Search Results for ‘bar 10’

So I have a BAR-10 which i upgraded with the following SCW 90 Trigger, Piston & spring guide Maple Leaf M135 spring AA Hop up chamber Autobot bucking & omega nub, Crazy jet 430mm barrel After intial install of all that everything seemed great, around 2.18J fairly consistently, and played a...

I'm aware that I'm expected to have a first post that details my build, and I JUST was in the process of taking care of that when something rather disturbing came to my attention. I had FINALLY received my JG Bar 10 g spec I'd been expecting for forever (from evike) and had just cracked it open...

So recently I got my Bar10 set up with an R-hop, after a few weeks, It started shooting over-hopped even when I've set the hop zero. someone told me that it is hooking and I have to tdc it but i kind of want to make the gun as clean as I can and still use the knob on the side. can anyone tell me...

Is it apsolutely necessary for me to upgrade my cylinder on my bar 10 as they are quite pricey. Is it ok to leave it stock or do i have to upgrade the cylinder head or the whole cylinder and head? I'm currently shooting at 490 fps. If it is mandatory, please say a good, but budget friendly...

So this is the setup I'm running at the moment, please comment on any improvements that I could make or anything wrong. Cheers. Gun: Bar 10 Mods: Crazy Jet 6.04 or Action Army 6.03 inner barrel (advice on which one please) Maple leaf 60* autobot bucking Maple leaf omega nub Action army...

I have a Bar10, So Im just wondering what is the use of Maple Leaf's I-key that comes with the Maple leaf hoparm. What is its function?? Do I still need a hop tensioner or the hop nub?? Whats the difference between the hop nub and I-key? im really confused. thankyou!

For anyone thinking of buying a new bolt handle to replace the stock one for your vsr/bar 10 rifle I would suggest this JG replacement bolt handle: https://www.evike.com/products/36776/ for $12. I had issues with the stock bolt since it dug into my hand way too much and this JG bolt is much...

I'll post a WTB thread later but for the time being I wanted to know where you all buy your receivers from. Currently, the receiver I'm using is a friends, because the receiver I'd bought was riddled with stripped screw holes. And I'm sure my bud would love to have his receiver back. So I'm in...

So recently I got my JG Bar 10. The problem is that the barrel I also got is too wide and an AEG barrel. I know that I can mod my hopup but I don't want it so that I can't use normal VSR 10 barrels with it, so instead I decided to return it. The problem though now is that I can't find any good...

Hello I was wondering if anyone knows a website I can get a two tone Jg bar 10 from int the uk. If not does anyone know any good alternatives to the bar 10 preferably around £90-£150? thanks:tup: (I'm new to this forum so sorry if my post is bad or I did something wrong.)

I got a fully working bar10 for 25 and am going to do some upgrades. I am going to put a mancraft into to it because adjustable fps and light bolt pull. So I was originally thinking a Aa hop up Aa 430mm 6.01 inner barrel Maple leaf 75 bucking Promy flat nubs (2 pack) I am wondering if any one...

Hey guys, I'm about to get some upgrade parts for my BAR-10 G-Spec, however I cant find the right barrel. I'm looking for a 6.03mm 302mm (stock length, not sure how to get the barrel into the supressor) and without a bridge (want to use the ML bucking and a concave nub) Couldn'd find any...

Hey guys just wanted to ask somethings... first what should i upgrade first to last? if anyone here is experienced with this rifle can you recommend me a list of parts that would go best with this gun to upgrade it with maybe a lighter springs since the limit is 450 here. thank you all

Hello guys. So i have a few things i wanted to know somethings and be able to have really updated information. i want to know if i should just get a TM vsr rather than a jg bar 10? Can someone please list in order of what i should upgrade first to last on a sniper rifle? Can i also know how i...

Hello, I have Echo1 M28 spring rifle and it just started to mis-feed. After replacing stock cylinder with Angel Customs cylinder and cylinder head (got on evike.com) it started feeding whole magazine into cylinder chamber. I've googled for the problem and majority of forum posts were indicating...

Hey guys, my name is Blake and I've been of and on airsofting for about 10 years. I'm primarily a back yard plinker who simply enjoys hearing the ping as a precision placed bb bounces off a can. My current platform is unforntatly the WELL MB03 since thats what my local shop had. The gun is...

As the title states: What nub should I get for an Action Army + Firefly Soft Bucking combination. These three parts (plus a PDi 430mm 6.05 Barrel) will be my first upgrades in this BAR-10 G-Spec. Also I do realize I need to get a new trigger and piston combination to make the gun more...

Hello I'm John from Kentucky, been airlifting for about 5 years now, always used an AEG m4 setup but recently decided to get into sniping. I had a Well L96 and sold it, now looking into getting a Bar 10 and doing upgrades.

So the tutorial here currently here on the forum doesn't work for me. Almost none of the tutorial shows up. Also I am only painting the rubber outside of the gun. So not the scope or metal. For example (I am pretty sure this is what I am supposed to do) 1. Sand away the rubber stuff. 2. Get...

*Just to state again, I am posting for a friend who doesn't want to make an account. Me and my friend have a big OP coming up, and my friend was getting his gun fixed when the guys said that his gun is toast :/ He just got it and only used it at a game once so I feel pretty bad. The OP is this...