Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 49 Results
  1. For Sale
    Title says it. I have a stainless PDI inner barrel up for grabs. It’s 375mm long with a 6.01 bore. Very slight use, under 1k shots. It’s in great shape, like new and ready to drop in. $75 shipped in the US, free patch if you want one.
  2. VSR Rifles
    Hello guys, MYTM Vsr-10 features full PDI Parts, here is the List: PDI Bore Up Cylinder KIT PDI V-Trigger Unit PDI V2 Hop Up Chamber PDI 430mm AEG Barrel And a standard round tensioner, cause the Maple Leaf tensioners are to small for the Hop Up Levers from the PDI Chamber (EPeS HopUp...
  3. VSR Rifles
    Hi Everyone! This is my first post here as I am a new member here and I'm hoping someone here can answer a question for me that I can't seem to find the answer to myself. I built a JG BAR-10 a few years back when I was younger (AKA my brother told me what to buy and did it for me) and the...
  4. Wanted
    Hey guys, I am searching for the PDI Bore Up Cylinder rings, because I cant find them online (everywhere out of stock). These are the searched ones: https://www.fire-support.co.uk/product/pdi-bore-up-cylinder-ring-for-marui-vsr-10 If anybody has these, I would buy them :) Greetings from...
  5. VSR Rifles
    Hello, during dissasembling my vsr10 , I lost my hop up Nub :doh::doh: I am running a PDI Hop Up Chamber and i dont know which nub i can use as a fitting replacement... Thanks for any help!
  6. VSR Rifles
    Hello, i am running a PDI BoreUp Cylinder with a PDI Hop Up Chamber, but i am unsure which barrel would be the best for this setup. I´ve read that, because of the cylinder volume of the bore up, i should use a inner barrel above 500mm - so i found a PDI 6.08 500mm inner barrel , would that...
  7. VSR Rifles
    Hello , i have a small problem with my TM Vsr-10.... i am running a PDI Bore Up Cylinder with the original TM receiver and my Bolt Pull is not very smooth. I already read that the combination does not fit very well, so I edited the receiver a little bit, but its still not smooth. Then I found...
  8. Rifles & Parts Reviews
    Hey, today I broke my second PDI Hard Piston. Don't know what I did wrong, but the material seems to be just too weak. Now I want to buy a proper aluminium one from another brand. Unfortunetly, from what I heard, PDI cylinders seem to be too slim for any other pistons and a bit of work is...
  9. General Sniper Talk
    Has anyone ever done this, and more importantly, succeeded? It is this PDI end cap: PDI VSR-10 End Cap I know that you can just buy the AA end cap to go with the AA cylinder, which is what I already have. I am just curious as to whether anyone has successfully put the PDI end cap on the AA...
  10. For Sale
    Hello, I'm selling the original PDI manufactured M24 sniper rifle. The receiver is marked as number 53. The inside has all availiable PDI M24 parts. The receiver is realsteel H-S precision m700 stock that has been milled to airsoft use. The receiver is onepiece solid. So it doesn't have the...
  11. VSR Rifles
    Hey all, Couldn't find a similar issue on the forums so wanted to post up this issue to see if anyone has experienced it before. I recently disassembled my VSR-10 for cleaning and when re-assembling I'm having issues getting the piston back into the cylinder (super weird). It looks as...
  12. VSR Rifles
    I ordered PDI barrel 495mm rather than 303mm for my JG VSR-10 G-Spec. (PDI 01 6.01mm Precision barrel for TYPE96 495mm (PDI Chamber Required) - Buy airsoft Accessories online from RedWolf Airsoft) I have PDI HopUP chamber...
  13. General Sniper Talk
    I recently bought this headache of a gun because of the benifits of it being semi-customized. I’ve had multiple problems that I still haven’t fixed (like it not being VSR-10 spring compatible even though it was advertised as such), not being able to find information on the inner barrel and what...
  14. Others
    Hi guys, today arrived to me two buckings, the PDI W hold vsr, and the lonex air seal(the black one), I tested the lonex first and when i do the first shoot the bb didn't go out the barrel, it get stuck inside the bucking, so i changed for the PDI bucking and then shoots again very good!. Why...
  15. General Sniper Talk
    The parts are as follows: High power stainless steel cylinder withstands the use of high power upgrades. Designed by PDI, shoots at 400fps Full metal aluminum alloy barrel, trigger, and bolt assembly... ...and a 90 degree seer from what i heard, but is there anything that needs a upgrade in the...
  16. VSR Rifles
    Hello, since I will be in japan for the next few months so I decidet to get some parts from X-Fire to completely upgrade my VSR 10. I read almost everything about upgrading it in this forum here and just want some experienced members to check out my shopping list and optimize it. I bought the...
  17. The Lounge
    So since PDI is having a halloween sale and a shipping sale i decided to go and buy a full type 96 hard set off of X-fire. I've received an email from them telling me that they need my license but i don't have one. Is it likely to be stopped at U.K. customs?
  18. General Sniper Talk
    Hello fellow snipers! I need a bit of help with the Ares MS338. I bought it from redwolf airsoft and it came with a quite decent cylinder, aluminium piston and spring guide and a 90 degree trigger. My main problem is the trigger. The dang thing is getting used up quite quick and im searching...
  19. Type96
    Hi all, I've been looking at upgrading my inner barrel for my MB-01 but have a few questions as I'm not really sure I'm understanding all of the info. My understanding so far is that there are essentially two types I can go for, AEG (which I believe would require a new hop chamber and bucking?)...
1-19 of 49 Results
Top