Search Results for ‘tech help’

hello everyone, I need help about upgrading well's vsr 10 clone (MB03). I did some research on the topic but I want to be sure and get the confirmation from someone that did this before and has some experience. so, base rifle is well MB03 and the upgrade parts that I found are: -Action Army...

Hello! I've been messing around with my SRS A2 Sport for a while and I took it out for a few games at the field. It was pretty nice stock, but the hopup was downright annoying to set right as it took me an entire field day to adjust and the stock barrel might have been a lemon as it was quite...

Hi Guys, I find myself in the position where I haven't upgraded a VSR-10 in about 8 years and don't really know what the go-to options are these days for the Cylinder, Piston, Spring Guide, Spring, Sears and Trigger? I assume an r-hopped EdGI steel is still the way to go for the barrel still? I...

Hi, I bought an cyma sr25 not a long time ago and the first thing I did was switching the barrel and bucking. Right now I only have a problem with it is double feeding or not being able to hop my 0.28 or 0.32 BB's. I will try again today with a different mag and if that doesn't work I will...

Hello my friendly neighborhood technicians! As the title implies, I'm in a quest to find a decent air volume ratio between cylinder and inner barrel. In a nutshell, I'm going to build a DMR AEG (M4 w/ be gearbox) for a friend. Currently he is running .32s but he wants to start using .36/.38 so...

Airseal between nozzle and solenoid, when thumb is held on nozzle, air escapes from the solenoid or in between the solenoid and nozzle when firing

I Bought a AAC T10 not too long ago and was wondering about some upgrades to do to it. This is what ive done to it: AAC T10 Black AAC Red Hop-Up Maple Leaf Autobot 80% Tridos TDC 2.0 With Black Tridos Nub Maple leaf Suppressor(Going to fill it with something but im not sure what) Teflon on...

Hello. I have been having problems with left curving shots. Things I have done/checked: Removed and put on the scope, scope rings and adjusted the scope to be as aligned as possible. Dissasembled the rifle to check the hop up chamber, all parts look good from what I could see, some dirt on the...

Hey guys, I have a question related to the piston speed, acceleration, mass relationship with hopup effect. Basic data: Novritsch SSG10 A2 Barrel: 6.04 Crazy Jet 428mm Hopup system: vertical pressure TDC, screw based, with concave tensioner Hopup rubber(s): Snipetor 75° R-hop, Maple leaf MR hop...

So i got this pistol about a year ago now, and its been getting worse. I have 2 so I can verify everything I'm saying. This is a grey edition(not sure if it matters or not) and someone had a short-stroke kit in it when i received it. Its always had this problem with the trigger sometimes not...

My gun has gave me nothing but fighting issues lately. im pretty sure its due to have an original cylinder and head, but the 45 degree piston( I think its action army) dosen't completely seal and air escapes. But if i put the original back in, it seals just fine? But i cannot use the original...

And assembled it after initial cleaning it, and the first time I racked the bolt it was stiff and I noticed a mangled tiny o-ring right in the breach. I removed it and the pull was perfect, and it seems to feed and shoot OK for an untuned gun. So where the heck did that o-ring come off of?!? I...