Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 18 Results
  1. Sidearms, Optics, Gear, and Accessories
    I am considering getting a aeg gearbox and design a side arm from scratch. In order to make it 1) easy to carry 2) easy to use in one hand 3) Quick to draw I intent to make it as short as humanly possible. Would need around 1.2 joule with 0.25bb How bad would it be to use a 100mm barrel or...
  2. Longrange AEGs
    So, I got a cyma svd-s However to shoot more heavy bbs, the inner barrel is way to long. Proberly need to cut it down almost 15cm according to cylender vs barrel calculation. Planning to use 0.43g bb. However what effect will happen with the long outer barrel in this case? Will my joule be...
  3. General Sniper Talk
    I've a striker as02 and wit a 300 mm barrel with a 6.01 diameter I reach at 1j with zero friction by ESC with 0.40g bbs 75meters: I want to change now my piston and try to create my own one... I was thinking to made it a bit longer so I can reduce the run of the charger: I know that in this way...
  4. Others
    For ares striker as-02 (and others strikers), due to its different cylinder that is shorter than normal cylinders: which lengths of inner barrels do you suggest? Short inner barrels reduce range and accuracy? Short inner barrel reduce joule in generally? I want to reduce the length of my...
  5. VSR Rifles
    I had the opportunity to test out the barrel/cylinder ratio and it did not end as expected. First i tested the 430mm 6,01mm barrel and the results were awesome. Longer range with heavier bbs and accuracy was also on point. I cut it down on the milling machine and carved the end so there was no...
  6. General Sniper Talk
    Hi Guys, My name is Paul and i am new to airsoftsniping. I bought a 3 month old upgraded Well Mb 03 for 230€ from a friend - i think ist a good deal... I like the gun, everything works nice and smooth and it shoots straight. The only issue i noticed is the Hitbox at About 60 Meter, the hits...
  7. Type96
    Hello, I've been running my Type96 at 2.5 joules or 367fps (Field limit) with a .4, a 509mm madbull v.2 barrel and a AA type96 cylinder, piston and chamber with a mapleleaf 70%bucking. But I find myself wanting too get a shorter barrel from Prometheus to use the cylinder too barrel ratio to a...
  8. L96 Rifles
    Hey guys, first post on here. So recently I've been working on my MB4411D's loadout and I decided that I want to buy a shorter barrel for the gun, I've already completely taken apart the entire gun multiple times and have a good idea of every part with the gun, however, I've never done an...
  9. L96 Rifles
    Hello everyone, This may sound stupid but I have some questions about the barrel length. Does it make any difference if the barrel is extra long? like if its 650mm? I know that some people have talked about cylinder volume and how you want the barrel to have the same volume of air as the...
  10. General Sniper Talk
    Hey guys, I have a question. I bought the Action army type 96 hopup chamber and I also bought an action army 6.01 barrel for it. That ended up being the wrong barrel, it was not an AEG style, it did not have a notch for the c-type buckle. I aslo noticed the barrel was about a .5 inch long. My...
  11. Others
    Hi, I have a few questions about upgrading my SW M24, as i'm kinda new to the game. i already installed a pdi cilinder set + spring and a new sear set. but i still need an inner barrel Hop-up chamber and bucking. but i can't seem to find out the lenght of the inner barrel. Can someone tell me...
  12. Rifles & Parts Reviews
    Hi guys, I'm new to the forum and had a question... What exactly is the difference between a JG VSR-10 or JG VSR-10 G-SPEC? I think they are the same except for barrel length... again, I'm new to all this. Aaand would barrel length affect anything? Thanks, Rumble
  13. Others
    Hey guys, so i've done so much research on this stuff, and i am finding so many different opinions on parts that i should get for this mb4402 Some people say that I should focus on the hop up first. Others say that i need to start with a better barrel, or trigger packs, or cylinder internals...
  14. General Sniper Talk
    I have a DE M57a and i am doing all of the general upgrades soon (cylinder, spring, spring guide etc) and i wanted to put a tightbore (6.01mm) inner barrel in it. I then thought, if i custom made the inner barrel, i could make it longer than the generic 640mm long barrel that there already is...
  15. Web Deals
    Custom cut PDI barrel length. Should have known that 1 month ago.... X-FIRE PDI official distributor
  16. Others
    Sup brahs, Samurai Brah is in. I have a question about the cylinder on my Well MB05. I'm assuming it used the same cylinder as the MK96 as every part is compatible. What I want to know is how much volume the cylinder has. I'm wanting to determine the perfect barrel length for my gun, but I...
  17. General Sniper Talk
    Is there any advantage to using longer inner barrels (with correctly matched cylinders, of course). I've heard very controversial reports on this subject. For example, take an SVD with a 690mm barrel vs an AK47 with a 455mm barrel, with both guns having correctly matched cylinders and...
1-17 of 18 Results
Top