Airsoft Sniper Forum banner

build

  1. VSR Rifles
    Im in a middle of a sniper build at the moment and I have a strange hop up thing, the nub is a mr hop (maple leaf) the hop up chamber is stock so i can not put a nub yet (im gonna put a omega nub inside) but the trigger system is a springer custom works s-trigger (very satisfied with it) and the...
  2. General Sniper Talk
    In 2 weeks im gonna be ordering these parts and making a vsr build and posting all the steps and results as I go here so if you have any suggestions and/or help it will be highly appreciated platform: JG367S -good vsr10 platform with a nice scope and a suppressor i can later change spring...
  3. VSR Rifles
    The Quest for the Quiet Sniper Rifle (Non-HPA)(JB Bar 10 G-spec) Jordan Stumpf This project/quest began when I realized that although my heavily upgraded JG bar 10 shooting at 613fps on .2 and 423 fps on .46s can reach out quite far and very accurately, its loud(side note I don't normally...
  4. VSR Rifles
    So this is the setup I'm running at the moment, please comment on any improvements that I could make or anything wrong. Cheers. Gun: Bar 10 Mods: Crazy Jet 6.04 or Action Army 6.03 inner barrel (advice on which one please) Maple leaf 60* autobot bucking Maple leaf omega nub Action army...
  5. VSR Rifles
    Hello all I've been thinking recently of what would be the ultimate 1J rifle in terms of parts and performance. Feel free to post any parts suggestions or mods that you feel would be appropriate for this build. I've been thinking: Base rifle : JG BAR 10 Barrel : EDGI or ML CJ Trigger box and...
  6. VSR Rifles
    Hi guys first post, I am looking to start a build on a TM VSR GSPEC. I have identified the following components, can someone confirm that there are no issues with this list and that I have not missed anything? Rifle: TM VSR-10 GSPEC Hopup Chamber: Action Army Hopup Bucking: Maple Leaf Bucking...
  7. VSR Rifles
    Hello guys! Dark here... So, I've been playing Airsoft for a little over a year now and I'm still just as in love as I was when I first played. Like most people, i started out playing with an AEG (G&G Predator) but I've now decided to venture in long range sniping. I have enough knowledge that...
  8. New Member Introductions & Tips
    As stated above I'm Andy and from the Netherlands. Quite new to airsoft and still looking to buy my first own rifle. I was planning on buying a DMR or building one myself (upgrading a from a base) I came across this deal EMG Seekins Precision Licensed AR-15 SP223 Advanced Airsoft M4 AEG Rifle...
  9. VSR Rifles
    Hello airsofters, I am hoping to begin upgrading a jg bar 10 (vsr 10 replica) as my base gun. The only problem is that the only field that i live close to has a fps limit of 450 for spring rifles. Therefore, i need help to make an upgrade build that is awesome without going over the limit. The...
  10. VSR Rifles
    Greetings, as per my intro post I've hit a snag with my build and need a hand.. Please bear with me I'll try and list everything properly. base rifle:spr a5m madbull sniper Red 60 bucking AA hop unit 6.04 430mm kn head (I think) vsr barrel aa Teflon piston airsoft pro trigger v4 airsoft...
  11. VSR Rifles
    Hi everyone. I am planning on building my first Vsr and hope you guys could give me some feedback on this build. Thank you in advance =) Base- echo 1 psr (jp-88) Aa hop up chamber Aa zero trigger with blue 90 degree piston Maple leaf autobot 70 bucking Aa m150 spring Aa 6.01 x 430mm barrel Aa...
  12. VSR Rifles
    VSR-10 Build on a Budget AirsoftPro parts What is the right amount of money to spend to have a great bolt action rifle? A rifle that lasts much and does not cause problems to each game? Note that this is a personal Review/Build of a cheap VSR with AirsoftPro parts. My intention is to give tips...
  13. VSR Rifles
    Hi All Had a look around and there is a lot of knowledge between all members, so I wanted to put my thoughts down for my next project, I play at a CQB site, and I have been playing sniper for a few months. I used to play many years ago, but due to a back problem I was not able to continue...
  14. VSR Rifles
    Vsr-10 Pro Build Suggestions for parts Note: Subject to changes and updates This thread previously was a tease for AC part build I was JK just messing around Requirements: Vsr 10 platform Fire .2 at 500 fps (Field requirements) Quiet as possible Accurate Possible types Mancraft hpa setup...
  15. VSR Rifles
    (I speak french, please excuse my spelling and syntax) Hello to all of you guys, Today I am starting my very first build thread. This is going to be on a very common rifle, the jg bar-10 gspec (clone of the TM vsr-10 gspec). The reason why I am writing this is pretty simple: I want to...
  16. VSR Rifles
    I think i've finally decided on what im going to do for my TM Vsr-10 G-spec. Just want to know your guys' imput and make sure it all works together. Thanks everyone :) Trigger System: Laylax Zero Trigger with Piston, Or AA Zero with piston Cylinder: Laylax Pss10 teflon cylinder Cylinder Head...
  17. VSR Rifles
    Mission: To build a general use rifle, fairly stealthy, and with 300 ft Range with .40g bb Tokyo Marui VSR 10 Pro Sniper Laylax Spring Guide Laylax Cylinder Head Laylax Dampers Laylax Teflon Cylinder Action Army Z Trigger Laylax 550 FPS Spring PDI Hop Up Chamber Prometheus 430mm 6.03 inner...
  18. Others
    Dear Mods: Oh dear, my first post seems to be in the wrong forum. Can this live here or how do I move it to "Project Guns?" So in Japan I need my rifle to fire at or less than 0.98 Joules muzzle energy. It seems that this is one of the major things that keeps the sniper population here pretty...
  19. Longrange AEGs
    Hey! I'm sorta new here. Been more of a lurker really. I would like to maybe hear some opinions/Criticism about a build im currently working on! Goal: A 450 FPS rifle, as quiet, accurate, consistent and as good trigger response as possible! Base gun: A VFC SR15 (Yeah I Know, a 5.56 :S)...
  20. General Sniper Talk
    Hello everybody, I'm new to sniping and am contemplating a hpa build. The issue I have is the field I usually play at has a 400fps limit. if I were to use something like a ninja lpr would I be able to adjust it to shoot at or below 400? Any info is appreciated, thanks.
Top