Good Morning All,
I'm in the process of upgrading my AAC T11 with a new barrel and Bucking.
I'm awaiting Skirmshop to ship the below list of products (darn Bank Holiday weekends).
I've gone for my usual trust MR Hop from my Maruzen Type 96 days, although 70 Degree instead of my usual preferred...
Are there suggestions for currently available (in the US) barrel/bucking combos for the VFC M40A5? Love mine, but looking to do some tinkering to improve the accuracy and haven't seen many options available for replacement barrels.
Im in a middle of a sniper build at the moment and I have a strange hop up thing, the nub is a mr hop (maple leaf) the hop up chamber is stock so i can not put a nub yet (im gonna put a omega nub inside) but the trigger system is a springer custom works s-trigger (very satisfied with it) and the...
Hi! Can you tell me about best barrels money can buy?
For most people i think EDGI is "best" solution. I think about custom lapped barrel. Is it worth it? What it gives me?
I have Action Army AAC T10, Wolverine Bolt, Action Army VSR Hop-up Chamber, Maple Leaf Crazy Jet VSR 428mm, Maple Leaf...
I found something very interesting in a facebook group. A new brand from Germany produces airsoft barrels that are looking pretty neat.
Hardened stainless steel and better tolerances than Edgi for about the same price.
Large Hopup window, perfect for R-hop.
No special extra porting...
First of all, it's "source", not "cylinder"- some of us are HPAholes :yup:
Is there convincing evidence that the "ideal" (creates the most muzzle energy- adjusting barrel length causes reduction) source/barrel volume ratio also creates the most accurate/precise trajectory...
It's nothing huge, and I know my barrel isn't the first to employ this general idea, but BMR mentioned not seeing this mod before I made a casual post about it in the Facebook group.
So here's what I'm talking about:
I asked- scratch that, I sent ghetto MS Paint pictures of what I wanted to...
Hi friends! some time ago I bought a laylax barrel 6.03, to improve my m28, which has a stock gun 6.05 that gave me good results of grouping with the PDI W bucking, after changing the barrel for one laylax along with a rubber maple leaf decepticon, the results .... they were not so great in the...
About half a year ago i decided to build my own JG bar-10 Gspec with the Wolverine Bolt+Wraith after getting advice here on the forum. Since i'm using Co2 cartridges i'm looking for more efficiency. Currently im running the following setup:
JG Bar-10 Gspec
AA hopup unit
I would like to ask your help to find the problem in my G&G GR25 that does not have enough range.
The stock barrel had a hard scratch so had to be replaced.
In the meantime also wanted to tune up to our field limits: 500FPS (0.2g)
So changed the spring and the barrel only:
Recently i've finished building my rifle. Buying parts and was really long and hard proces as almost everythin i bought was broken in some way...
So i decided to go with EdGi parts to eliminate the factory overlook.
That's the list of my parts:
- EdGi 6.00 435mm bull barrel
- EdGi Cylinder and...
as the topic says, let us know what Barrel length you are using in your rifle/rifles?
I am more interested in tuning barrels, not the stock ones.
I need the statistic and it would be great if you can vote.
finding it hard to find the right barrel I had a mad bull 6.01mm barrel and that was shockingly bad, I then changed to a modify 6.01 hybrid barrel and the accuracy is just as bad I have tried it with aa hop up rubber and I have a aa hop up chamber.
I really don't know what to do as a barrel to...
i have read many posts and guides about upgrading vsr-10. I have completed bar 10 with airsoftpro upgrades. Last thing i need to upgrade is stock barrel. I need something available in my place and for decent price. Basically i have two options:
1) Poseidon air cushion 6,05 mm barrel...
So recently I got my JG Bar 10. The problem is that the barrel I also got is too wide and an AEG barrel. I know that I can mod my hopup but I don't want it so that I can't use normal VSR 10 barrels with it, so instead I decided to return it. The problem though now is that I can't find any good...
I am getting a Prometheus 6.05 barrel for my JG Vsr-10 but the problem I'm having is that the thing has 6.05mm diameter of space (which is above average for tightbores) but the main thing is that it is 433mm long even though my normal VSR-10 barrel is 430mm long and so I'm wondering if that will...
I'm from England and I'm looking to get an MB-01 to get into sniping.
I have done A LOT of forum lurking and research and this forum has been seriously helpful so thank you. I have all the things ready for DIY mods to do initially once I get the MB-01, teflon tape for threads...
I've been struggling for a while with the accuracy of my VSR-10 PRO.
After checking out the barrel today I found out that it wasn't even straight even though I got it new from the store.
So right now I have to buy a new one and I was wondering which barrel is the best to use...
Hi, so I have the Laylax/Prometheus barrel (6.03, 433mm).
The problem is that it's not VSR cut and I want to use the ML Decepticons buckings for my rifle.
So in the picture below..
..is this how should I modify the barrel? should I also create the "circle" around or will just shaving off the...