Hello, I am missing a small piece for my Mp5k. It goes on the bottom of the gearbox shell, and allows everything to bolt to the lower. Here is a pic! Please message me if you have one that you could hook me up with. Will consider boneyard mp5s too!! PayPal ready!!
I'm getting back into airsoft after 8 years or so. I recently got a CYMA M14 EBR and I have had an issue with midcap magazines not feeding correctly or really at all. I figured it was the mags and returned them and ordered new ones. I tore into the gearbox and put in a M140 spring, aluminum air...
So I have a friend who has a Cyma AK, and it's got some problems. Specifically, it does not fire if you pull the trigger too quickly, it works if you pull it slow in semi, but it's pretty iffy in automatic.
By "pull the trigger too quickly" I do not mean rapid-firing while in semi-auto...
Okay so I am trying to upgrade to a 140 spring but for some reason I just can't get it to work. It works fine with the stock spring but on my last attempt I got the gearbox to get one shot off until it locked up and when the trigger is pulled all you hear is a "clink clink" noise. I haven't the...
Hey there, I am about to take on a long and painfull journey of turning a G&G Combat Machine CQB into a DMR.
This is what I plan for the gearbox:
lonex cylinder head
lonex spring (m100)
lonex airseal nossle
lonex POM piston head
shs 14 touth piston
shs spring guide
Mods I am...
I have the aim top v2 gearbox and I am taking it apart to put in bushings and reshim. When I put the bushings in with no shims and a gear and close the gearbox, there is no side to side wobble at all because the bushings stick up higher. And the gear doesn't spin at all. But it works fine with...
So I opened up my gearbox to do a few mods and upgrades and saw this.(look at pic)
So does this mean I don't need to do the AOE mod because the teeth are touching as much as they possibly can. And the piston is pushed in all the way