Airsoft Sniper Forum banner

bucking

  1. VSR Rifles
    lately I've got lots of problems with my vsr the consistency is everywhere and I have the issue where the bb curves after about 150-200ft. I think it is the barrel or myb the bucking but i hear the hop up chamber can be the problem also. Soon i will make an order for the new 6.01 barrel and a...
  2. VSR Rifles
    Howdy everyone! So I am new to the AA hop up chamber, I just got mine installed with a Decepticon Blue bucking and wowza, probably the most noticeable upgrade I've done. It works fantastic! But, I just wanted to ask you knowledgeable folks if there is any common issues with the AA hop up...
  3. Rifles & Parts Reviews
    Hi friends!, on youtube there's no so much vídeos on it until i found this, if any of you has experiences please share!. The fist vídeo is the decepticon bucking alone and the seconds vídeo it's decepticon and autobot
  4. VSR Rifles
    Hi there!, after instaling a 500 mm 6.03 laylax inner barrel to the stock chamber and the PDI bucking, the BBS are a litle inaccurate, so i thought: the bucking is worn out, then i instal the lonex Vsr black bucking, the surprice was when i shoot it looks like spitting the BBS trough the barrel...
  5. VSR Rifles
    Hi, i have the PDI W bucking on my rifle, when i install it gave me 1 1\5 seconds of air seal...then for over a month i didn't use the rifle, then when i shoot again with it the air seal is gone, i didn't change anything inside (dissasembly), i don't have silicon oil and i think the bucking is...
  6. L96 Rifles
    Hey everyone, long story short, I'm hoping my stock hop up chamber in my L96 (including attempted R-hop and stock bucking) are the causes of inaccuracy and I am finally going to replace it. My gun is incredibly inconsistent (even compared to its stock form) and the only thing stock left on the...
  7. Rifles & Parts Reviews
    I'm getting a JG-BAR 10 from EVIKE.com and I'm going to put a lot of upgrades on it. I don't know which nub to put on it though. I've never bothered upgrading it on any of my other Sniper Rifles so I have no idea how to find the right one. Also, does the "Bucking Degree" have to be the same as...
  8. Others
    Hi guys, today arrived to me two buckings, the PDI W hold vsr, and the lonex air seal(the black one), I tested the lonex first and when i do the first shoot the bb didn't go out the barrel, it get stuck inside the bucking, so i changed for the PDI bucking and then shoots again very good!. Why...
  9. Others
    SHS Special Type Hop Up Bucking for Marui VSR-10 / L96 Sniper Gun (70 Degree) HUSHS05. SHS Hop Up Bucking for Marui VSR-10 Sniper Gun (Red, 70 Degree) HUSHS06. SHS Hop Up Bucking for Marui VSR-10 / L96 Sniper Gun (70 Degree) HUSHS15. There's a difference except for the colors? I need updated...
  10. Others
    Hi, guys on the web there's is a types of buckings for vsr's, ones said gbb bucking rubber and others said only bucking rubber, the two of them are ver bucking but i don't know if there's is a difference between them, can I use a gbb bucking on a spring sniper?. Another thing, do you think if I...
  11. General Sniper Talk
    Hi guys, i bought new JJ hop up chamber for my BAR-10 and i am not getting enough hop with 0.30g bbs and AEG normal nub 70° bucking. Hop up arms are all the way down and it's still not enough. What should i do? Pls help me guys.
  12. Others
    Hi, i install the nineball con my m28 hopping for a better performance but the first shoots were horrible, then a little better, i tested with .28 first and then with .20 the BBS fall's down on 30 meters with zero hop up, and that's weir because the stock bucking has better hop with .20 flying...
  13. VSR Rifles
    Mates, i always read the forum and now i have a question. I ordered an AA Hopup Chamber, a Maple Leaf Decepticons Bucking 70 degree and a 6.03 AA 430mm barrel to drop in my TM VSR. However, i didnt order the ML concave nub (which seems like the most common combo) and i cant buy it separately...
  14. General Sniper Talk
    What is the best bucking on the market??? I've seen two major brands (correct me if I'm wrong) maple leaf and Prometheus. Which one is better? I shoot in all different seasons so I need something that can last in extreme heat and cold. I don't particularly mind having to get a new bucking every...
  15. General Sniper Talk
    In the context of the Action Army VSR-10 chamber and Wolverine BOLT nozzle, regarding physical fit (un-tested). Macaron with ring: 75 degree, brand new Macaron without ring: 50 degree, brand new Monster: ? degree (TBA), brand new Nine Ball: ? degree, ? years old I was tuning my rifle yesterday...
  16. VSR Rifles
    Wuzup ASF, :cheers: As some may know, im from Portugal, and here the fps limit is 374fps, I tunned my rifle to 365 +-2 fps with 0.20g. I had before 470 fps because I only played fields where I knew the org. Anyways, with this 470fps I had a maple leaf 70 degree Monster, since now Im with a much...
  17. General Sniper Talk
    Just saying. Long story short: I was considering which bucking to use as air seal for an R-hop, and immediately thought of Maple Leaf's new Autobot/Decepticon buckings which have a nice little nozzle-seal aide. I was a little concerned about inverting their bucking as the design would certainly...
  18. VSR Rifles
    EdGi vsr10, necessary DIY mods? Good morning, Noob here. I just recently played my first game with my G&P m4a1, and while it's a great gun I think the role of a sniper would suit me better. Airsoft games here are a little "slower" than I was expecting (camping). But it's still fun. Realistic I...
  19. Others
    Hi, I have a few questions about upgrading my SW M24, as i'm kinda new to the game. i already installed a pdi cilinder set + spring and a new sear set. but i still need an inner barrel Hop-up chamber and bucking. but i can't seem to find out the lenght of the inner barrel. Can someone tell me...
  20. Maruzen Rifles
    Hi guys,it's me again with some dumb questions. What barrel do you guys recommend?(i've been thinking a madbull black python v2 509mm) What bucking and nub do you recommend?(had a maple leaf 75° in mind with a maple leaf nub) These are the last upgrades for my l96,though these are the ones that...
Top