Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Maruzen Rifles
    Recently, on my AW .308, a pin that locks the bolt handle in place when it is in the up position flew out under the tension of the spring behind it. I can't figure out how to put it back in so that it will stay in place; the spring seems to be way too long. No matter how much I try to push in...
  2. General Sniper Talk
    Hello everyone. What is the best way to find out what cylinder and bolt is compatible with a Specna Arms SA-S03? As far as I'm aware the only things in the rifle that aren't compatible with the VSR10 are the Cylinder Head, Hop Up Chamber and Magazine. But I tried a Novritsch SSG10 bolt and it...
  3. Novritsch Platforms
    Hello. I have had problems with my SSG10 ever since I dissasembled the stock and cylinder to clean and relube the components around the cylinder. (NOTE: I didn't touch the hop up chamber, nor the trigger box). The problem is when I have pulled the bolt back and then return it down to the firing...
  4. Others
    Hey everyone. I'm new to airsoft and sniping. I bought a new Echo1 M28 Sniper and I was having no problem with it until the third day. I was shooting at targets until I went to cock the bolt back like I normally do but the bolt would not lock back to load the next BB. Is the problem normal...
  5. HPA Systems
    I got a Wolverine BoltM for my Well Mb03 (Vsr10)..... I Saw the video tutorial for install, etc. But some times my gun Stop Fire, and lock the bolt ! I cant push or pull the bolt and many times the air start to leak out ..... Anyone knows what is Wrong and how to fix ?
  6. VSR Rifles
    Howdy everyone! Building a JG Bar-10 G-spec up and had a quick question about the wraith c02, it looks like it will take my amped regulator but wanted to see if anyone has tried that before i order it! Build list if anyone's interested. JG VSR-10 G-Spec 120$ Action Army Hop chamber 54$ Maple...
  7. Bolt Action
    Tank CI: 8 Tank start PSI: 3000 Tank end PSI: ~500 Bolt source PSI: 160 Bolt air-saver PSI tune: 80 (original silver spring, no shims) Actual shots ([shots measured = 496]/2+?): >248 (context/explanation below) AMENDED TO 359 (context in third edit) Variables skewing data towards efficiency...
  8. Novritsch Platforms
    Hello I have experienced an issue while playing with the SSG24. When I load the chamber and pull the bolt, for some reason the safety jumps on. If anybody has had this problem and solved, I would love to know. Thanks in advance.
  9. Bolt Action
    My god doing this was annoying. Anyway, I'd like to share the way I did it. Preface Who doesn't love the M40 style rifle? The Wolverine Bolt is a pretty cool upgrade, but it has some inherent problems when installing in a Modelworks M40A5 stock. Mainly, the pistol grip of the stock is solid...
  10. For Sale
    For sale an Ares DSR-1 version 2 The gun shoots now at 7 degree's Celsius 400 fps .. It was shooting around 500 in summer. I've skirmished it a couple times the past few months. It has a 6.04 stock inner barrel. It can be swapped as it uses an AEG type barrel. Both 23 rnd mags don't leak...
  11. VSR Rifles
    I have the black ASPUK cylinder and the finish is pretty rough. I want to improve the bolt pull so I do not have to rely on silicone grease. I have a dremel with all types of polishing attachments and some wire wool. Before I start I was wonder if anyone could give me some pointers to save me...
  12. Bolt Action
    People make mistakes, I'm not angry, but my BOLT was missing an o-ring entirely. I tested its seal with my mouth before ever even hooking it up, and was a tad disappointed- turns out I was missing an o-ring... Wolverine provides a nice little guide...
  13. VSR Rifles
    My action army parts almost appear to be non compatible with eachother. On my TM vsr10 my cylinder does not go all the way in and seems to get "stuck" in the hop up chamber. The chamber should be correctly fitted and I even tried removing the BB holders. The bolt pull also feels rather heavy...
  14. Bolt Action
    Hi, I'm Jaws from Team Danger Zone. We're involved with beta testing the new Wolverine Bolt. I figured I would offer to answer questions to the best of my ability and also post up some test results. If anyone wants to know anything, please post here and I will do my best to answer. Full...
  15. VSR Rifles
    Hello guys, I recently gave in and bought a tm vsr 10 from redwolf airsoft. Got it in the mail today and while it's a great gun that shoots very straight, one thing about it bothers me.. On the way back, the left side of the cocking handle seems to "scratch" onto the part that stops it at the...
  16. Maruzen Rifles
    Hi guys so my mb01's bolt handle is starting to wobble a bit and it's kinda annoying...anyone had any experience in fixing this issue?
  17. VSR Rifles
    I have an agm vsr10 and I have been doing tech work on aegs for years so now want to try upgrading bolt acion rifles. I've had my agm vsr10 for awhile but never used it more than shooting in the yard. So what upgrades can or should I get, what do they do, and where do they go? I don't have that...
  18. Others
    My mb01 has started to slam the bolt forward whenever i pull it back. A friend told me to get a new trigger box so I bought a new metal trigger box and it still does it. Any thoughts?
  19. Others
    Hi I already used the search bar and found some posts but I haven't found any that has the same problem with mine. If anyone knows a thread that involves the exact same problem I have PLEASE link me it. After purchasing my MB01 L96 it finally came in and I used it. I ran into one of the worst...
  20. General Sniper Talk
    I have two scopes, one with a bigger lense (great for sniping) and one with a lense about the size of a quarter. The bigger one is missing a bolt and won't stay on my rifle right, and the smaller one has both of its bolts and stays on just fine but it is too hard to look through when I have my...
1-20 of 26 Results
Top