Airsoft Sniper Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 167 Results
  1. VSR Rifles
    Hi, I have a problem with my Maple Leaf VSR. When I pull the bolt all the way back it sometimes "locks" the piston but I cant push the cylinder back. Also sometimes the the piston wont lock at all. The sear in the triggerbox does move freely. What I noticed, when I remove the stock and push the...
  2. VSR Rifles
    Hello everyone, i see that a lot of inside parts are made from steel and also included a 90° trigger system. My question is what can I update and if possible someone tell me a very good build. I'm planning on using 0.45g bb's at around 3Joules. I'm new to sniping but been in the airsoft for over...
  3. For Sale
    Getting out of airsoft, open to offers, Buyer pays shipping, I'll pay PayPal fees. There is damage to the stock where the receiver is screwed in, I've tried my best to show this in the pictures. Taring carving stock Pdi bull barrel PDI receiver AA hop up Edgi 6.01 barrel Maple leaf bucking...
    $650 USD
  4. VSR Rifles
    Hello folks, I recently upgraded my my ssg10 bucking to an autobot 2021 silicone 70degrees and bought an action army 50rnd mag. After installing the new bucking and mag, it won't feed unless I apply pressure to the bottom of the mag. Usually the mags are flush with the lower half of the gun but...
  5. VSR Rifles
    So I have shot ≈200 bbs with my new vsr-10 and the AA chamber already look like this and the second bb stopper is not as same place as the first one. I guess I should do the quide sleeve for my cylinder or something. Also my bucking was dirty as hell because my stock cylinder head had pushed lot...
  6. For Sale
    Selling my excellent condition model works m40a3 stock. Slight sanding to the mag well but nothing major. Never use in game. Missing two bump stock extenders. Please message me for and more details and pictures.
    £180 GBP
  7. General Sniper Talk
    So here temperature can be +30C to -30C. I still play more on summers than on winters. So I was thinking should I buy silicone 2023 autobot bucking or regular rubber. Also what degree you would recommend to 2.2J with 0.45g bbs? Thanks!
  8. General Sniper Talk
    I was wondering if the jg376 is a good upgrade platform? Anyone have experience with this riffle? It is quite cheap
  9. VSR Rifles
    So I currently have an airleak going on on my AA chamber and i need a bit of assistance on fixing it. I am pretty sure the air is leaking from my hop up rubber and nozzle connection point. It isn't a huge issue because I could just cover this hole with strong tape and it was shooting fine...
  10. VSR Rifles
    It is my understanding that the cyma cm701b-u comes with a upgraded trigger(90degree), metal guide and piston and a better cylender that the old cm701b and a more powerfull spring 560fps I am considering to buy this gun. As my old well mb06 just went apart inside. (Broken cylender) What would...
  11. New Member Introductions & Tips
    Hi All, I’ve been a long term lurker on this forum, and have learnt a massive deal of information from it throughout my sniping career. My aim has been to make the best, most accurate and reliable Airsoft sniper. My rifle of choice is a TM VSR10 with the following upgrades: Externals Maple...
  12. Project Guns
    So after a lot of research and videos I have decided to build my own custom rifle. I have derived a lot of inspiration from the Vsr-x and Vsr-r projects by Reliku and Careful with just as much from some of Blindsniper's videos. I still have much to do and a lot of prototyping to go through...
  13. Wanted
    Hi there. I looking for an original Tokyo Marui VSR-10 45 degree trigger unit that is in a good condition.
  14. Bolt Action
    Hey folks! So recently I snagged a JG Bar 10 pre-owned for $60. It is currently on its way. My plan is to turn this thing into a HPA beast using the Wolverine Bolt engine. Here is my list so far JG Bar 10 -$60 Wolverine Bolt - $300 Action army hop chamber - $60 Autobot 70 deg silicone Bucking...
  15. VSR Rifles
    I have recently been looking into getting an airsoft sniper. I have heard many good and bad things about Novritsch which is making me pretty confused. When it comes to the sniper I have been looking into the CM.701B upgraded or the SSG10. From what I have seen the SSG10 seems like a decent...
  16. General Sniper Talk
    I want to run a VSR-10 with a charging handle instead of a bolt (because ambi and why not). The issue is that not only do I have an arm injury, I suspect that it'd put a decent amount of strain on the bolt system by charging an M150 with a charging handle. My question is that, similarly to HPA...
  17. Bolt Action
    Hi everyone, Currently I have 3 inner barrels from Maple Leaf which are left from previous builds or bought but never used 🥲 1. ML crazy jet 6.04 550 mm 2. ML crazy jet 6.04 300 mm 3. ML 6.04 430 mm (simple barrel) What's your opinion on the best barrel length to use in combination with...
  18. VSR Rifles
    Hey hey there good people! ~ Here's little info before I get into build details: I've been reading through forums, guides and anywhere that I could get as much info possible on VSR-10 builds, but I've got plenty more questions, becouse all those builds are limited by the joule rules of their...
  19. VSR Rifles
    Hi everyone, So I just build my first VSR-10 and managed to figure out most of the problems on my own, but with this one I'm just clueless. To start with the parts I used: SCW Piston SCW Spring Guide 9mm Maple Leaf Zero Trigger AA Teflon Cylinder+Head And when it comes to springs i don't...
  20. VSR Rifles
    Newish player would like your advice on this VSR10 build and upgrades> Current: JG Bar10 AA 6.03 430mm barrel AA hop-up chamber ML concave nub ML bucking rest is stock, I put these parts in a couple years ago. I plan to get: laylax sp150 spring AA trigger unit and piston ML autobot 70 bucking...
1-20 of 167 Results
Top