-Clip for an Action Army L96 Hop up.....MIA. If anyone has one they are not using because you used the heavy Teflon tape approach then I'm willing to buy it from you. PM me and we can make a deal. - Z

I got a fully working bar10 for 25 and am going to do some upgrades. I am going to put a mancraft into to it because adjustable fps and light bolt pull. So I was originally thinking a Aa hop up Aa 430mm 6.01 inner barrel Maple leaf 75 bucking Promy flat nubs (2 pack) I am wondering if any one...

Ok, I bought the Action Army Hop up unit for my L96 UTG based on other review it seemed like a good upgrade. I also purchased the AEG Maple Leaf 70deg bucking, and nub as well as a AEG Prometheus 6.03 barrel. I was getting 480fps with 0.25 bbs with the stock HU unit, and madbull 6.03...

Hey guys, hope to get some help here on my problem: just installed the Action Army S-Trigger Set, had some problems during installation (piston sear wouldt catch the piston) but I managed to get it working, I really like the new trigger set, I got 15fps, the bolt pull is really easy now and...

I recently switched my vsr 10 to an hpa system, but i am not too happy with it. the reson i switched to hpa was because of how easy the bolt was to pull back and still get a high fps. When i was running spring I had an m150, an AA hopup chamber, guide, piston, and cylinder kit, and 6.03 barrel...