Airsoft Sniper Forum banner
l96
1-19 of 104 Results
Advanced
  1. L96 Rifles
    How do I take off the orange tip for the AW .308? I tried everything from dipping the tip in hot water to heating it up with a fire. The orange tip got so hot that it started to melt and i still could not twist it off.. someone help please
  2. L96 Rifles
    Ok so Me and my last 2 brain cells are crying rn trying to make my Cyma l96 AKA CM 703 shoot. The problem is (see video) that the charging handle won’t go back to where I cocked it from. The trigger removed the cylinder just glides through the receiver, once I screw the trigger on, cock it, it...
  3. General Sniper Talk
    Hello I just got this gun as a gift: https://www.evike.com/products/62784 So I’m not in on this with any money so far, but I was wondering what parts does this thing even take? I’ve seen some people say that it’s a Marui clone so it can take those bits, and I’ve seen others say that it’s a...
  4. VSR Rifles
    Hello, maybe somebody can help me. Short introduction from my side, I'm a doctor in mechanical engineering, worked years as a mechanical designer, I'm not so often on Airsoft-events, but I like shooting with these replicas and want to have them as accurate and precise on long distances as...
  5. Type96
    Hello guys, (TL;DR in the bottom) I joined the airsoft sniper community a few months ago, and got myself the Well MB08. I chose the 08 model because I found a good deal with some metal internal upgrades ootb. Now as I'm gradually leaning more into it, I want to drop some more upgrades, however...
  6. General Sniper Talk
    Hello, I posted not too long ago but have researched a bit more. I still had a couple questions that I didn't really find a full answer for. I am looking to get a base sniper with good externals (Decent quality, good design, adjustable stock.) and have been looking at the APS2 L96's, since...
  7. L96 Rifles
    Hello guys, I've been using the ASG aw .308 for some time now and i am looking to update the internals but can't seem to figure out if the MB01 parts are the same. Everywhere i read the information is different some say it is the same some say it isn't. Would like to update the trigger/hopup/...
  8. L96 Rifles
    Just a warning, I'm a noob so I might need clarification on some things :/ I just got a WELL MB08D and it's double feeding. first thing I tried was shortening the spring in the mag. I reduced it by ~20 coils. Still double feeding. I tried pushing the mag in when it tilts out (common...
  9. L96 Rifles
    Hello! I have a severe problem with JJ-Airsoft L96 trigger on Well MB01 I´m building. All works fine with stock trigger but with JJ trigger the piston won´t lock. Yeah I know, dont buy cheap stuff but the customer wanted it... The pistonsear seems to be about 1,5mm further back than on...
  10. L96 Rifles
    Alrighty then, So i'm completely new to this forum and relatively new to airsoft sniping and airsoft in general. I usually play a lot of CQB running my 1911 but recently started playing a lot more outdoors and after renting a Well L96 i had to get myself one and thus had my new Cyma 703 thrust...
  11. VSR Rifles
    Hi, i would like to buy a m140 spring for my rifle, But the m140 spring doesn't seems to be arround today, and the l96 has it, i wondering of the l96 sprnigs can fit inside the vsr10
  12. L96 Rifles
    I just got a tm aws and I want to r hop it, but I don’t know what’s compatible, Can anybody give me links two parts so I could r hop this myself. And tell me that parts I will need. And what parts I can use to get higher fps. I’ve seen guides but I just can’t seem to find the parts that I know...
  13. L96 Rifles
    I've done as much searching as I can bare. I've come to you guys to see if you can help. I have an AGM L96 (450fps @ .20) and the field I'm looking to play on allows a max of 400fps with .20 bbs. Can anyone recommend a spring that I can put in this sucker to lower it to meet the chrono? Thanks...
  14. Type96
    The original plastic stock for the mb04 is rather cheap, easily bendable and squeaks. So, does anyone know if you can get an "upgraded" one?
  15. Type96
    Hi all, I've just got myself a Well MB0X L96 (Not entirely sure which version), last game day with it was really fun but I've found it to be inaccurate at longer ranges. I've done a load of research into different hopups, I've settled on the Airlab Air-hop or just some silicon hose stuff, but...
  16. L96 Rifles
    A friend recently got me a Double Eagle Shadow Ops Type 96 as a sniper. (He doesn't know much about airsoft) I figured it should be upgradable due to the fact that it's a clone of the WELL MK96. However, I also heard a ton of things about the gun not being upgradable. I'm pretty confused now so...
  17. L96 Rifles
    Hey everyone, long story short, I'm hoping my stock hop up chamber in my L96 (including attempted R-hop and stock bucking) are the causes of inaccuracy and I am finally going to replace it. My gun is incredibly inconsistent (even compared to its stock form) and the only thing stock left on the...
  18. Type96
    Hey guys, I haven't purchased my rifle yet, and to be honest, i still hesitate between the BAR-10 and the WELL MB01C. I am new to BASRs and this is my rather low budget WELL MB01C upgrade theorycrafting list. Action army Hop up Chamber...
  19. L96 Rifles
    Hello! I have a WELL MB4401 L96 AWP. I need my gun to stay below 400 fps with .20g BBs. I am also trying to improve the accuracy and precision of my gun. Would the following parts help this (I have attached the links to each of the parts)? - Laylax PSS2 110sp Spring for APS2 / Type 96 (Must...
1-19 of 104 Results
Top