Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 44 Results
  1. Silverback
    Hello everyone, I recently got myself an A2 Sport and have good access to Novri springs and Novri springs only locally. Rest of the brands are not so accesible(shipping+wait times). I saw that Rapax f.e advertises their springs as "it will fit any 13mm; SRS, SSG, VSR etc." but didn't see...
  2. AWS/AW338
    So I have been having issues with the action army AWS M150 spring. I got 3 from all different stores (Evike, Airsoft Atlanta, and Action Army USA ). They all shrink after first round. I don't have this issue on m130 but seems like I'm not the only one. It seems like their spring hasn't got...
  3. VSR Rifles
    I've got a perfect airseal and my hop is adjusted for .46g but I still find my fps jumping around by like 10-15 higher or lower with an average sitting at 2.25j but at times it can jump to 2.34j which is over the limit. I was wondering if springs can affect fps? My cylinder is only lightly oiled...
  4. General Sniper Talk
    I've just noticed that a spring of about 150 m/s is made both for aeg and for vsr. There are any differences? If they have the same m/s should don't have the same power?
  5. VSR Rifles
    Hello, Been running my VSR10 (pro model) the past couple of years and now looking to upgrade the Cylinder/Piston/Spring to something different. From my research so far and availability of parts I’ve narrowed it down to the following… Piston: Stalker Scorpion or SCW Cylinder: Laylax PSS10...
  6. General Sniper Talk
    I'm new here so take it easy on me :) I recently bought a new stronger spring for my sniper. Obviously the bolt pull is going to be tougher. But what I wasn't expecting was the push to change. It's not difficult to push in, but it is noticeably more resistant. The spring I put in was about a...
  7. Silverback
    Hey guys! I recently got an SRS Silverback, but with the 500 FPS spring it has installed, its a PAIN to pull back all the way to chamber a round (pull bolt). What's the most difficult for me has been the last centimeter or two of pull right before the bolt locks out and goes smooth. Someone...
  8. VSR Rifles
    Hi, i would like to buy a m140 spring for my rifle, But the m140 spring doesn't seems to be arround today, and the l96 has it, i wondering of the l96 sprnigs can fit inside the vsr10
  9. VSR Rifles
    Hi, how many fps a laylax spring will lose after it worn out?
  10. Others
    Hello!, my m28 has lose it's power, the stock spring is a m140, then i try a laylax m150, but does'nt work well, 10 shots and start to slam fire and the cylinnder deforms a little arround the cylinder head. Now i can't found a m140 spring, the only is the maple leaf m145 and the other is a m140...
  11. General Sniper Talk
    Heyo, A quick overview: I read a lot threads in this forum. Mostly the guides for the Vsr-10 and Type 96 builds. Now I need your experience!:tup: 600€ is my limit (Why? -> 4.) 1. My first Problem I'm from germany, so there are some guns, i can't buy here. 2. Spring or Co2 First i thought i...
  12. VSR Rifles
    Hey guys, so I bought a m130 and m150 spring from Action Army and when I chrono'd the m130 at my local field it got an average of about 498fps which seemed quite high for the rating. The fps was consistent so I guess that means I'm getting good compression but I doubt I would get that fps even...
  13. Others
    Hi, on eBay I found this kind of springs, they offer any kind of OD, ID and aire diameter. What do you think about it? It will work on a sniper rifle, maybe?... 2pcs Compression Pressure Spring Wire Dia. 0.3mm-2.0mm OD 2mm-35mm Length 300mm | eBay
  14. Others
    Hello. I upgraded my Cyma 702 with Airsoftpro M24 HopUp Chamber gen2, Hybrid piston http://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-cyma-sws-m24/hybridni-pist-pro-pusku-cyma-cm.702-detail Steel Cylinder 7 / 9mm Steel Rotation Bearing Spring Guide...
  15. General Sniper Talk
    The parts are as follows: High power stainless steel cylinder withstands the use of high power upgrades. Designed by PDI, shoots at 400fps Full metal aluminum alloy barrel, trigger, and bolt assembly... ...and a 90 degree seer from what i heard, but is there anything that needs a upgrade in the...
  16. General Sniper Talk
    If I want to shoot near 3j with 0.4g bbs what type of spirng should I use? (13mm APS SPRING) Barrel is 6.03mm 578mm edgy :^D Thanks for answers! Artyfood
  17. General Sniper Talk
    hi guys, im troubled about the spring, i buy a spring but it dint fit in the cylinder, im searching about what spring do its fits for my mb04 i found someone in a page that a m150-m170 spring should fit he says, is that true? or i need a guide what spring do i use for my mb04, please someone...
  18. VSR Rifles
    Hi everyone I've just decided to mod my VSR and after reading a lot of posts here I have found the Cylinder Barrel Ratio one. My country limit is 330 Fps (1J here in Italy), I feel like I can use BBs as light as 0.32g to 0.43g BBs for my rifle in order for me to stay under the limit and not to...
  19. VSR Rifles
    I recently bought a HFC vsr 10 from Justbbguns, i bought the 330 fps one since it was legal for my site (350 is the limit) but when i chrono it was 375 fps! can anyone help me find a spring that will shoot below 350 fps?!? Thanks:)
  20. VSR Rifles
    I recently switched my vsr 10 to an hpa system, but i am not too happy with it. the reson i switched to hpa was because of how easy the bolt was to pull back and still get a high fps. When i was running spring I had an m150, an AA hopup chamber, guide, piston, and cylinder kit, and 6.03 barrel...
1-20 of 44 Results
Top