Airsoft Sniper Forum banner

bar10

  1. VSR Rifles
    Hi everyone, im planning to get a jg gspec since i've seen a good offer on a site. I'm planning to replace the cylinder, hop up chamber, piston, trigger etc... but i want to know if is it possible to use a 430mm inner barrel, since I already have a mapleleaf crazy jet, and i dont want to get a...
  2. VSR Rifles
    So im going to try to explain this the best i can... basically i have a action army cylinder and an orange action army piston. however, the air seal is really poor which I belive is really effecting my consistancy. (from holding my thumb over the cylinder head and shooting). Im 99% sure its to...
  3. VSR Rifles
    So I have a Bar10 Gspec 550fps with full Edgi Kit with a customize hop arm and a 9ball hop rubber with stock hop chamber and a TDC mod. Im not really satisfied with my hop assembly because my bbs are not precise. I just want to ask if a maple leaf hop rubber and maple leaf hop arm can fit to...
  4. VSR Rifles
    I created a video to illustrate my problem which you can view here: Basically my gun is not shooting consistently straight. the bullets could go up, down, too high or way too low but there is no telling what the next shot could do. I believe it could be to do with my hop up bucking but I am not...
  5. Wanted
    Hello to our community.Id like to buy a stock vsr10/bar10 from either tm or jg.I also look for upgraded rifles full action amry or pdi.Only within the european union.Thanks for your time.
  6. Bolt Action
    Before we start i want to say that this build was inspired by Snakebitey and his builds, but i have to say that i also had this same idea before seeing what he was doing with his VSR =) Go check his channel and builds :cheers: https://www.youtube.com/user/theoriginalllama/videos BE AWARE; I...
  7. VSR Rifles
    Hello guys, I have encountered some problems with my sniper rifles.I have a couple of questions for You,hopefully you will be able to help. I tried installing ASP zero trigger from my BAR10 on to the FN SPR and i have encountered a problem with the stock of FN. It looks like that zero trigger...
  8. VSR Rifles
    Hello everybody im Andrej and i need hellp for buy and upgrade JG Bar10. In advance i apologize for my bad English :D I was wondering what you suggest. I imagined something like that: Rifle (only): JG VSR-10 / BAR-10 Airsoft Bolt Action Sniper Rifle w/ Metal Trigger Box - 450 FPS (Package...
  9. VSR Rifles
    Hey there, Bought some spare magazines of TM to my BAR10 and they aren't feeding well, only the first bb shot's.... Aprecciate any help :tup::tup: Cheers JauTz
  10. Others
    Hello, I have owned a VSR10 for the past few months, and have been working on a mixture of reasonably priced and practical upgrades and home upgrades. My most recent upgrade is an Angel Customs 480-550 FPS spring. My ultimate goal is, of course, accuracy and consistency, and this spring has...
  11. Others
    Hello, Another question about my BAR10. I have 2 mags for my rifle. A 55RD double stack and the stock 30RD. With both mags, after a few shots, when I pull the cylinder back, a BB will get on top of the cylinder head and keep it from going all the way foreword. I then have to take out the...
  12. Others
    Hey! I have owned my JG BAR10 for a few months now, and it has gotten a lot of use, had some repairs and a few upgrades. Most of the playing I do is with a group of 6-8 guys in the area. We all have AEGs, or gas pistols and/or sniper rifles (Mainly me). I have had my gun taken apart for...
  13. Rifles & Parts Reviews
    Hey guys im new to this Forum and want to start sniping. My first question would be: What rifle is better for sniping and upgrading, the L96 or the VSR-10? What aftermarket brands should I avoid? What aftermarket brands should I get? What should I upgrade first? And maybe some tipps overall...
  14. VSR Rifles
    Hello all, I recently installed SHS 1st and 2nd sears into my bar 10. I compared the new sears to the stock ones, and after minor sanding, installed the new sears. the cylinder cycles fine, although the trigger will not fire the gun. The trigger will pull slightly back, and stick, and the...
  15. VSR Rifles
    Will pay with PayPal only. Must be in good condition. Seller should contact me to discuss specifics. Thanks guys!
  16. VSR Rifles
    Ok, I've been posting too many threads all on the same gun, so I'm just going to put it here and update it as I upgrade my gun. THE GUN: A JG Bar-10 Gspec CURRENTLY INSTALLED: 1/19/13- Marui Hop-Up Chamber w/ a Marui inner barrel NOTES: 1/19/13- Installed the Marui hop-up chamber/barrel...
  17. Others
    Modding started simple when i bight the gun used 50$ basically new /w scope. From here airbrake delete. Good two years later light use slam fire. Fixed hat with new sear and rotating my piston. two weeks earlier i couldnt hit anyone it was bugging me. Bbs would fly dead straight 150-175 ft curve...
  18. Rifles & Parts Reviews
    Alright, Yesterday I just got my REAPS is the mail and installed it. I can say that it gets pretty good accuracy with my eraser nub, but it does NOT provide a flatter trajectory as an rhop would. The airseal was alot better than the stock bucking. The accuracy seems a bit better, although I...
  19. General Sniper Talk
    I'm looking for a new bucking because mine is behaving inconsistently, and I would like better compression between cylinder nozzle and the bucking. I want an air seal bucking (like the nineball) but I can't find any good ones. Obviously the nineball is my first choice, but that thing is out of...
  20. General Sniper Talk
    I've got a stock (DIY modded) BAR10 with no upgrade parts. Will the IR Hop Z kit (http://www.airsoftgi.com/product_info.php?products_id=10710) fit the barrel window of my BAR10? The kit comes with 3 different patches, and I'm just wondering it one was designed for BAR10/VSR10 barrels. Also, can...
Top