Search Results for ‘piston’

Note: This issue has been solved, look further below for the TL;DR/Explanation. Hello So, my platform is the Well MB08, which came with Well's full metal trigger box and cylinder internals. I've just bought the airsoftpro type96 trigger box, the action army teflon cylinder, and the guarder...

Hello, I have a well mb03 and I'm trying to put a steel cylinder and spring guide in it. I have an upgraded 45 degree sear kit and the piston is for a 45 degree sear. I've used multiple springs and everytime I pull the bolt, it catches but won't rack forward without extreme force, it won't...

Hi, Im working on a self design piston for a sniper rifle, but, I was thinking on using this aliexpress o-ring with a special shape. But I need some advices before I buy it. This kind of seal ring Will work for the piston?, Or should I stick with the normal O-rings?. Keep on mind that this...

So I have a Scout, I'm looking for a hush quite piston to install. Has anyone found one that works?

Hi. I recently changed my spring. It's a maple leaf m165 spring rated at 630 fps but I will add weight to slow it down. My previous spring is an M135 and the piston is an oring piston. When I use that spring, my piston makes a slapping sound. Are there ways to reduce the sound except for sorbo...

Guys, my e1m28 was being dead for 3 years inside it's bag , until now!. I has already the JJ-airsoft PDI zero trigger clone on it But I never could make it work because I don't have a propper 90 degree piston, so what I did is just take the stock 45 degree piston and carved in to a 90 degree...

Hi folks! Any one knows the dimentions (lenght and diameter) of this kind of cylinder/ piston? APS2 / Type96 / APS SR2 (MB06) / M99 SW / M24 SW / M24 CA???? This is the link of the product Kit Dark APS2 / Type96 / APS SR2 (MB06) / M99 SW / M24 SW / M24 CA

Hey, today I broke my second PDI Hard Piston. Don't know what I did wrong, but the material seems to be just too weak. Now I want to buy a proper aluminium one from another brand. Unfortunetly, from what I heard, PDI cylinders seem to be too slim for any other pistons and a bit of work is...

Hey all, Couldn't find a similar issue on the forums so wanted to post up this issue to see if anyone has experienced it before. I recently disassembled my VSR-10 for cleaning and when re-assembling I'm having issues getting the piston back into the cylinder (super weird). It looks as...

Hi all, i was very kindly sent springer custom works' new piston and spring guide to review and after playing at Alpha 55s summer social weekend here's what i had to say. First impressions - The piston and spring guide look stunning, a real piece of art. They look really well made. Features -...

Hi!, i think to buy the new echo1 m28 kit, it's made of aluminum: the piston and the spring guide, but is in 45 degrees, you believe that if I modify the piston in a lathe to a 90 degree, it works well? Or will I just ruin it? Or it has to be a steel 90 degree end piston?

Please advise, I have an EdGi cylinder and cylinder head in my VSR, along with his 45/55° piston .. and I want to eventually change it to a 90° setup. My question is: is it possible to put a different piston from another manufacturer (e.g. AA) into this cylinder? ..and if yes, what are the...

So im going to try to explain this the best i can... basically i have a action army cylinder and an orange action army piston. however, the air seal is really poor which I belive is really effecting my consistancy. (from holding my thumb over the cylinder head and shooting). Im 99% sure its to...

Hi, i really need the dimensions of the piston, the length and diameter. First look at this web : https://shop.ehobbyasia.com/cyma-piston-set-for-cyma-m24-cm705-c140-1.html looks like the m28 piston , but i need the dimensions. If someone have this rifle can measure the piston , or corroborate...

Salutations friends. I’m relatively new here, but not an entire stranger. I’ve used this for information prior to purchasing my latest toy, the Well Mb03d which is the pro spec (correct me if I’m wrong). I’ve read millions of times that the sears and piston wear out rather quickly. I’ve sent...

Hi, guys on the web there's is a types of buckings for vsr's, ones said gbb bucking rubber and others said only bucking rubber, the two of them are ver bucking but i don't know if there's is a difference between them, can I use a gbb bucking on a spring sniper?. Another thing, do you think if I...

Hello guys, first time posting here (always hesitated to enter these forums since a lot of people seem to be experts, but decided to finally join the forums) , so please forgive me if I make some mistakes. First of all, after some time saving money, I've got enough to buy upgrades for my vsr10...

Does anyone tried to put a Shooter alu piston into an A&K gearbox? Were there any compatibility issues? How does it slide in the box? (Tight? Too much loose? Alu vs potmetal sliding smoothness, etc.) I've got (quality) doubts about alu pistons especially those, which made by such a low end...

I have this ASGI piston laying around and I'm wondering if it's still good to use, or worth just replacing with something else. Also, is it a 45 degree or 90 degree one? I'm a noob don't know how to tell. I'm going to buy a zero trigger soon for my TM VSR anyway, and most come with another...

Hello,can somebody answer me how long will last Well MB03 sniper rifle with stock spring and steel 45 degree sears and aluminium piston... I know 45 degree sears are not that good,and 90 degree is better option,but if i use 450-470 FPS stock spring and steel sears from SHS how much rounds i can...