I have a severe problem with JJ-Airsoft L96 trigger on Well MB01 I´m building.
All works fine with stock trigger but with JJ trigger the piston won´t lock. Yeah I know, dont buy cheap stuff but the customer wanted it...
The pistonsear seems to be about 1,5mm further back than on...
Well, i have the copy of the PDI V trigger (JJairsoft) i know some guys arround here have it too, But that trigger only is a one stage trigger. Do you think it could be modified in to a two stage trigger?
I'm looking to upgrade my trigger assembly for my MB08 (MB08 - BLACK [WELL TGG] - Sklep ASG TaiwanGun.com) but i'm not shure which trigger will fit my rifle. Looking for options and insight if anyone upgraded a MB08's trigger. Thanks!
Currently, I have an l96 aws 45 degree trigger and I see all kinds of "out of stock" and super expensive "zero" triggers. Can one just purchase a new piston catch for their trigger? Essentially converting the 45 to a zero without a massive bill?
Obviously the trigger needs to be upgraded but with a lack of available parts online I have a few questions about stock triggers on the VSR's
TM Vsr 10
Well Mb models (also the mb44XX models)
What can the stock triggers handle? What can an upgraded 45 degree trigger handle...
hope to get some help here on my problem:
just installed the Action Army S-Trigger Set,
had some problems during installation (piston sear wouldt catch the piston) but I managed to get it working,
I really like the new trigger set,
I got 15fps, the bolt pull is really easy now
I'm planning on upgrading my TM VSR G-spec with Edgy's kit. I have two questions:
1. I want to achieve 600 fps, is it better to get the 550 fps kit (I heard the spring gets weaker over time), or the 650 fps kit (but then shorten the spring to get 600 fps), or can I just ask him to customize it...
My mate's VSR10's trigger stopped working and we've narrowed down the faulty part, it's the little tension spring that resets the sear after you pull the trigger.
Does anyone know the specific dimensions of said spring? Don't really know what to look for when it comes to this type of...
Hello fellow snipers!
I need a bit of help with the Ares MS338. I bought it from redwolf airsoft and it came with a quite decent cylinder, aluminium piston and spring guide and a 90 degree trigger.
My main problem is the trigger. The dang thing is getting used up quite quick and im searching...
WTS: VSR-10 90° trigger-Bulltrigg
I want to sell my custom made 90° trigger for VSR-10 and copies called Bulltrigg. It incudes a mounting screws and washers. Your get a lifetime warranty with it. For installation and more info visit: http://flokipoki.wixsite.com/bulltrigger
Hey, I was wondering if any of you could help me out w/ upgrading my stock TM VSR 10. I have a few questions:
1. Do you need to change the cylinder to shoot 550fps? (i.e. Will it break?)
2. What trigger do you recommend buying? Laylax is just too hard too find/too expensive, PDI is (as far as...
Hey guys can you give me a hand, my vsr is acting up a little bit. Basically I had to take the receiver out of the stock because the spring guide stopper came loose and so I put it back in and secured it with electrical tape, after that i decided to mess a tiny bit with the trigger pull and...
S-trigger for Tokyo Marui VSR-10
The main characteristics
Durable, robust 90° design prepared for strongest upgrades
Preserved safety function
Adjustable trigger stroke
DROP-IN ( no modification needed to gun or trigger guard )
Optimized trigger pull ( around 0,5 lb )
Versatility ( TM...
Got a full Laylax VSR10 here and as the title says, It wont hold the piston back. Started off that you had to pull the bolt back a few times before it actually held it back and when I disassembled it, I checked the 2nd sear of the trigger unit and its A LITTLE worn down...
Hello all! I am asking for your help. I would like to install a mosfet on an AUG A1. The problem is not that I don't know how to install it, because I've found enough drawings for AUG/P90, but what mosfet to choose for a trigger in 2 steps.
In the descriptions from the websites, nobody says if...
I recently installed SHS 1st and 2nd sears into my bar 10. I compared the new sears to the stock ones, and after minor sanding, installed the new sears. the cylinder cycles fine, although the trigger will not fire the gun. The trigger will pull slightly back, and stick, and the...
Hey guys I have a CA M24 that is about 90% upgraded with only a new barrel and a new trigger to go. I finally put everything together on it and when I want to push the bolt home it would not go all the way back into the gun, leaving about 1cm gap; preventing me from lowering the bolt handle. I...
I wanna ask something about 2 trigger box.
2) CNC spou??ový mechanismus L96 pro MB01, 04, 05, 08... - AirsoftPro.cz
Are those two trigger boxes same ? I...