Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. VSR Rifles
    Hi, I have a problem with my Maple Leaf VSR. When I pull the bolt all the way back it sometimes "locks" the piston but I cant push the cylinder back. Also sometimes the the piston wont lock at all. The sear in the triggerbox does move freely. What I noticed, when I remove the stock and push the...
  2. General Sniper Talk
    Hi. I saw this post on FB. I'd like to know what you guys think of this: "Just sharing these 2 MLC338 MLC 338 and 338 Gspec Maximizing them with the stock spring. Mlc 338 shooting 400fps@.48g With autobot 50° bucking and 65grams piston and 23mm airbrake Mlc 338 gspec shooting 375fps@.48g With...
  3. For Sale
    Up for sale is a used hopup chamber and inner barrel for a Vsr-10. $115 shipped in the US for what you see. The hopup chamber is the tried and true Action Army CNC chamber. Few scratches on the face, does not affect operation. The inner barrel is and older EdGi brass inner bull barrel. It’s...
    $115 USD
  4. VSR Rifles
    Hey everyone this is my first vsr build as a newbie to sniping, its shooting accurately and chronoing consistently at around 520fps with .20s on full hop and 480fps on low hop. Just wondering if thats a good and normal fps for this type of build :) Build list: -Maple leaf 90° zero trigger set...
  5. Rifles & Parts Reviews
    Hi. I finally got my first VSR, my SSR10. Made by a Taiwanese manufacturer named Slong. I planned to buy AAC T11 + edgi kit but it is not available so I tried this one. It has all steel parts (45 degree trigger set, hop chamber, twisted barrel, 450 mm 6.03 mm inner, zero resist, 14 ccw thread...
  6. General Sniper Talk
    This normal looking hop rubber with a concave design is the included rubber in the vsr 10 i plan to buy. I would like to know what are your thoughts on this design? Here are the full specs •MAPLE LEAF S2 TACTICAL FOLDING STOCK •MOE GRIP •6 WAY ADJUSTABLE CHEEK RISER INTERCHANGABLE LEFT OR...
  7. VSR Rifles
    Has anyone recently used one of the Modify X-Range buckings? Seeing if anyone has compared to one of the highly recommended Maple Leaf Autobot 70° setups. I remember reading not so good things about the older tan Modify bucking.
  8. General Sniper Talk
    Hey guys, Seeing if a vet can help me out with this one. I have a 90 degree zero trigger in my Maple Leaf MLC338. After installing an M165 maple leaf spring, the trigger sear was not engaging and locking the piston back. When I take the stock off of the receiver it cocks back and the sear...
  9. General Sniper Talk
    I know… classic VSR10 right curve. I’ve read 40 million posts about VSR10’s inherently having the “right curve curse”. Well I just recently purchased a Maple Leaf MLC338 Deluxe Edition. It shoots amazing and I was reaching out to targets at 200 feet no problem. Well today i threw in a 170 SP...
  10. General Sniper Talk
    What are the differences between the degrees in the hop up (50° 60° 70° ecc) in termes of: bb weight? range? Power in Joule lost when hop up is activated? I don't know if this question was already done but I've not found anything regarding this so I asked, hope that is the right section.
  11. General Sniper Talk
    Hello guys! I´m buying a maple leaf autobot with an AA hop up chamber + ml omega nub. What Degree should i pick? My sniper is around 2.8j with 0.45 560 - 550 fps with 0.2 Thanks!
  12. General Sniper Talk
    Hi Guys, My name is Paul and i am new to airsoftsniping. I bought a 3 month old upgraded Well Mb 03 for 230€ from a friend - i think ist a good deal... I like the gun, everything works nice and smooth and it shoots straight. The only issue i noticed is the Hitbox at About 60 Meter, the hits...
  13. General Sniper Talk
    Hi! Can you tell me about best barrels money can buy? For most people i think EDGI is "best" solution. I think about custom lapped barrel. Is it worth it? What it gives me? I have Action Army AAC T10, Wolverine Bolt, Action Army VSR Hop-up Chamber, Maple Leaf Crazy Jet VSR 428mm, Maple Leaf...
  14. VSR Rifles
    Hello! This is my first post and I hope I'm not breaking any rules. I apologize before hand if this has been covered in another thread, I couldn't find anything pertaining to it though through my searches. (maybe I was just using the wrong keywords) I'll be looking into getting a 90* trigger...
  15. General Sniper Talk
    Hello, Does anyone know if the maple leaf VSR receiver works with the AA bull barrel? I'm looking to buy the AA 300mm twisted outer barrel if and only if it works with the maple leaf VSR receiver. Any information is greatly appreciated!! Cameron
  16. General Sniper Talk
    Clickbait title to get all those ML CJ yay-sayers in here :hehe: I just want to hear from those who stand by them, detailed descriptions of what it is that convinced you: What changed between the two builds you're comparing? Were both platforms using the same BBs? What sample size are we...
  17. General Sniper Talk
    So we all know the VSR-10 is made of my step-dad's inability to see airsoft as a serious sport, and of course the magazines follow suit- boasting a worth of a whopping eight dollars. Well out of the three I own - JG, WELL, Tokyo Marui - the Tokyo Marui is the only one that doesn't suffer...well...
  18. Rifles & Parts Reviews
    Hi friends!, on youtube there's no so much vídeos on it until i found this, if any of you has experiences please share!. The fist vídeo is the decepticon bucking alone and the seconds vídeo it's decepticon and autobot
  19. VSR Rifles
    I have a Bar10, So Im just wondering what is the use of Maple Leaf's I-key that comes with the Maple leaf hoparm. What is its function?? Do I still need a hop tensioner or the hop nub?? Whats the difference between the hop nub and I-key? im really confused. thankyou!
  20. L96 Rifles
    Hey! i have owned a l96 mb01 for a year now and i have managed to fully upgrade it. I have upgraded basically all parts and im hitting enemy players every 1.2 shots, maximum range i have hit with single shot is 110m, but usually i dont go over 90m, which is basically maximum for that rifle List...
1-20 of 31 Results
Top