Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Sniper Talk
    I just have all of my JG Bar10 G-spec trigger parts and cylinder upgraded with edgi and was installed by edgi last 08/17 but suddenly last 08/21 it jammed and suddenly starts to slam fire, i was able to remove the jam but it still continues to slamfire, any thing i could do to fix this?
  2. VSR Rifles
    So i recently got this Vsr to stop slam firing by putting in a new steel pps piston sear into the trigger box. Suddenly at a game it starts slam firing. When i pull the bolt all the way the way back expecting a click there is no click and it slams forward is this because the piston sear is not...
  3. General Sniper Talk
    Hi everybody. New to the forums and came here for some help. About a year ago I wanted to get into airsoft. Therefore, I bought myself a M59 sniper rifle by BBTac. I got this from Amazon (stupid, I know). I wanted to upgrade it, and I didn't have a proper site to buy upgrades so I went back...
  4. General Sniper Talk
    After about 50 shots out of the box, my new BAR10 started to slam fire. I had a TSD SD700 vsr10 imitation/clone (the very same one that had the bolt not going forward problem so I replaced the new spring guide stopper from the BAR10 with my...
1-4 of 4 Results