Airsoft Sniper Forum banner
shimming
1-3 of 3 Results
  1. VSR Rifles
    Surfing on YT I found an interesting video, here it is: Starting from this idea I thought: "Why not shimming the entire receiver too?" So the purpose of this MOD is to make the cycling more sturdy and solid, centering the cylinder perfectly into the hop up chamber and preventing dirt comes...
  2. Longrange AEGs
    I recieved the gun and noticed the stock was loose, so I tightened it. I then checked all other screws and did the same. One of these screws was the motor shim. I let the gun sit for about 4 hours while charging a battery and tried to fire it. It didn't shoot. I then tried another battery...
  3. Longrange AEGs
    I have the aim top v2 gearbox and I am taking it apart to put in bushings and reshim. When I put the bushings in with no shims and a gear and close the gearbox, there is no side to side wobble at all because the bushings stick up higher. And the gear doesn't spin at all. But it works fine with...
1-3 of 3 Results
Top