Airsoft Sniper Forum banner
help me!
1-20 of 31 Results
  1. VSR Rifles
    Transitioning from a DMR style aeg to a sniper and was wandering it a sniper that fires 530fps with .12s and 470fps with .20s be under 450 FPS(my site limit) with .28 or .30 or would something heavier be better? Would this be too slow for mid to long range engagements (just out of aeg range)?
  2. VSR Rifles
    Hello everyone, brand new too the forum but have a troubling issue. i used my brand new 'Well MB07 VSR11' today at my field. the discription says that when tested with 0.2 bb's it got a good 470 FPS. now obviously im not going to use point 2's in my rifle, and all the lads who are more...
  3. General Sniper Talk
    hi all totally new and this is my first post i have been searching around the site and have found tonnes upon tonnes of sound info so thanks for all of that.... going through lockdown and planning a vsr 10 build i can basically strip a vsr 10 and know what parts i want to put in before i have...
  4. Others
    Hi guys! I first got into air soft sniping because I found a cheap, broken sniper and wanted to repair it. These are the images and after some research I found these parts which I think I would need to repair and or upgrade. https://www.evike.com/products/41859/...
  5. New Member Introductions & Tips
    Hi My name is Luis Im from Guatemala, Im 19 and I just started in the Airsoft business... I've bought an ASG m15a4 rifle...but the outer barrel keeps falling, it just pops out, any idea why is that, or is there a pin that keeps it from falling?
  6. General Sniper Talk
    I am semi new to airsoft (around 2 years playing) and I've been looking at either buying the SSG24 or the Silverback SRS. I am having trouble deciding which is better and am looking for advice on which one to go for. SSG24 Pros: It can shoot pretty far and is accurate out of the box. It is...
  7. Semi-Auto
    I recently purchased a Mancraft PDiK brand new. Yesterday I slapped it into my VFC Scar-L. I ran a few .12g Co2 canisters through it. (Being that's all I have access to within about 200 miles, other than Co2 tank fills.) Today I did the same thing; however, at the 4th canister POOFT. Something...
  8. General Sniper Talk
    Hi there, Recently I acquired a ASP OTs-03. After initial testing, its a great gun and all, but I'm am unhappy about the grouping. Around 75 feet the grouping is around 1"! :nuts: What are some upgrades I could do to improve the grouping? I am less concerned about the range, just want to...
  9. General Sniper Talk
    Hi, thank you for reading my post. I recently bought an ASP Ots-03 for use as an average performance DMR, nothing special. So of course after testing to make sure it works, I dropped in a Maple Leaf red hopup bucking, a Maple Leaf "flat hop" nub, and a Madbull 650mm 6.03 Black Python...
  10. New Member Introductions & Tips
    Hello the name is DMan and I'm glad to be part of this community. I have just purchased a Tokyo Marui AWS L96 with upgrades coming along the way. I already submitted an essay of my first thread questions. Please take a look at it as I didn't want to bombard this new member thread as my first...
  11. Bolt Action
    yesterday i bought a mancraft SDiK and i accidentally bought the SDiK for the 90 degree trigger even though i dont have a 90 degree trigger. can someone please tell me if it matters? and if it is possible to get them to change the item in my order?
  12. Bolt Action
    I am interested in buying a mancraft SDiK and i was wondering if you are able to make shots at least 250 feet? Beacause right now i do have a pretty sufficient spring system and i would like to get the mancraft because of it being quiter, shorter bolt pull, achieving high fps without killing...
  13. AWS/AW338
    Hello everyone! I was wondering if I could put any spring in the TM l96. I've heard a little bit of both, but have no clue. Also can I upgrade just the sear or do I have to upgrade the whole trigger unit? One more. What will getting a new cylinder and piston do for me? Thanks for helping!
  14. Longrange AEGs
    Hello all, I am building a DMR and have a few questions: 1. Joule Creep: I want as much as possible and from my understanding I need a short barrel (247mm) and a volumed cylinder (full) and I need to use heavy bbs (.43g). Am I correct or is the barrel too short? 2. Hop Up: Chamber: Lonex...
  15. General Sniper Talk
    Hello Snipers! I am looking to buy my first Sniper Rifle i have played alot of games with my friends M24 Snow Wolf and it keeps breaking, now im looking for my own one.. I am looking at a Tokyo Marui VSR-10 Pro Sniper Rifle as its pretty much fully upgradable and i have seen its pretty popular...
  16. VSR Rifles
    So I have decided to buy a JG Bar 10, i understand most upgrades but I am interested in the Angel Custom parts offered on Evike. I will most likely being purchasing the following parts from AC and would like some input if people have actually used these and compared them to other brands... AC...
  17. General Sniper Talk
    Ive always loved snipers so when i started checking out airsoft i imediately had to have a sniper and ive had some christmas money saved for something like this, ive done alot of investigating and i like the jg bar 10 but i wanna make sure im getting what i want so could i get some suggestions...
  18. Longrange AEGs
    Okay so I am trying to upgrade to a 140 spring but for some reason I just can't get it to work. It works fine with the stock spring but on my last attempt I got the gearbox to get one shot off until it locked up and when the trigger is pulled all you hear is a "clink clink" noise. I haven't the...
  19. Concealment
    Hello fellow Snipers/Marksmen. I would love to have some advice on building a ghillie suit. I made an attachment to what i would like it to look like, But more coverage on it. It needs to have ample concealment and still be mobile. I live in Texas and it can get hot sometimes so venting...
  20. Others
    Hello fellow Snipers/Marksmen, I would like to know the best way of modding a JG Bar-10 G-spec. I have read other threads and they are confusing, Having someone with experience using a JG Bar-10 G-spec (Tokyo Marui or Jing Gong) reply to this would be very helpful. I would like to know the...
1-20 of 31 Results
Top