Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. Type96
    Hello I have a problem with my L96 the bolt stucks and its hard tu push back. For a couple of days it started to have this problem. I can pull the bolt with no problem (100 m/s spring) but when I push the bolt back I struggle a lot. I already change the trigger box for it
  2. General Sniper Talk
    Does it affect performance or can I still use it(autobot silicone)
  3. General Sniper Talk
    Hello everyone! First of all, thank you for taking the time to read all this, thank you very much! The reason for this post is because I want to upgrade my sniper and I would like to know your opinion. I have a Saigo Kyudo Defense 04. I have already made some upgrades like: change the internal...
  4. General Sniper Talk
    So my buddies ssg-10 is only shooting around 340 fps on .2g bb. The cylinder has perfect air seal, he took the hopup apart and cleaned it, didn't help. If I put his components into my vsr, it shoots 480 fps so I don't see how it could be the spring or any cylinder component. He was getting like...
  5. Others
    I have a well mb06 i bought on Taiwangun and upgraded it with their suggested upgrade Kit. https://www.taiwangun.com/sniper-rifle-spring/mb06-black-well https://www.taiwangun.com/inner-sniper-rifle-parts/upgrade-set-for-mb01-mb05-mb06-and-mb08-well I had the gun disassembled for a long time...
  6. Sidearms, Optics, Gear, and Accessories
    So I just recently got into airsoft and sniping. I have had an Sig M17 for a couple years before I started. When I started playing I got two brand new green gas mags. I can’t get it to feed half the time, and when I can, it will only get 3-4 shots before it runs out of gas. As such I am getting...
  7. Others
    Hello there. I recently bought an S&T Kar98K, and I was wondering what parts are compatible with it. It uses S&T M1903 mags and uses a hex screw for hop up adjustment instead of a slider. Most parts I've seen in upgrade kits are for Kars that use a drop-free mag and the slider hop up adjustment...
  8. VSR Rifles
    Hey hey there good people! ~ Here's little info before I get into build details: I've been reading through forums, guides and anywhere that I could get as much info possible on VSR-10 builds, but I've got plenty more questions, becouse all those builds are limited by the joule rules of their...
  9. General Sniper Talk
    A few months ago, I created a discussion detailing my non-firing issue with my A&K SVD. It turned out to be the trigger contacts and I got it fixed by an airsoft mechanic. The cause for the issue was that I was firing in semi way too fast and it couldn't keep up. Now it has happened again, but...
  10. General Sniper Talk
    Okay let me start off by saying my fully upgraded jg bar 10 with tridos tdc hopup suddenly started shooting like crap. For the longest time the gun shot straight as an arrow, now everytime I shoot it the bb plummets like a brick after about 50 feet when 2 weeks ago I could shoot up to 250 feet...
  11. General Sniper Talk
    Just got my kar98 yesterday and i was wondering if there were any spring upgrades available as i was unable to find any online. or are there any compatible spring upgrades for other guns?
  12. VSR Rifles
    Anyone have the newer aa hop up chamber with the adjustment arm like the original? My vsr is fully built and I can dial in the arm and get decent enough hop to be able to shoot to 100m+, but after like 10 shots the accuracy is all over the place and I have readjust the arm. Not sure if the...
  13. General Sniper Talk
    after i installed both the aa chamber and the masada arm i have had very bad accuracy and the bb would go either to the left, down, right, or right on target. My barrel is clean and have had no problems with my ML chamber so a little bit disappointed after all the hype of the aa chamber and the...
  14. General Sniper Talk
    I was firing my new svd for just a few minutes when the trigger stopped responding. There was no sounds that indicated that anything broke, it just stopped. My battery didn't die, as it had just come off of the charger, I also tried another battery, but to no avail. I'm new to AK type guns, and...
  15. VSR Rifles
    Hi all, I am new to here and airsoft in general, but not rifles in general if that makes sense. So I apologise for any social faux pas in advance! OK, so I bought a second hand TM VSR 10 which has the following parts installed (thats what the advert said I I have been able to verify some of...
  16. General Sniper Talk
    Its my bday on the 12th and i want to get an airsoft sniper. Ive been looking at these two-https://www.bespokeairsoft.co.uk/double-eagle-m61-vsr-10-sniper-rifle-blue and -https://www.bespokeairsoft.co.uk/double-eagle-m62-m40a3-sniper-rifle-blue. Are these good? and if not can someone reccomend...
  17. General Sniper Talk
    Hello, I’m working on a random chop shop project and I need a 14mm negative (ccw) adapter that has a portion being ~22-23mm in diameter. If anyone happens to have this Striker adapter by Action Army, I’d love to know what it reads if you mic it here. Typically I go off of pictures, order parts...
  18. General Sniper Talk
    Hi there, I was wondering if anyone could shed any light on the topic. My Well MB08A magazine latch broke so I bought a Well L96 replacement latch. When trying to fit it in place I can’t get it to work, I was wondering if anyone has any experience with this?? Or has any ideas.
  19. L96 Rifles
    Ok so Me and my last 2 brain cells are crying rn trying to make my Cyma l96 AKA CM 703 shoot. The problem is (see video) that the charging handle won’t go back to where I cocked it from. The trigger removed the cylinder just glides through the receiver, once I screw the trigger on, cock it, it...
  20. New Member Introductions & Tips
    Hello, im new to airsoft sniping and i purchased a well mb01 to snipe with. I was test firing it and it began to make a spring twang sound. Im not used to airsoft snipers so im not sure if a twang sound is normal or not. I took the rifle apart after I heard it but everything looked fine to me...
1-20 of 24 Results
Top