Search Results for ‘upgrade’

Recently bought myself an A&K SVD bolt action, and want to upgrade it with an M170 spring, but as I've never upgraded a rifle, I don't know what other parts need to be changed in order to accomodate the increased pressure, etc. Help?

So, I recently picked up one of these. For backyard play with a few friends its not too bad but it could always be a bit better. I want to get some upgraded parts for it, higher fps and range being a priority. The stock barrel can't take new muzzles without dealing with drilling out pins and...

Hi all, I have just joined and have (one way or another) ended up with an ASG M70 Varmint. After tearing it down and checking it out and reading online I see it is going to be a lot more work to tune and upgrade than a true TM VSR-10 or any fully comparable clone. My goal would not be too...

Hi Guys, I want to go and buy myself a sniper rifle and upgrade it (as many others probably haha). I've been doing a lot of research and tried to learn everything possible before starting to work on my list of upgrades to prevent any bad purchases and then as an end result having a bad sniper...

So I'm looking at buying a Novritsch tuning kit for my TM VSR 10 G-spec, However I'm presented with the issue of do I go for the standard 303mm Barrel or the longer 503 Barrel that goes right to the end of the suppressor? I've read that longer Barrels don't necessarily add accuracy but the...

Hello airsoftsniperforum, I'm new at upgrading weponds, and i was wondering what a aw .308 sniper use for upgrading it. I want it to shoot faster, hit harder and be very precise, and what do i need to change that? How long it the inner barrel? and what m/s can i get it to shoot with 0,20g bb's...

Hi, Newbie here. I am planning to buy a Tokyo Marui VSR-10 G-spec in the near future because from the small research I've done, this rifle can arguably be a good go-to rifle because of its quality, availability of parts, and its strong power when upgraded properly. Now, I wish to upgrade it as...

Hi guys here i present my Echo1 M28 so you can ser how is well is built nos and some others fotos of a new stainless steel cylinder and other for a custom trigger system that im trying to make base on the PDI v-trigger

Hello, I'm from England and I'm looking to get an MB-01 to get into sniping. I have done A LOT of forum lurking and research and this forum has been seriously helpful so thank you. I have all the things ready for DIY mods to do initially once I get the MB-01, teflon tape for threads...

Hello, So my hopup is a stock action army hopup, What do I need/should upgrade to get the best performance from it. If its an item can you post a link? Thanks, Elsa

Hello, since I will be in japan for the next few months so I decidet to get some parts from X-Fire to completely upgrade my VSR 10. I read almost everything about upgrading it in this forum here and just want some experienced members to check out my shopping list and optimize it. I bought the...

Hello y'all, So I have built my HPA gun with the SDiK. As i'm really new to HPA guns, i'm wondering on how to make it quieter without lowering the output of air. I've seen people using a mock suppressor in their guns. So, which suppressor should i get?

Hello y'all, So i've been hearing about this for a while, and it seems to be LOADS better than the original vsr-10 upper platform. What is it i'm talking about? Well it's the VSR-X. Well I would like to get one, but it seems you have to build it... I would like to know in order: 1. How do...

Hello y'all, I'm thinking getting rid of my AA HopUp for the PDI HopUp. I'm also getting their AEG cut sniper barrel. Since I had a full AA VSR-10 build, I was wondering if the PDI HopUp would be compatible with the AA Teflon cylinder & head. Thank you, Elsa

I'll start by saying I'm not the most experienced airsoft sniper, after buying my VSR10 G-Spec I straight away started looking into upgrading it. I've so far replaced the spring and switched to a madbull reinforced hop bucking to deal with the extra FPS. The issue I'm having is that after taking...

Hi guys, I´m new to this forum, and relatively new to the sport. I´ve always had a knack for trying to be a sniper, so a while back i purchased a WELL MB4406 (Yes, money was tight lol). The info in the description said that out of the package it fired 400 - 430 FPS, no way. Havn´t had the...

Hi forum! I resently bought a Well MB-02g, and I'm looking to upgrade within near future. I have picked up a few questions though, which I would like your opinion on :yup: First of all, reading the interwebs, it seems as AirsoftPro is the go-to when bying a new cylinder for the rifle, because...

Hello forums, Looking to buy or trade an action army hop up unit. Let me know what you have. *Also looking for other vsr10 upgrades. Trades I have: Harris style bipod Bolle Tactical goggles Stock TM G-spec (303mm) Barrel Stock TM G-spec sears Stock TM G-spec Bucking Stock TM G-spec HopUP...

Hi everyone, first time here so please bear with me. I've decided to upgrade my ASG AW .308 rifle. And I'm trying to change the cylinder, however I can not remove the bolt handle at all. I've removed the grub screw located underneath the block but the screw (I'm guessing is a screw) just will...