Airsoft Sniper Forum banner
hop up
1-20 of 47 Results
  1. General Sniper Talk
    I know… classic VSR10 right curve. I’ve read 40 million posts about VSR10’s inherently having the “right curve curse”. Well I just recently purchased a Maple Leaf MLC338 Deluxe Edition. It shoots amazing and I was reaching out to targets at 200 feet no problem. Well today i threw in a 170 SP...
  2. General Sniper Talk
    Hello guys! I ordered a SRS A2 16´ with a silverback m170 and a Maxx Model Hop Up chamber SRE around 1month ago and finally is arriving. I bought a maple leaf super macaron bucking and recently saw in my local store the Silver Back Flat hop-up Rubber 70° (yellow) with a nub. Should i buy the...
  3. General Sniper Talk
    What are the differences between the degrees in the hop up (50° 60° 70° ecc) in termes of: bb weight? range? Power in Joule lost when hop up is activated? I don't know if this question was already done but I've not found anything regarding this so I asked, hope that is the right section.
  4. VSR Rifles
    Hello guys, MYTM Vsr-10 features full PDI Parts, here is the List: PDI Bore Up Cylinder KIT PDI V-Trigger Unit PDI V2 Hop Up Chamber PDI 430mm AEG Barrel And a standard round tensioner, cause the Maple Leaf tensioners are to small for the Hop Up Levers from the PDI Chamber (EPeS HopUp...
  5. VSR Rifles
    i have the tm vsr 10 and so far and im looking to upgrade a few parts. i have found the ACTION ARMY D01-024 VSR-10 6.01 Precision Inner Barrel 430mm, Action Army Hop Unit VSR-10 and the Maple Leaf MR Hop Up Bucking 70°, will these all fit together? I already have the action army trigger set and...
  6. Silverback
    Hi there, good evening, I have bought my SRS A2 Covert a few weeks ago. I have tested it, out of the box, just to get my own feeling about it, and then I changed the spring a couple of times (to a PDI 500, and right now with a Silverback M160). A few days ago, I decided to go with the hop up...
  7. Rifles & Parts Reviews
    Hello, I'm looking to upgrade my hop up chamber on my stock JG Bar 10 Pro. I'm from Europe and airsoftpro is the nearest and cheapest store to my country and distributors here often offer 10% off on all products. My question: Is this chamber good and what AEG barrel and bucking should I buy...
  8. VSR Rifles
    Im in a middle of a sniper build at the moment and I have a strange hop up thing, the nub is a mr hop (maple leaf) the hop up chamber is stock so i can not put a nub yet (im gonna put a omega nub inside) but the trigger system is a springer custom works s-trigger (very satisfied with it) and the...
  9. VSR Rifles
    Hello, during dissasembling my vsr10 , I lost my hop up Nub :doh::doh: I am running a PDI Hop Up Chamber and i dont know which nub i can use as a fitting replacement... Thanks for any help!
  10. Others
    So recently I got my Bar10 set up with an R-hop, after a few weeks, It started shooting over-hopped even when I've set the hop zero. someone told me that it is hooking and I have to tdc it but i kind of want to make the gun as clean as I can and still use the knob on the side. can anyone tell me...
  11. Longrange AEGs
    Hello, i have an "out of the box" condition A&K SVD AEG and after a few games with it ive come to realize that yes, the blue factory hop up is absolute garbage. i have a few questions regarding the hopup, as i am also a new player to airsoft and everything that has to do with the guts of the...
  12. VSR Rifles
    Hey fellow snipers, I'm new at this forum as I'm snipping and I'm loving it! (I always played with AEG's until one month ago) I bought a Well MB-03 last week and had to switch the spring to a weak one because here in Portugal our limit is the 374fps/1.3j. I've changed the bucking too. The...
  13. General Sniper Talk
    Hi!, do you know in some way how to fix well the hop-up chamberl to the outer barrel? the hop up chamber and the outer barrel are fixed by a little tiny screw and it get loose somtimes and the hop chamber wobbles, ruining my accuracy. Please don't said thread lock the screw Btw it's a m28 rifle
  14. VSR Rifles
    Hi, i have the PDI W bucking on my rifle, when i install it gave me 1 1\5 seconds of air seal...then for over a month i didn't use the rifle, then when i shoot again with it the air seal is gone, i didn't change anything inside (dissasembly), i don't have silicon oil and i think the bucking is...
  15. General Sniper Talk
    Hi guys, i bought new JJ hop up chamber for my BAR-10 and i am not getting enough hop with 0.30g bbs and AEG normal nub 70° bucking. Hop up arms are all the way down and it's still not enough. What should i do? Pls help me guys.
  16. Others
    Hello! first time posting so i'm sorry if i make some mistakes. I got my MB10 last week and i'm planning to upgrade it. I already have a replacement for all the internals EXCEPT the Hop Up chamber. Doing some research (in this forum as well as some googling) i found that the inner diameter of...
  17. L96 Rifles
    Ok, I bought the Action Army Hop up unit for my L96 UTG based on other review it seemed like a good upgrade. I also purchased the AEG Maple Leaf 70deg bucking, and nub as well as a AEG Prometheus 6.03 barrel. I was getting 480fps with 0.25 bbs with the stock HU unit, and madbull 6.03...
  18. VSR Rifles
    I'll start by saying I'm not the most experienced airsoft sniper, after buying my VSR10 G-Spec I straight away started looking into upgrading it. I've so far replaced the spring and switched to a madbull reinforced hop bucking to deal with the extra FPS. The issue I'm having is that after taking...
  19. Others
    Hey y'all! I own a JG BAR-10 and a Shadow Ops L-96. My sister a while back broke my BAR-10 by dropping the gun barrel side down.:nuts: Part of the hop up mechanism broke and I have never been able to figure out the name of the part. Can someone tell me what it's called? Thanks and God bless...
  20. VSR Rifles
    I took my VSR to a skirmish today and I had trouble right from the start. It started to jam every few shots while I was trying to set the hop, and eventually it jammed every shot. The only time this happened previously was when I tried 0.40 bbs and it jammed so often that I decided to go with...
1-20 of 47 Results
Top