Airsoft Sniper Forum banner
fps
1-16 of 16 Results
  1. VSR Rifles
    Hi all, Long time lurker first time poster. So I've recently upgraded my CYMA 701b with the following parts: Maple leaf crazy jet 428mm AA chamber ML Autobot 60 Panthera nub AA cylinder AA cylinder head AA blue piston AA spring guide AA M130 spring AA zero trigger My local site has a...
  2. General Sniper Talk
    my field chronos snipers to 450 fps but you can use any weight BB to chrono. i have an upgraded bar-10, which spring and bb weight combo should i use for maximum range? i currently have 130 and 170 springs. would a 170 and very heavy bb's (0.48+) work for under 450 fps? cheers
  3. Others
    Hi all, I recently had my SPR chrono'd at my local site and it shot 523fps using a 0.2 (site limit is 500fps). The mods are as follows: AA teflon cylinder AA 45deg piston AA M150 AA steel sears/spring guide stopper PPS ball bearing spring guide Prommy 6.03, 433mm ML delta bucking, 80deg...
  4. VSR Rifles
    Hey guys, so I bought a m130 and m150 spring from Action Army and when I chrono'd the m130 at my local field it got an average of about 498fps which seemed quite high for the rating. The fps was consistent so I guess that means I'm getting good compression but I doubt I would get that fps even...
  5. General Sniper Talk
    I placed 5 washers behind the spring guide shortening the spring (or I think this is called pre-loading?) I haven't found any info on this type of mod. I have a chrono that is super consistent and it read 10-12 higher per washer. Went from 440-446 to 488-490. Anyone tried this? I use a Lancer...
  6. VSR Rifles
    Hi everyone I've just decided to mod my VSR and after reading a lot of posts here I have found the Cylinder Barrel Ratio one. My country limit is 330 Fps (1J here in Italy), I feel like I can use BBs as light as 0.32g to 0.43g BBs for my rifle in order for me to stay under the limit and not to...
  7. VSR Rifles
    Wuzup ASF, :cheers: As some may know, im from Portugal, and here the fps limit is 374fps, I tunned my rifle to 365 +-2 fps with 0.20g. I had before 470 fps because I only played fields where I knew the org. Anyways, with this 470fps I had a maple leaf 70 degree Monster, since now Im with a much...
  8. General Sniper Talk
    if a sniper is at 450-500 fps with .2 bbs does the fps drop with heavier bbs? what are some good brands of bbs?(getting .40) Is matrix a good brand?
  9. Others
    Hi, I've recently bought an Ares spring L96 (Yes I know there are downsides to that particular toy) and upgraded the cylinder and trigger group to PDI. I've installed the strongest PDI Ares L96 spring that PDI sells, which is their 140 spring. I installed the washer that came with the kit. I'm...
  10. General Sniper Talk
    im not findong much on if it is possible to raise the fps on a green gas sniper. socan you or can you not? im thinking bout buying the dsr-1 from 6mm proshop but says shoots 350-380fps.. id like 450 or 500? i kno the ares dsr shot like 500 using green gas also so how is it ares got it to shoot...
  11. VSR Rifles
    This is my Jg bar-10 upgrade list. I'd like to hear from u guys what u think. Any suggestions are welcome! First of all my budget is around 600$ And since the limits are 500fps I need an sniper under 500 fps. Jg bar-10 98$ Jing Gong BAR-10 Bolt Action Airsoft Sniper (JG-366) Action Army...
  12. General Sniper Talk
    UPDATE: This Problem is a defect in the Angel Custom Neo Hop-up unit itself, caused by a non-properly seated O-ring, which will catch the BB and cause it to Leave the barrel at a substantially lower FPS, jam, or even break. The only solution as of right now is to just reach in with some long...
  13. The Lounge
    Ok, I realize that one of the rules is no talking about fight club, or anything 550+ fps, but why is that? (the second one, not the first) I took a trip to hawaii, and brought my vsr with me to look at the airsoft shops. When I talked to the shop owners, they said there were no fps limits in...
  14. General Sniper Talk
    I've read through the forum about this subject and found a couple things but not much that helps. I just recently bought a few upgrades for my ares aw338 and before I install them I wanted to test the average fps. Everything on the gun is original. I've had the gun for about 1 year and haven't...
  15. General Sniper Talk
    Is there any advantage to using longer inner barrels (with correctly matched cylinders, of course). I've heard very controversial reports on this subject. For example, take an SVD with a 690mm barrel vs an AK47 with a 455mm barrel, with both guns having correctly matched cylinders and...
  16. Maruzen Rifles
    Well im new to the sniper world and am learning as i go. I need help building the best L96 Maruzen spring rifle which i define as great distance and accuracy. I need help building the list of all the parts i need which i have an idea of what i need for the most part but would like experienced...
1-16 of 16 Results
Top