Airsoft Sniper Forum banner
custom
1-18 of 24 Results
  1. VSR Rifles
    SO! One day I was thinking,"HUH. What if you BUY the most EXPENSIVE parts possible, then just SLAP them on, and how would they COMPARE to a BUDGET build?" So, I made a BUILD sheet, and HERE it is!! VSR 10 Project Item Cost Maple Leaf Hop Up Arm...
  2. General Sniper Talk
    I recently bought this headache of a gun because of the benifits of it being semi-customized. I’ve had multiple problems that I still haven’t fixed (like it not being VSR-10 spring compatible even though it was advertised as such), not being able to find information on the inner barrel and what...
  3. General Sniper Talk
    Hi, I'm not sure if I'm putting this in the right section but I wondered if anyone may be able to help. I placed an order with MK23 Custom in Spain for the SVD banana (I'm pretty sure that's the technical term for it) and after taking my payment, he has not replied to any of my emails &...
  4. VSR Rifles
    I'm considering cutting my inner barrel with either a hacksaw or plumbers pipe cutter then sanding any burs off. Is this achievable and practical?
  5. General Sniper Talk
    Is this an established notion? My (any?) rifle is heavier than it needs to be when you consider the actual functional parts creating a BB-propelling system. To think that all I need is my scope, hop-up chamber, barrel, trigger assembly, bolt, and magazine [and accompanying parts] to fire a BB...
  6. Wanted
    Hi all, I don't know if this is the right place or if this is allowed (please let me know) but I am looking for a smokeys vsr stock if anyone has one that theyd sell or knows someone taht might sell theirs please let me know thanks :)
  7. VSR Rifles
    Vsr-10 Pro Build Suggestions for parts Note: Subject to changes and updates This thread previously was a tease for AC part build I was JK just messing around Requirements: Vsr 10 platform Fire .2 at 500 fps (Field requirements) Quiet as possible Accurate Possible types Mancraft hpa setup...
  8. Non-Sniper For Sale
    This is my Custom sr-16. It comes with 2 high-cap magazines, a lipo, and the Magpul furniture shown in the pictures. It has a Prowin hop-up unit with a new barrel and bucking. I believe the barrel is 6.03. Its lipo ready and has only been used on the field once, fps is rated for cqb. Please PM...
  9. Project Guns
    Guys, just want to share some DIY stuff that could be useful. Using only simple stuff such as Plastic paper Clip Board, some bondo and paint. Quite easy actually but turns out Preety nice. The pictures below preety much explain everything. But just a bit explanation, to cut the plastic board...
  10. VSR Rifles
    With this barrel, could you theoretically ER-hop a VSR-10 and use an AEG barrel? If you read the comments they say that it does not fit TM VSR 10s, would they fit the BAR-10? Does anyone have any experience with these? Here is the part: Angel Custom Ultimate CNC Hopup Chamber for VSR-10 Airsoft...
  11. General Sniper Talk
    Now to business: I have a design for an incredibly simple HPA system (basic blow back with a heavy bolt) & I want to build a 1 joule DMR around that & the principles of design behind the VSS (a compact, integrally suppressed rifle using very heavy ammunition) as the areas I currently play in...
  12. Concealment
    Ok, for a while now I have been trying very hard to start an airsoft painting service. Well, I am overjoyed to announce that my dream has come true! From last October to today, I have completed multiple other painting jobs, all turning out extremely well. I have also amassed many camouflage...
  13. Others
    I've been trying to get rid of a Blaser for like a month now, and I'm starting to want to hang on to it and make it a project gun. Question is: what parts do I need to make it compete with other rifles? Normally, if it was a more common platform, this wouldn't be a problem. But because it's such...
  14. Project Guns
    Its quite a time when I started to think about this rifle. Its young rifle. So I started to model it in 3D. They just looking for a final design of rifle , so I redraw my model every-time when they make some modification. They don't make much significant changes in last time. I hope its right...
  15. For Sale
    WTS custom Tokyo Marui VSR-10 ($300 and fully upgraded! Need to Fix my Car!) This is a tokyo marui VSR-10 with a ton of upgrades; I rarely used it. The only thing that is stock on this gun is the stock itself, and hop up. If you were to build this gun's current setup would cost slightly over...
  16. For Sale
    I AM NOW PARTING THIS OUT!!!! FEEL FREE TO TEAR THIS TO SHREDS!!!!!! It is a vsr platform, it has the pdi hard cylinder set, a polarstar spring guide, an m-trigger, the airsoftgi short engineers rail, a king arms 3.5-10X40 non illuminated scope, pdi hop up, a pdi reciever, a pdi bull barrel...
  17. Non-Sniper For Sale
    3 month rule requirement not met.. READ THE RULES..
  18. For Sale
    Images, more upon request... Tokyo Marui CUSTOM M40A2 (VSR-10) - Imgur This is a custom Tokyo Marui VSR-10 that has a genuine Bell & Carlson M40A2 stock that was modified to fit the VSR-10 system. It has been fully upgraded internally with everything except a teflon cylinder. The upgrades...
1-18 of 24 Results
Top